Question about 1994 Ford Tempo

Open Question

92 tempo v6. need pully diagram. belt has way too much slack

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

bschilz
  • 2049 Answers

SOURCE: I need the serpentine belt diagram for a ford

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

Posted on Oct 27, 2009

c17hydro
  • 2984 Answers

SOURCE: i need a serpentine belt diagram for a 97

Here ya go...

16227e1.gif
Serpentine drive belt routing-GM “C and H” Bodies 3.8L (VIN 1) engine

Posted on Nov 02, 2009

digritz
  • 530 Answers

SOURCE: I need a serpentine belt diagram for adodge

Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
bfce879.jpg

Posted on Nov 17, 2009

  • 1757 Answers

SOURCE: diagram for 92 acclaim serpentine belt

For the 1992 Plymouth Acclaim:
Click on the following free, direct Link. It has several Seprentine Belt Diagrams, including one to match your specific 1992 Plymouth Acclaim with the unspecified Engine: 2.5L SOHC In-Line 4-Cylinder or 3.0L SOHC V6; and the unspecified Engine Options (AC/No AC ect.)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1992/make/plymouth/model/acclaim/1992_plymouth_acclaim_drive_belt_routing_diagram.htm

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change belt


in order to change a belt you need to first find the belt diagram that fits your engine it should be right there as soon as you pop the hood but if not google your engine and belt diagrams for it then after all that is done and you get to a certain point where you may think the belt isnt long enough but it is i promise all you have to do is put a wrench on the pully and push the wrench away from you until the pully lifts (you may need a cheater bar) and that should give you the slack you need

Apr 14, 2012 | Cars & Trucks

2 Answers

The serpentine belt on my 2002 PT 2.2L CRD limited cruiser has snapped. I have a replacement one, but can't find a workshop manual locally. I need to fix it today as I need the car for work tomorrow. can...


You will need to turn the adjusting bolt in order to be able to have enough slack to place the belt around all the pully's. Don't forget to loosen the locking nut. I believe you have to turn the adjusting bolt clockwise to move that pully in order to be able to route the belt and place it over all the pully's but don't quote me on this. Common sense will tell you which way the pully moves to make more slack in order to put the belt around all the pully's. You can see how it is routed as well as where the adjusting bolt is located in the diagram below. Check all the pully's that the belt goes around to make sure they all spin freely to make sure none of them locked up and that this was the reason your belt snapped in the first place. I hope this helped and good luck. Have fun at work tomorrow....Here's your diagram:

clifford224_79.jpg

Feb 23, 2011 | 2002 Chrysler PT Cruiser

1 Answer

Replace a serpintine belt on a lincoln mark 7 1997


If your asking how. It's simple make a diagram of the belt routing (there might be a diagram on the frame under the hood). Ther is a tentioner pully that holds the belt tight. Get a ratchet with the proper socket fit it on the nut n the center of the tentioner and you can pull the tendioner pully as to le6t the belt have slack. then carefully take it off of the pully . youll have to twist and wiggle it to come out from behind the fan then install the new one in reverse

Sep 09, 2010 | 1997 Lincoln Mark VIII

1 Answer

Install a serpentine belt on 1994 ford tempo


under the hood should be a dieagram on proper install follow the pictures you will need a 3/8th or 1/2 in drive ratchet for the idler pully make shore to seat the belt in all the pullys good luck cj

May 14, 2010 | 1994 Ford Tempo

1 Answer

Is there a tension pully for the serpintine belt on a 92 honda accord


no, you set the tension by slackening the bolts on the alternator and using a long handle screwdriver wedged between engine and alternator tighten so that the longest part of the belt between pulleys has about 1/2 to 3/4 inch slack too tight and the belt will snap very soon....too slack and the belt will slip...

Mar 24, 2010 | 1992 Honda Accord

1 Answer

Belt diagram for 92 tempo 3.0 v-6


My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1992/make/ford/model/tempo/1992_ford_tempo_drive_belt_routing_diagram.htm

Feb 15, 2010 | 1992 Ford Tempo

3 Answers

I need a serpentine belt diagram for a 1992 chrysler lebaron 3.0 liter v6


1992 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Serpentine Belt Diagram Alt., P.S., Idler & Tens.

669b86a.jpg

More details you can find in DAYCO Catalog

I hope help you whit this (remember rated this help) Good weekend.

Oct 02, 2009 | 1989 Chrysler LeBaron

1 Answer

Need diagram for how the belts are run on a 1984 GMC Jimmy V6


I did not pay attention  but figured it out the alternator had a dual pully on it and the parts store sold me one with single pully. Took dual pully of old one an put on new one, the rest was easy.

Sep 06, 2008 | 1984 GMC S-15 Jimmy

Not finding what you are looking for?
1994 Ford Tempo Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...