Question about 2007 Toyota Sienna
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are two fuses for the radio...RADIO No. 1 and RADIO no. 2
RADIO No 1 is under the hood in the engine compartment fuse box
RADIO no. 2 in in the fusebox under the dash, on the left side of the instrument panel.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Jan 14, 2009
This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.
Posted on Aug 23, 2009
If the light was flashing when it came on, then it means your engine is misfiring.
A solid light can mean anything from a loose/faulty gas cap to a transmission issue.
This light comes on when the computer detects a fault of some sort in its diagnostic tests. If it keeps detecting this issue, the light will remain on. If the light turns off, then it has detected that the issue may no longer be present.
In order to find out what the exact reason was for your light, You need to have your car computer scanned to retrieve the code that the computer would have stored when the light triggered. Most garages will do this free of charge. The code will tell you what may have caused the light to initially turn on.
Posted on Oct 05, 2009
I would have them check the starter, Must be drawing a small amount of power even when the key is off...I have seen a few vehicles do this...
Posted on Feb 12, 2010
Tips for a great answer:
Sep 30, 2016 | Toyota Sienna Cars & Trucks
Mar 27, 2016 | 2007 Toyota Sienna XLE
Dec 01, 2014 | 2007 Toyota Sienna XLE
Nov 20, 2014 | 2004 Toyota Sienna
Sep 11, 2014 | 2014 Toyota Sienna
Dec 01, 2013 | 2005 Toyota Sienna XLE
Jul 24, 2012 | 2007 Toyota Sienna
Dec 08, 2008 | 2000 Toyota 4Runner
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: