Question about Chevrolet Impala

1 Answer

Diagram for where the canister purge solenoid is located on a 2002 chevy impala

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 5,332 Answers

3.8 liter - remove the engine cover. As your standing in front of the vehicle it will be located on the passenger side of the engine inbetween the intake plenum and the valve cover. It will have three wires going to it and to vacuum hoses.

3.4 liter - it will be either mounted to the intake plenum in between the throttle body and the EGR valve. It could also be mounted to the coil/module bracket on the backside of the motor in betweent the motor and the firewall. I think its new enough that it should be in the first location I described.

Also on the under side of the hood (if its the original hood) there should be a sticker with a vacuum diagram and the basic location of that solenoid. The sticker could also be mounted on the upper radiator support or the strut tower on the passenger side.

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of the Vapor Canister Purge Solenoid on a 2006 Buick Rendevous


Here is a link for locating/replacing the canister purge solenoid on a 2006 Chevy Impala. I couldn't find a video for your Buick, but I suspect it may be located in the same area - near the fuel filler neck. How To Install Evaporative Emissions Canister Purge Solenoid 2006 12 Chevy...

Jan 11, 2016 | 2006 Buick Rendezvous

1 Answer

Where is the purge valve solonoid


Shop for Where is the purge valve... on Google


2000?2001 Chevrolet Imp...
$22.04
Partsgeek.com 2000?2006 Chevrolet Imp...
$18.44
Partsgeek.com 2000 Chevy Impala Air Inje...
$80.95
Google Trusted Store1A Auto.c... 2000?02 Chevy Impala Air Inje...
$80.95
Google Trusted Store1A Auto.c... Standard 2005 Chevrolet Imp...
$26.69
Google Trusted StoreAutoParts... Search Results

    How To Install Replace Vapor Canister Purge Valve 3.4L ...

    ? 2:42
    https://www.youtube.com/watch?v=IPKnoxJCIWk
    Jul 9, 2014 - Uploaded by 1A Auto Parts
    http://www.1aauto.com/vapor-canister-purge-solenoid/i/1aemx00137 In ... How To Install Replace PCV Valve3.4L 2000-07 Chevy Monte Carlo ...

Dec 19, 2015 | 2000 Chevrolet Impala

1 Answer

I am unable to locate the Vapor Canister Purge Valve on my 2006 Isuzu Ascender LS 6 Cyl. I have a hard code with the check engine light on and I am unable to reset the check engine light. I purchased the...


Hello had the same problem in my 2006 Isuzu I-280 I needed to
replace at this moment the Evaporative Valve Soleniod which is instaled next to the Vapor Canister. It is mounted on the frame behind the gas tank you will have to move the spare tire out of the way one bolt holds it in place this is where the canister is and the valve is mounted on the canister this is where it is mounted on my 2006 I-280. If you need to replace the solenoid and you can't find the original Isuzu part, you can ask for the 2006 Chevy Impala V-6 3.5 Purge Valve Solenoid. It is the same piece. The old Evaporative Vent Valve Solenoid has a number part PA-GF30, and it is the same part number I found in the new Chevy Impala Evaporative Vent Valve Solenoid.

Aug 08, 2013 | Cars & Trucks

2 Answers

I have a 2006 Isuzu Ascender with a 6 Cyl. 4.2L Engine and I need to locate the Vapor Canister Purge Valve. Any ideas where it is located. I have looked but am unable to locate it. Is it under a plastic...


Hello have a 2006 Isuzu I-280 and I needed to replace, at this moment, the Evaporative Valve Soleniod which is instaled next to the Vapor Canister. In my case, It is mounted on the frame behind the gas tank you will have to move the spare tire out of the way one bolt holds it in place, this is where the canister is and the valve is mounted on the canister this is where it is mounted on my 2006 I-280. If you need to replace the solenoid and you can't find the original Isuzu part, you can ask for the 2006 Chevy Impala V-6 3.5 Purge Valve Solenoid. It is the same piece. The old Evaporative Vent Valve Solenoid has a number part PA-GF30, and it is the same part number I found in the new Chevy Impala Evaporative Vent Valve Solenoid. Good luck.

Aug 08, 2013 | Cars & Trucks

1 Answer

Need to know where to find the canister purge valve


For the location of canister purge valve,check the following help links mentioned below:--
Click the link :---

Location for EVAP Purge Valve Solenoid?

http://schematicsdiagram.blogspot.in/2012/06/2002-nissandatsun-pathfinder-location.html


------------------

How to disconnect the hose form the Evap Canister?

http://schematicsdiagram.blogspot.com/2011/12/how-to-disconnect-hose-form-evap.html

-------------

2004 Chrysler PT Cruiser: Location of EVAP Purge Solenoid Valve?

http://schematicsdiagram.blogspot.in/2012/06/2004chrysler-pt-cruiser-location-of.html

-----------
These will help.
Thanks.

Jan 08, 2013 | Cars & Trucks

1 Answer

On a 96 impala, where is the purge solenoid located?


Look on the underhood sticker. Locate the emissions canister (or charcoal canister). The skinny line coming from it is the vacuum line. Follow it, and it should lead you to the canister purge solenoid.

Aug 26, 2011 | 1996 Chevrolet Impala SS

1 Answer

Were is the evap located on 2001 Chevy s-10 blazer with v6


The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.

47e8f38.jpg

Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve


4d7b3e9.jpg

Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator (1) on 2000-2005 4.8L, 5.3L, 6.0L Engines

Hope this help (remember rated the post).

Mar 26, 2010 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,056 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...