How do I add transmission fluid to my 1992 Saturn SL2?

With the car parked on a level surface start the engine. Remove the transmission dipstick and wipe clean. Reinsert the dipstick and pull out again. The level should be somewhere between the cold and hot markings. If it is low that start by adding 1/2 quart through the same tube that the dipstick goes into. You may have to purchase a small funnel that will fit into the opening.

After adding the fluid wait a couple of minutes for the fluid to settle out of the tube. Recheck the level. If still low continue to add in 1/2 quart increments until the fluid shows up in the cold level area.

The engine should be running and in park the hole time your are doing this.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa