Question about 2005 Saturn VUE
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a outstanding question!!! The plugs or wires are not visible from the top or sides of the moter. You just can't see em'!!! You have to remove the large black plastic air intake. Then remove the intake manafold(not too hard to do) to access the spark plugs and wires. Also: After removing all the black plastic air intake stuff, you'll have to remove the coil pack (long black plastic thing that says "Ecotek" on top). The coil pack is removed by disconnecting the wire connector on the driver's side end and then removing four bolts. To lift off the coil pack, you'll have to pull upwards firmly and evenly from both sides, because the spark plug boots or wires are holding onto the spark plugs as well as the coil. With the coil pack removed, look down into the silver channels - there's the plugs. To remove, you'll need a plug socket head and a socket wrench with long extension. To replace the plugs, I use an extra or old spark plug boot to hold the plug and get it started turning into the engine threads. Good Luck!
Posted on Jun 09, 2009
SOURCE: spark plugs on 2002 Saturn vue
just completed a plug removal and install on my '02 awd v6. if you have the time and patience it's straight forward; common sense was most helpful. to gain access to the plugs, both fore and aft, you must remove, in short, everything near to, associated with, the air intake system. common tools plus a 1/4 socket, with 8 inch extension to hold a #10 star bit. these star bolts are under the rectangular plastic plate atop the intake. once you have those out, disconnect all the wiring, carefully. lift the intake out, look for plug covers, fore and aft, ignition assembly lays atop each row of three plugs. with the hands of a surgeon, remove the ignition assembly, and by golly ye shall see your reward. easy from then on.
replaced my plugs with the iridium 'honeys'; marked improvement in starting, acceleration, smoothnes, noise, and gas mileage to the value of + 3.0%. changed out the oil with mobile1 extended performance, changed transmission fluid. took a shower. time involved, 7.0 hrs. dealer be damned,,priceless!
Posted on Jun 28, 2008
SOURCE: 2002 Sayurn vue 3.0L
Under the intake manifold, it will need to be removed. Not too hard to do for the average diy but recommend buying a repair manual as a guide. you will need a 1/4" drive T30 torx socket with a long extension one of the bolts is hidden but the others are under the black cover on the top of the intake. you will also need to remove the coil pack held on with torx bolts. 8 or 10 inverted torx socket needed for that.
Posted on Aug 22, 2009
Tips for a great answer:
Sep 23, 2012 | 2003 Saturn L-Series L300
Jul 03, 2017 | 2006 Saturn Vue
Jun 12, 2011 | 2005 Saturn VUE
Feb 13, 2011 | Saturn Vue Cars & Trucks
Aug 19, 2010 | 2005 Saturn VUE
Jan 01, 2010 | 2005 Saturn VUE
Oct 24, 2009 | 2005 Saturn VUE
Mar 26, 2009 | 2002 Saturn VUE
Dec 22, 2008 | 2003 Saturn VUE
380 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: