Question about 2001 Toyota Camry

1 Answer

Were is the relay fuse for the high beam in the 02 camry

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 8,161 Answers

Your circuit is complicated. There are 3 DRL (DRL #2, 3, and 4)relays associated with the high beams. There are also 3 fuses for the high beams, one 5 amp for the indicator and relays and 2 20 amp fuses for the filaments. These are probably all in the engine compartment relay box near the battery. See the diagram below.were is the relay fuse - 57247d6.gif

Posted on Sep 29, 2010

Testimonial: "thank-you for your help it was a big help to me and solved my problem cheers carmen "

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: Headlight 2004 camry

your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Posted on Sep 01, 2008

  • 507 Answers

SOURCE: 2006 Toyota Camry....headlights will not come on;

there was a recall on the headlight switch up to 06 camrys,find out if your car is affected by calling Toyota with the chassis no,and month of build

Posted on Nov 01, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

  • 66 Answers

SOURCE: headlighbeamt cannot work on high beam

It could be in the switch for the low and high beam's

Posted on Mar 06, 2010

  • 23 Answers

SOURCE: camry headlights not working

Have you checked out the switch itself? Seems like the problem might be there.
If the lamp bulbs are sill intact, that's probably the most likely solution. There's a possibility you have a short somewhere in the switch relay that will allow the highlights to turn on but not the low beams.

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I started my 05 Toyota Camry one night two weeks ago, for the first time my high beams would not go on, what could be the issue, and how can I fix it?


1. Check the fuses for the high beam circuit. There is usually one fuse for the left and one for the right high beam.

2. If the fuses are OK, check the Relay (also normally found in the Fuse and Relay boxes ) for the high beam circuit.
There is normally one Relay for the Low Beam circuit and one Relay for the High beam circuit.

3. If the fuses and relays check out OK, there may be a problem with the high beam switch on your headlight controls.

Dec 27, 2015 | 2005 Toyota Camry LE

1 Answer

Low beams don t work but high beams work


Hi and low beams run on different fuses too. Check the low beam fuse. There might be a grounding strap not making good connection too.

Aug 27, 2014 | 1987 Toyota Camry

3 Answers

Daytime Running Lights Inoperative 2002 Toyota Camry


[Information] For a 2002 Toyota Camry, the Daytime Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to the center of the vehicle front) at a reduced power.

[The troubleshooting process:] Review the Owner's Manual and ensure the test configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."


2. Set the Test Conditions according to Step 1 above.

3. Check the headlight bulbs to ensure they are not burned out. If one burns out, there is a fair chance that the other would have burned out at the same time. Replace as necessary. In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]


My problem was that the test configuration did not have the engine running and parking brake off - Step 1. Problem solved with much thought, repetitive tests on the vehicle and going back to the basics -- what does the Owner's Manual say and where are the applicable fuses and relays located?

Dec 30, 2011 | 2002 Toyota Camry

2 Answers

Camry headlights not working


it sounds like a bad light switch

Mar 25, 2010 | 1993 Toyota Camry V6

1 Answer

Headlighbeamt cannot work on high beam


It could be in the switch for the low and high beam's

Feb 04, 2010 | 2001 Toyota Camry

1 Answer

Pass side high beam doesnt work 2000 toyota camry


Some cars have a different fuse on both high beams,one for lst other for right.

Jun 17, 2009 | 2000 Toyota Camry

2 Answers

Have High beams, but right low beam doesn't work


yes you are right it is the blub that need to be relace

Feb 01, 2009 | 1987 Toyota Camry

1 Answer

Headlight 2004 camry


your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Sep 01, 2008 | 2007 Toyota Camry

Not finding what you are looking for?
2001 Toyota Camry Logo

846 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...