Question about 2004 Jeep Grand Cherokee

1 Answer

Wire repair in left front A pillar is the repair bill I got Problem is the door unit is dead, can't roll up windows, lock driver door, and access any controls on door.

Posted by on

Ad

1 Answer

You need a new repair shop. Hope that wasn't a dealer. Don't want to know that,spare me.
They need to see if a scanner can communicate with the door module. Assuming you have one, and that sounds as though, what your referring to.
If they found issues in the A pillar,e.g. left window post or frame,it would have been taken care of,or why mention it.
Did you get it back not working?
Only A pillar wires would be for overhead console feed?
If scanner can not actuate window for any reason,you go to wiring diagram and work through the various circuits pertaining to windows,locks etc.
They may not have a data base they subscribe to,so no wire charts, or don't want that type of work,it takes too long to figure out and don't feel comfortable telling you how many billable hour it will take. That is most every vehicle owners problem. Shops can fix these things,but can't charge for it. If they spend the time ,they go out of business.

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wire came loose from driver door harness on 2000 grand prix


My service information say's that is a dark green wire . Door side connector ????? Where is this connector located ? In the door ,A pillar . I see three different connectors that wire is hooked into. Connector at the driver door master switch ,C-355 C-301
Check it out here http://www.bbbind.com/free_tsb.html Free wiring diagrams . Enter your vehicle info. Year ,make , model an engine size. Under system click on body & accessories ,then under subsystem click on power windows. Click the search button then the second blue link.
C301 (16 cavities)
Body wiring harness to the left front door wiring harness, behind the trim at the base of the A pillar

broken inside the flex boot from body to the door ?

Nov 17, 2017 | Cars & Trucks

1 Answer

2006 escalade the left side of the driver switches dont work, ie left side front or back windows wont role up or down and the unlock doesnt work. The lock side of the button works and the right side...


has the vehicle been in an accident around the drivers door A pillar? Sounds like there are some wiring issues inside of the harness or connector that goes from the body to the door.

Aug 22, 2017 | 2006 Cadillac Escalade

1 Answer

My 2006 F-150 drivers side control panel is dead & none of the electric windows, locks, mirrors or door sensor will work. I checked all the fuses & they are fine. The passenger door sensor &...


With the list you have, I would think broken ground wire in the rubber boot from the A-pillar to the door on the driver's side.
I have seen this one a few times ( not chronic but happens ).

It is a black wire in the door to a-pillar harness. SWAG at why the window worked when open part way, the wire touched at that one time, and pulled back apart again.

Example picture of a broken wire
sscullys_216.jpg

Sep 19, 2011 | 2006 Ford F-150

1 Answer

MY FRONT WINDOWS WORK PROPERLY AND THE WINDOW LOCK IS OFF AND THE REAR PASWSENGER WINDOW WILL ROLL DOWN BUT WILL NOT COME UP AND THE DRIVER S REAR WILL NOT GO DOWN OR UP NO POWER AT ALL


Most likely there is a broken wire between the drivers door and pillar. You would need to cut open the rubber boot between the door and pillar and check the wires. When wires get flexed a lot, they tend to break. You would need to solder the wires back together rather than using **** connectors.

Sep 27, 2010 | 1999 Chevrolet Malibu

1 Answer

2004 jeep gran cherokee door locks and windows do not work interior lite stays on


SOUNDS LIKE YOU HAVE BROKEN WIRES BETWEEN THE LEFT FRONT DOOR AND THE A PILLAR..OPEN DRIVER'S DOOR,YOU WILL SEE A RUBBER BOOT BETWEEN DOOR AND BODY..PEEL IT BACK FROM BODY OR DOOR AND LOOK FOR BROKEN/PARTIALLY BROKEN WIRING..THIS HAPPENS BECAUSE THE DRIVER'S DOOR IS USUALLY THE ONE USED THE MOST..YOU ARE BETTER OFF REMOVING DOOR PANEL AS WELL TO ACCESS WIRING END CONNECTOR SO YOU CAN SPLICE IN A NEW SECTION OF WIRE..USE THE SAME SIZE WIRE AND SOLDER/HEAT SHRINK CONNECTIONS..ALSO CONNECTOR HOUSING IN BODY WILL COME OUT OF BODY AND YOU CAN UNPLUG IT..TRY NOT TO HAVE ANY OF YOUR SPLICES IN BETWEEN DOOR AND BODY..WILL BREAK AGAIN..I HOPE THIS HELPS..I HAVE SEEN THIS PROBLEM BEFORE A FEW TIMES

Sep 23, 2009 | 2004 Jeep Grand Cherokee

2 Answers

Both doors on right hand side won't open anymore (manually or with remote control) How can I open them? Fuse is OK


You have 4 doors with 4 electronic modules. Front doors have "master" modules and rear doors have "slave" modules. Master modules are called DDM and PDM - Driver Door Module and Passenger Door Module. These modules communicate directly to the main computer via CAN bus.

But module in the rear door communicates only with the module in the front toor on the same side of the car via LIN bus.
So if the CAN communication channel is broken (wires may get broken where the doors are attached) then on that side of the car doors will not lock/unlock anymore, interior lights will not turn on, windows can't be opened and closed anymore from the remote control on that side of the vehicle. You may just repair the wires.

The other, expensive option is, that DDM or PDM electronic module is dead. Then take it to the shop for repair with the new module...

Aug 13, 2009 | 2006 Volvo V50

1 Answer

Short in electrical system


The electrical wires going to the power windows and speakers and locks all go through the A pillar and into the door down by where the hinges are at. When you open the door you will see what looks like a boot between the door and the A pillar, this is where the wires run through. After a period of time these wires inside this boot can become chaffed or broken and can short out and cause the problem you are having. You need to open the door and pull the boot towards the door exposing the wiring. You will need to inspect these wires very carefully and check for chaffing or broken wires and repair. The hardest part is finding the bad wire on this job. You might have to remove the drivers side kick panel and look where they come thru the A pillar. Hope this helps.

Lefty64

Apr 06, 2009 | 1998 Mercury Mountaineer

1 Answer

Passenger side dead.


Sometimes the harness at the front door will get a wire break in it. Try working the window switch on the passenger front door (ignition on of course) while slowly moving the door open and closed. If it starts to work, Jeep has repair kits still I believe where you can replace just the harness between the body a-pillar and door.

Mar 22, 2009 | 1997 Jeep Grand Cherokee

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

2 Answers

2004 GRAND CHEROKEE DOOR LOCKS


Ground wire (black) open between drivers door conector and door pillar due to flexing. Locate break and solder in some extra wire to relieve the stress when the door is used.

Sep 15, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...