Question about 2002 Chevrolet Blazer

1 Answer

I need to replace teh water pump on my 2002 chevy blazer. What is the easiest way of doing it? It looks like i need to disassemble the fan to get to it. Is there a way to work around that?

Posted by on

Ad

1 Answer

Forget easy. Easy, is when you have room to work on the water pump. Remove all things necessary to do the job. Take your time.
Good time to replace belts and free up alt,power steering,vac pump,etc,bolts and get them moving freely. Don't try to do less.Do more, and save time in the future,when your in there for something else.

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan clutch is noisy on my 2003 Chev Blazer. how do i replace it?


The fan clutch is bolted to the water pump with four bolts, and the fan itself bolts to the clutch with four bolts. The easiest is to unbolt the fan clutch from the water pump since the fan may not clear the shroud. Once the four bolts are removed from the water pump the fan should drop down, and you should be able to wiggle it up and out. If not then remove the shroud which should have two bolts on each side. Remove the fan from the clutch, bolt the new clutch on, and do the reverse of removal. Depending on accessories you may have to remove the upper radiator hose but normally you can wiggle the unit out. Do not remove the pulley since this will only add extra work and frustration.

May 15, 2014 | 2000 Chevrolet 2500

1 Answer

I need to change out a water pump on my 92 full size blazer.


u might be able to just remove alt and fan and maybe not. Only other things that might needed to removed is a/c compresser, power steering pump and fan shroud (((you dont have to remove shroud but makes it alot easier)))

look at water pump and look to see what all in way of getting to all the bolts

Apr 07, 2010 | 1992 Chevrolet S-10 Blazer

1 Answer

Replace water pump


u need a special wrench to remove the fan from old pump the rest is pretty much like old chevy 350

Mar 20, 2010 | 2002 Chevrolet Blazer

1 Answer

2002 chevy blazer. Trying to swap out the water


The new chevys are a pain. There should be alot of little nuts on the top of the shroud possibly under a small piece of weather stripping. There should also be 2 or 4 small bolts halfway down the shroud on both sides. Then there are 2 or 4 bolts on the bottom of the shroud. It should end up in two pieces with one piece coming out the top and one out the bottom. Removing the shroud most of the time is not necessary but it helps.

Feb 03, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

I need to change the water pump and I need to know the proper way to do it for a 1997 Chevy Blazer LS 4.3 litre.


First you need to drain down the coolant, secound take top of fan shrould off 2#10 bolts on each side, third loosen fan bolts, fourth take belt off, fifth take fan off, sixth unbolt anything that is bolted to water pump like power steering pump, maybe ac. pump heater hoses ect. last take 4 bolts out that hold water pump to block 2 on each side and thats it. Clean old gasgets off engine block and bolt on new pump with new gasgets witch will come with new pump. Put back to gether in reverse order.

Nov 22, 2009 | 1997 Chevrolet Blazer

1 Answer

I put on a new clutch fan and do not know how to reset it to the thermos stat


Clutch fans don`t need to set, they just screw onto the water pump, the heat from water pump travels into it to turn it on.

Oct 27, 2009 | 2002 Chevrolet Blazer

1 Answer

How to change a water pump?


You will need to remove the upper fan shroud, remove the fan clutch that is threaded onto the water pump it is easiest to get the tool for this or you can use a bar between two of the pulley bolts and use a cresent wrench on the big nut. After you remove the fan clutch there is the small hoses on the top of the water pump and the lower hose on the bottom of pump. Then there are only four bolts holding the pump to the motor. Reinstall in reverse order. Let me know if you need more help.

Jan 06, 2009 | 1999 Chevrolet Blazer

2 Answers

2002 chevy blazer fuel pump (4 door)


yes you have to drop the tank. you will also need a fuel line tool to unhook the fuel lines. before you drop the tank see if tou can reach and wiggle the electrical connection on the top of the tank. these pumps have a pigtail issue. please rate

Dec 08, 2008 | 2002 Chevrolet Blazer

1 Answer

2001chevy blazer


it is not to hard to change the pump but you will need a fan clutch tool. the water pump is on the front of the motor with the fan attached to it.

Dec 02, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...