Question about 1999 Chevrolet Silverado 1500

1 Answer

I have a 96 k1500 chevy truck and have 4 codes that pop up on the check engine light randomly. Codes are ckp A signal intermitent, cmp out of range, idle contol rpm to high, O2 bank 1 sensor 1 insuficent switching. All in thay order. When light comes on runs missfiring bad until check engine light turns off. Any suggestions.

Posted by on

  • Zaraki Sep 29, 2010

    Do you know what the actual DTC's were (Data Trouble Code)? They should start with either a P-zero or a P-one. (for example P0100 or P1100)

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

O2 sensor cross talk bank to bank irregular, change 02 sensor(s).

Sounds like Idle air control sensor bad, All of your codes interact, I would start with 02 sensor.

I would locate a Tech II and run a diagnosis, eliminate guess work.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 GMC AcadiaSLT2 that is having all sorts of electrical issues. ServiceStabilitracLight on,Traction Control off light, Oil pressure low stop engine. Throws codes P0017,P0016,P0102,P0113,P0700.


DTC P0016: Crankshaft Position (CKP) - Intake Camshaft Position (CMP) Correlation Bank 1

DTC P0017: Crankshaft Position (CKP) - Exhaust Camshaft Position (CMP) Correlation Bank 1
A camshaft actuator stuck in the full actuation position may cause the engine to crank but not start.
The camshaft position (CMP) actuator system is an electro-hydraulic operated device used for a variety of engine performance and operational enhancements. These enhancements include lower emission output through exhaust gas dilution of the intake charge in the combustion chamber, a broader engine torque range, and improved fuel economy. The CMP actuator system accomplishes this by changing the angle or timing of the camshaft relative to the crankshaft position. The CMP actuator simply allows earlier or later intake and exhaust valve opening during the four stroke engine cycle. The CMP actuator cannot vary the duration of valve opening, or the valve lift.
During engine OFF, engine idling conditions, and engine shutdown, the camshaft actuator is held in the park position. Internal to the CMP actuator assembly is a return spring and a locking pin. During non-phasing modes of the camshaft, the return spring rotates the camshaft back to the park position, and the locking pin retains the CMP actuator sprocket to the camshaft. The park position for the CMP actuator and camshaft is 8.5 degrees before top dead center (BTDC), which is equal to 17 crankshaft degrees BTDC. The engine control module (ECM) can only command the CMP actuator to retard the valve timing from the park position, or advance the valve timing back to the park position. The total range of valve timing authority is approximately 20 degrees of camshaft rotation, which is equal to 40 degrees of crankshaft rotation.
Problems with this will cause the PCM to disable traction control and Stabilitrac .How many miles on your vehicle ?
Chevy Colorado P0017 Case Study Part 1 GM is a GM , Chevy , GMC , Buick , Cadillac etc.....

Jan 15, 2017 | 2008 GMC Acadia SLT-2

2 Answers

2010 Chevy Equinox,Check engine light P0017, Service Stabilitrak comes on and the car loses power. Tried checking the EGR to ensure not stuck open and have had no improvement.


DTC P0017: Crankshaft Position (CKP) - Exhaust Camshaft Position (CMP) Correlation Bank 1
Which engine does yours have 3.4 or 2.8 , 3.0 , 3.2 , or 3.6 L Chevy Colorado P0017 Case Study Part 1

Dec 15, 2016 | 2010 Chevrolet Equinox

3 Answers

What is the code p0335 on 2012 chevy sonic


Follow the link for info on this OBD2 fault code. https://www.obd-codes.com/p0335

Dec 10, 2016 | Cars & Trucks

2 Answers

My truck sonoma gmc 2001 dont past the emission test


Definition of Diagnostic Trouble Code P1345 Audi: Ignition Coil Power Output Stage 3 Short to Ground BMW: Misfire Cylinder 2 with Fuel Cut-Off Buick: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Cadillac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Chevrolet: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Ford: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) GMC: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Isuzu: Crankshaft Position - Camshaft Position Correlation Kia: No SGC Signal (1.6L) Lexus: Variable Valve Timing / CMP Sensor Range / Performance Lincoln: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Mazda: Cylinder Discrimination Signal (from CMP sensor) Mercury: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Oldsmobile: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Pontiac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Saturn: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Toyota: Variable Valve Timing / CMP Sensor Range / Performance Volkswagen: Ignition Coil Power Output Stage 3 Short to Ground

Jul 19, 2015 | GMC Cars & Trucks

1 Answer

Maifunction indicator light comeing on


Trouble Code: P0340

No Camshaft Position Sensor Circuit Failure

Possible Causes:


CMP Sensor connector is damaged, open or it is shorted.CMP Sensor signal circuit is open or shorted to ground or to battery voltage or 5v supply circuit.CMP Sensor 5v supply circuit is open or shorted to ground or to battery voltage.CMP Sensor ground circuit is open.CMP Sensor is damaged or has failed.CKP Sensor is damaged or has failed.PCM has failed.Trouble Code: P0700

Automatic Transmission Control System Malfunction

Possible Causes:


.The presence of this code means the TCM detected a problem.TCM related Sensor has solenoid is damaged or has failed.This code is for information only - check for other TCM codes.TCM or PCM has failed.Sorry but the PO620 is not listed.

Nov 05, 2012 | 2004 Jeep Grand Cherokee

1 Answer

2005 chrysler 300c trouble codes p0344, p0016 p0061c


Trouble Code: P0344

Camshaft Position Sensor Circuit Intermittent

Possible Causes:


.Wiring harness fault.5v supply circuit open or shorted to ground.Tone wheel/pulse ring is damaged or corroded.CMP Sensor has failed.CMP Sensor signal circuit is open, shorted to ground or battery. voltage or 5v supply.CMP Sensor ground circuit is open.PCM has failed.Trouble Code: P0016

Crankshaft/Camshaft Timing Misalignment

Possible Causes:


.Base engine problem (i.e., the camshaft timing is not correct).Intermittent condition.CKP or CMP Sensor signal is erratic (check with lab scope).Tone wheel or pulse wheel is damaged or contains debris.CKP or CMP Sensor, harness or connector has failed.PCM has failed.Trouble Code: P0061

Engine Temperature Control Level 2 RPM Performance

Possible Causes:


PCM need to be reprogrammed.PCM has failed.

Oct 27, 2012 | 2005 Chrysler 300

1 Answer

Engin light is on when i check it by computer it gives me error P1336 [25,10,13,36] , please refer to relevant terchnical manual


The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight tolerance variations in the crankshaft, and the CKP sensors. The calculated error allows the powertrain control module (PCM) to accurately compensate for reference period variations. This enhances the ability of the PCM to detect misfire events over a wider range of engine speed and load.

The code P1336 is for a Crankshaft (CKP) and/or Camshaft (CMP) position sensor input signal to PCM concert. It is triggered if the input signal to the PCM for either of these sensors is erratic. Per the factory service manual, this can be due to:
- a damaged PCM
- damaged CKP sensor
- damaged CMP sensor
- base engine
- harness concerns.

The service manual suggests checking the following items:
- harness routings,
- alterations,
- improper shielding,
- or electrical interference from other improperly functioning systems.

To properly check the operation of the CMP and CKP, you'll really need an oscilloscope. The code is probably being triggered due to a faulty sensor or connection and not something that just needs to be reset.

Step / Action / Yes / No

1. Did you perform the Diagnostic System Check-Engine Controls?
Yes: Go to Step 2
No: Go to Diagnostic System Check - Engine Controls

2. Preform the CKP system variation learn procedure. Refer to CKP System Variation Learn Procedure. Did you complete the action?
Yes: Go to Step 3
No: Go to Diagnostic Aids

3. Clear the DTCs with a scan tool.
Turn OFF the ignition.
Start the engine.
Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does the DTC run and pass?
Yes: Go to Step 4
No: Go to Step 2

4. With a scan tool observe the stored information, Capture Info.
Does the DTC run and pass?
Yes: Go to Diagnostic Trouble Code (DTC) List
No: System OK


Diagnostic Aids:
The CKP system variation values are not stored in the PCM memory after a learn procedure has been performed. If the actual CKP variation is not within the CKP system variation compensating values stored in the PCM, DTC P0300 may set.

The CKP system variation learn procedure is also required when the following service procedures have been performed, regardless of whether DTC P1336 is set.
An engine replacement
A PCM replacement
A harmonic balancer replacement
A crankshaft replacement
Any engine repairs which disturb the CKP sensor relationship

If the CKP system variation learn procedure cannot be performed successfully, check for the following conditions and correct as necessary:
A damaged reluctor wheel
Excessive crankshaft runout
A damaged crankshaft
Interference in the signal circuit of the CKP sensor
A coolant temperature that is not within the Conditions For Running the DTC
The ignition switch is in the ON position until the battery is drained
A PCM power disconnect with the ignition ON may erase the stored value and set the DTC P1336

Hope helps.

May 05, 2011 | 2005 Ford Freestar

3 Answers

2007 aveo misfire faults


gm has a problem with this from way back. double check your spark plugs and if they are not ac delcos, change them. ive seen this time and time again swearing, myself, that there is no way that the plugs would cause this issue. it always comes up with random misfire and usually another 1 or 2 codes misfire codes. put in ac delco, no more codes. let me know

Feb 22, 2010 | 2007 Chevrolet Aveo 5 Hatchback

1 Answer

I have a 96 mistubishi eclipse with 2.0 non turbo that has a code p1391 can anyone help me please?????????


Tests/Procedures: 1. Check the Crankshaft Position Sensor (CKP) and Camshaft Position Sensor (CMP) signals with a lab scope.

2. Check the wiring and connections at the CKP and CMP sensor. Potential Causes: Camshaft Position Sensor (CMP)
Crankshaft Position Sensor (CKP)
Powertrain Control Module (PCM)
Wiring

Aug 08, 2009 | Mitsubishi Eclipse Cars & Trucks

1 Answer

Trouble codes


Trouble Code: P0139
O2 (B1 S2) Slow Response
Trouble Code Conditions:Engine started; vehicle driven at 20-55 mph with the throttle open for 2 minutes; ECT at more than 158ºF (70C); catalytic converter temperature is more than 1112F (600C); and EVAP purge is active. O2 Sensor signal voltage switches less than 16 times from lean to rich within 20 seconds during monitoring, or will compare the state of change between the front and rear O2 Sensors and if the differences are greater than a calibrated amount, the DTC will set. 3 good trips are required to turn off the MIL.
Possible Causes:
  • Exhaust leak
  • O2 element is contaminated, deteriorated or it has failed
  • O2 signal circuit or return circuit has failed

Trouble Code: P0344
Camshaft Position Sensor Circuit Intermittent
Trouble Code Conditions:Engine cranking or running; system voltage over 10.5v. The PCM detected an intermittent loss of the CMP Sensor signal during the period of 2.5 complete engine revolutions. The failure counter must reach 20 before this code matures and a code is set.
Possible Causes:
  • Wiring harness fault
  • 5v supply circuit open or shorted to ground
  • Tone wheel/pulse ring is damaged or corroded
  • CMP Sensor has failed
  • CMP Sensor signal circuit is open, shorted to ground or battery voltage or 5v supply
  • CMP Sensor ground circuit is open
  • PCM has failed
  • Trouble Code: P0340
    No Camshaft Position Sensor Circuit Failure
    Trouble Code Conditions:Engine cranking or running, system voltage over 10v. The PCM detected CKP pulses without detecting any CMP Sensor pulses for 5 seconds or 2.5 engine revolutions.
    Possible Causes:
  • CMP Sensor connector is damaged, open or it is shorted
  • CMP Sensor signal circuit is open or shorted to ground or to battery voltage or 5v supply circuit
  • CMP Sensor 5v supply circuit is open or shorted to ground or to battery voltage
  • CMP Sensor ground circuit is open
  • CMP Sensor is damaged or has failed
  • CKP Sensor is damaged or has failed
  • PCM has failed
Good luck....

Nov 05, 2008 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...