Question about 2002 Ford Escape

2 Answers

How do I replace rear passenger window regulator in 2002 Ford Escape?

Posted by on

  • dkrly1 Sep 28, 2010

    I got as far as your solution was shown on the screen. I got under the door panel just fine. that process is pretty universal. It's after removal of the door panel I need. I got some parts out of the door and propped the window up to keep it closed. It's replacing the regulator mechanizm that I need. I appeared that there was more to your response than showed on my screen, but I couldn't access the info.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,146 Answers

On the 2002 Escape, you remove 4 screws (1 under covers in upper corner near hinge, 1 under cover in recess of opening latch, one in door handle, one on door edge). Then there are only pop-out grommets. Just apply gentle pulling to the panel close to where it is still binding to the door, and these will pop out one by one. They sound like they are breaking (and on some cars they break easily), but none of mine did. There are no screws under window/lock controls, so don't bugger things up by trying to pry that open

Posted on Sep 28, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Click on the following link for step by step instructions on window regulator R&R
http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f802e6c9c
If you need further assistance, just post a comment.

Posted on Sep 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Windows stopped working all of a sudden. first rear passenger side then the rest. how can I fix this?


Check fuses and wire harness to door for correct connection. Check on the fuse box cover as it will show a relay that can also be faulty.

Jul 16, 2014 | 2002 Ford Explorer

1 Answer

The rear hatch and window do not open all the time. it will stay like that for days then opens up.


Your window regulator may be bad, or the motor on the regulator may be shot. If it's only one window doing it that's the most likely cause. There's also a chance one of the motor wires in the door boot has snapped because of opening and closing the door over time

Oct 05, 2010 | 2002 Ford Escape

2 Answers

Where is the fuel shut off reset on a 2002 ford escape


It's located in the spare tire compartment in the rear of the vechicle on the passenger side under the foam liner.

May 28, 2010 | 2002 Ford Escape

1 Answer

Won't go up


That sounds like the power window regulator is broken, which is a pretty common occurrence. The window regulator will need to be replaced. Also check the door switches and motor.
if the switches and motor are good from swap testing. If all the wiring an connections are good, I would suspect the up relay to be the failure on this one. This will help. Thanks please keep updated.please please do rate the solution positively .thank you for using fixya

Mar 20, 2010 | 2002 Ford Escape

2 Answers

Whats firing order diagram of 2002 ford escape v6 engine


Ford V6's - rear bank of cylinders are 1 - 2 - 3. Front bank are 4 - 5 - 6 starting from passenger side (front) of engine.
Your firing order is
1 - 4 - 2 - 5 - 3 - 6

You're welcome.

Sep 29, 2009 | 2002 Ford Escape

1 Answer

Power window failure on 2002 Ford Escape


I have a 2001 Ford Escape. My driver window doesn't alway roll up when I push the button. As silly as it sounds, when the driver window won't come up, I roll down the front passenger window and then push the buttons for both front windows. The driver window comes up then. I've been doing this for about 6 mos. so eventually it will probably fail. But it is a short time fix.

Apr 07, 2009 | 2002 Ford Escape

2 Answers

Rear window regulator broke


The regulator is attatched to the glass using the rivets through plastic disks. You need to drill them out before the glass can be removed.Save the plastic parts for reassembly.Good Luck

Aug 25, 2008 | 2002 Ford Explorer

Not finding what you are looking for?
2002 Ford Escape Logo

Related Topics:

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...