Question about 1991 Chevrolet Lumina

1 Answer

1991 lumina speedometer quit working after i noticed a thunking noise in the drivetrain when slowing to a stop. replaced the dog bone type mounts and the driver side motor mount. still having same problems. any suggestions ?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

Sounds like you have a problem with your speed sensor which is located on the right side drive shaft.

Posted on Dec 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to replace motor mounts on 1991 buick century 3.3 v6

if you have the proper tools you will need to support the engine with a jack, undo the mount nuts and bolts remove them then remove the mount. you can use the jack to move the motor up or down depending on what needs to be done.

Apr 11, 2015 | 1991 Buick Century

1 Answer

Got a 1990Toyota celica gt 2.2.and it vibrates pretty bad.but when I turn on ac it stops. When I give it gas it vibrates again.that's standing park. Does the same when going down the road..I've...

Engine control rod/dog bone mount could be bad it is located next to timing belt cover looks like dog bone. Check by holding foot on brake with car in gear and watch if engine rises and falls=bad dog bone that is the only thing I can think of hope it helps

Aug 03, 2014 | Cars & Trucks

1 Answer

Replace motor mounts

which ones do you need the dog bone at the radiator or the one under the motor next to the harmonic balancer or the transmission one

Nov 12, 2012 | 1997 Chevrolet Lumina

2 Answers

Speedometer not working

Rerplace the speedometer cable as well as the speedometer,if it still does not work,chck the fuses!

Jan 25, 2012 | 1991 Chevrolet Lumina

2 Answers

How do i replace my spark plug wires in the rear of my 97 chevy lumina? do i have to take the engine mounts off and pull it back?

No, you don't have to remove the engine mounts and pull the engine back, and this is inadvisable. It can be a challenge to get to the plugs on the firewall side of the engine. Here are some suggestions.

1. You can try to reach the plugs blindly by feel. This can be frustrating and time consuming, but patience and persistence can pay off.
2. You can remove obstructing components such as the coil/ignition module assembly, alternator, vacuum hoses, etc. as applicable.

Feb 24, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

Need motor mounts for 2004 Chrysler Pacifica

I'm thinking it has 1 motor mount and 2 dog bones. The mounts usually cost around $30 each and the dog bones $20-25 depending on the material their made of. You can replace these yourself, one at a time. The engine has to be jacked up just enough to take the weight off when you remove the mount. After you have it remove, install you new one/ones and tighten. After removing jack, torque the bolts to spec. Same thing is done with the dog bones. It a type of Motor mount that prevents the engine from leaning weight. These are usually located, one front/top engine area and one on bottom engine area.

Jan 13, 2010 | 1995 Mercury Sable

1 Answer

Oil pan removal on 1993 Chevy Lumina Car. 3.1L. I already have the front motor mount and trans mount out of car as well as the timing chain cover front yolk. Oh and the two dog bone mounts also. Can't...

Took the car out into my back field and smoked it.It was getting to be such a head ache and I couldn't take it anymore so I lit it on fire and watched it burn to the ground.



Oct 08, 2009 | 1993 Chevrolet Lumina

2 Answers

How in the world do you replace the rear spark plugs? How do they do it at the dealership? No room for an extension?

You have to roll the engine forward. Undo both top motor mounts (dog bones) at the engine. Put the car in neutral. You should notice on the mount a bolt hole on the bottom in the center. Hook a pry bar in the mount bracket on the passenger side and pull the motor forward. Have some one slide the bolt back in the drivers side mount, thru the smaller hole in the mount, while you hold the engine forward. Now the engine will stay forward so you can get to the plugs.

Aug 14, 2009 | 1991 Chevrolet Lumina

1 Answer

Spark plug replacement

Now that you have the 2 "dog bone" engine mounts removed, you have to pull the engine forward to access the rear plugs. I use a ratcheting strap to do this.

Sep 01, 2008 | 1996 Chevrolet Lumina Mini

1 Answer

Toyota camry 1997

Your motor mounts are worn out. Replace the "dog-bone" looking mount at the passenger side of the engine, and then replace the hydraulic mount right between the engine and the radiator.

Aug 19, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
1991 Chevrolet Lumina Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides