Question about 1995 Chevrolet Lumina
The security system (VATS/PassKey) is having problems, it's typical on those cars/years. It's been a nightmare for us. You can find a great write-up here: http://newrockies.ca , it was the only thing that saved my 94 Park Avenue that has the same security system.
Posted on Dec 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a detailed write-up on how to bypass the entire VATS security system yourself.
http://newrockies.ca/vatsbypass This is what saved my car and my money (that I didn't have!).
Posted on Feb 02, 2010
SOURCE: security light flashes
from what i have read, it is design to cut the gas supply so no one can still your car. Mine car wouldn't crank at all with the light blinking. turn the key to the on position and wait 10 minutes. turn it off and try to crank it. it has worked every time on mine. I have also read to cut the LITTLE yellow wire that runs from ignition,but i don't feel comfortable cutting wires even though you can always reattch the wire.
Posted on May 25, 2009
The process for the passlock relearn is correct. If by chance the relearn does not work, you may have a fail component in the system. Go to this link for options to fix this yourself.
Posted on Aug 07, 2011
Hello! The vehicle is equipped with the GM Pass-Key System..Also called VATS system....It works so well that 1000's of owners can not start their cars..It can only be bypassed with a commercial kit sold on Amazon.com (example). First I need to know a little background...Is this a problem with the owner using a new key; Or key is fine and it just quit working? The key has a resistor in it...It has been called a "chip" for so long that the name stuck...See the photo below and tell me if this is what the keys look like...#1...Clean the chip with contact cleaner...#2 Spray contact cleaner into the key slot...There are two contacts inside the key slot...If this does not work then the Theft Module is defective...At the PCM C-2 Pin# 44 is a Yellow wire...Cut the wire (leave enough slack to re-connect if needed) and Alligator clip it to ground...NOT THE END GOING INTO THE PCM but the cut end looking away from the PCM...See if the car will start...Send a comment...Guru...Saailer
Posted on Oct 01, 2011
Tips for a great answer:
Dec 26, 2015 | Cars & Trucks
Jun 22, 2013 | Cars & Trucks
Nov 08, 2012 | 2001 Pontiac Grand Am
Oct 01, 2012 | Cars & Trucks
May 07, 2012 | 1995 Buick Riviera
Feb 20, 2012 | 1992 Buick Park Avenue
Feb 04, 2012 | Cars & Trucks
Sep 21, 2011 | 1998 Oldsmobile Intrigue
Aug 07, 2011 | 2004 Pontiac Grand Am
May 11, 2011 | 1995 Oldsmobile Cutlass Supreme
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: