Question about 1992 Buick LeSabre

1 Answer

I need replacement glass for driverside headlight, is it available and how tough to install.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 5,763 Answers

You will have to replace headlight asm, you cant just buy the lens, you can look on the web, there not costly there a dime a dozen, just google your year make and model car with headlight asm and a ton of sites will pop up.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Change headlight bulb or whole unit on 2002 tundra?


The bulb is replaced not the whole headlight.

Apr 26, 2011 | 2002 Toyota Tundra

1 Answer

Driverside window glass comes out of track when the window is rolled down bout 3/4 of the way


one of the brakets on the bottem of the glass needs replace and window tracks need to be relubricated.

Mar 30, 2011 | 1993 Jeep Grand Cherokee

1 Answer

How do I remove halogen low beam head light to replace it?


Removal & Installation To Remove:
WARNING
The halogen fog light bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope.
NOTE: The headlight bulb should not be removed from the headlight assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlight bulb performance. Contaminants may enter the headlight assembly where they can settle on the lens and reflector. Never turn on the headlights with the bulb removed.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section. NOTE: Make sure that the headlight switch and the ignition switch are in the OFF position.
  2. Remove the pin-type retainers, screws and the air deflector from the radiator.
  3. Remove the three bolts and the headlight assembly.
  4. Disconnect the electrical connector.
  5. Remove the cover from the rear of the headlight assembly.
  6. If equipped with HID, release the spring tabs to remove the low beam bulb, otherwise disconnect the electrical connector and remove the bulb.
  7. Disconnect the electrical connector and remove the high beam bulb.
HID low beam headlight bulb lin_tc_0085.gif

Standard low beam headlight bulb lin_tc_0086.gif

High beam headlight bulb lin_tc_0087.gif

To Install:
  1. Place the headlight assembly in the proper position.
  2. Install the cover from the rear of the headlight assembly.
  3. Connect the electrical connector.
  4. Install the three bolts and the headlight assembly.
  5. Install the radiator air deflector.
prev.gif next.gif

Dec 18, 2010 | 2003 Lincoln Town Car

1 Answer

Need to replace headlight lens on a 1996 dodge avenger


Usually, one has to get the entire headlight assembly to replace the lens.
Is it cracked?
If it is just faded, try some anti-haze polish for headlights. This can save you some money compared to restoring the headlamp by replacing the assembly (which may be available from a salvage yard).

---
REMOVAL & INSTALLATION

CAUTION
Halogen bulbs contain gas which is under
pressure. Handling the bulbs incorrectly could cause it to shatter into flying
glass fragments. Do NOT leave the light switch ON. Always allow the bulb to cool
before removal. Handle the bulb only by the base; avoid touching the glass
itself. Whenever handling a halogen bulb, ALWAYS follow these precautions:

  • Turn the headlight switch OFF and allow the bulb to cool before
    changing it. Leave the switch OFF until the change is complete.
  • ALWAYS wear eye protection when changing a halogen bulb.
  • Handle the bulb only by its base. Avoid touching the glass.
  • DO NOT drop or scratch the bulb.
  • Keep dirt and moisture away from the bulb.
  • Place the used bulb in the new bulb's package and dispose of it properly.


Cirrus, Stratus, Sebring Convertible and Breeze


  1. Open the vehicle's hood and secure it in an upright position.
  2. Disconnect the negative battery cable.
  3. Remove the 2 screws securing the headlight module to the radiator closure
    panel.
  4. Pull out the headlight module from the vehicle.





    Fig. 1: Using a Torxhead screwdriver, remove the 2 headlight
    module retaining screws
    90906p69.jpg






    Fig. 2: Pull the headlight module straight out of the front of
    the vehicle to remove the bulbs
    90906p70.jpg






    Fig. 3: Disconnect the wiring harness for the headlight bulb
    90906p74.jpg






    Fig. 4: Turn the light bulb retaining ring counterclockwise,
    and remove it from the back of the module
    90906p75.jpg






    Fig. 5: Pull the light bulb out from behind the module. Never
    touch the glass of the light bulb
    90906p76.jpg



  5. Detach the headlight electrical connector.
  6. Remove the retaining ring holding the bulb to the back of the headlight
    module.
  7. Pull the bulb from the back of the headlight module. Hold the bulb by its
    base only; try not to touch the glass itself.
    To install:

  8. Holding the bulb by the base, place it in the headlight module, then secure
    with the retaining ring.
  9. Attach the electrical connector to the bulb.
  10. Install the headlight module into the vehicle and tighten the 2 retaining
    screws.
  11. Connect the negative battery cable and check the headlight operation.


Sebring Coupe and Avenger


  1. Open the vehicle's hood and secure it in an upright position.
  2. Disconnect the negative battery cable.
  3. Remove the sealing cover by rotating it counterclockwise.
  4. Remove the bulb attaching spring and pull out the light bulb.





    Fig. 6: Remove the headlight sealing cover(s)
    90906g28.gif






    Fig. 7: Remove the attaching spring and pull out the bulb
    90906g29.gif

    To install:

  5. Install the bulb into the headlight module.
  6. Install the bulb attaching spring.
  7. Install the sealing cover.
  8. Connect the negative battery cable and check the headlight operation.


prev.gif next.gif

Oct 07, 2010 | 1996 Dodge Avenger

2 Answers

Changing the headlight bulb in 2003 dodge grand caravan


1) open the hood.
2) Carefully remove the three screws holding the headlight assembly in place.
3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. (Do not touchglass with your fingers or it will cause the bulbs to catastrophically fail - clean with alcohol pad if you touch the glass)
4) Carefully insert the headlight assembly back into place.
5) Replace the three screws removed in step 2 being careful not to over tighten.

Oct 30, 2009 | 2003 Dodge Grand Caravan AWD

1 Answer

Driver light out how to replace bulb need special tools?


Headlight Bulb Removal & Installation To Remove:
  1. Disconnect and isolate the negative battery cable.
  2. Remove the headlight assembly mounting screws.
  3. Pull the assembly forward and disconnect the bulb connector.
  4. Turn the bulb retainer ring counterclockwise and remove the bulb from the headlight assembly.
To Install:
NOTE: Do not handle the glass portion of the bulb with your bare fingers.
  1. Install the bulb in the headlight assembly.
  2. Install the retainer ring.
  3. Connect the connector to the bulb.
  4. Install the headlight assembly in the vehicle.
  5. Connect the negative battery cable.
No special tools required.

Jun 24, 2009 | 2004 Dodge Caravan

2 Answers

My hi and low beam headlights were broken in a small damage accident-1991 olds delta 88 royale-my local supply store tells me a replacement is not available? can any advise thank you bill


hi bill, I think the problem might be the glass cover for the headlights. I checked, and the 87-91 olds delta 88 have a replacement bulb, not a sealed beam headlight. I assume the glass cover (lens) of the headlights were broken due to the minor accident. The headlight lens, or glass, might be found in an auto salvage yard. You might find new ones at a dealership, but they would be very hard to find for a 91, as they don't make them anymore, due to the cars age (no demand to make manufacturing them worthwhile). So check the junk yard, it's your best bet. Good luck, Curt

Mar 09, 2009 | 1991 Oldsmobile 88

2 Answers

Need to replace headlight bulb in honda civic 2003


How To Install Replace Headlight and Bulb Honda Civic Sedan 01-03 1AAuto.com


Dec 31, 2008 | 2003 Honda Civic

1 Answer

Driverside headlight out.


Ok a little complex. You have to open the hood. Look near the battery on the headlight assembly tou'll see a clip and a lever. You have to depress the clip and move the lever completely down. Lots of times seized. Use as much lube to release the slider. Once you get it low enough I use a suction cup on the headlamp and pull it out while moving the lever down. Once they line up inside you can pull out the assembly to change the bulb. Sometimes we have to replace the slider guide in the head lamp retainer when they break. Sometimes not an easy fix.

Nov 05, 2008 | 1999 Volkswagen Beetle

1 Answer

How do you replace the driverside low/high beam?


remove the front bumper if you mean the whole unit if you mean the bulb its just as easy to remove the headlight

Oct 17, 2008 | 2004 Volkswagen R32

Not finding what you are looking for?
1992 Buick LeSabre Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...