Question about Volkswagen GT

1 Answer

Vw polo 02. Engine management light is continously on when nothing was wrong with car. Now for the 4th time in 7 months the 'egr' valve has been changed. It has gone again and my car sounds like a tractor.no one seems to know what the problem is.

Posted by on

  • geoff hunter Sep 28, 2010

    when you say it sounds like a tractor WHAT DO YOU MEAN exhaust noise??

  • lorraine_759 Sep 28, 2010

    Yes except it's not a problem with the exhaust.that's fine

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Lorraine,please explain in more detail..ta,iM old and need info fed SLOWLY.
geoff.

Posted on Sep 28, 2010

  • lorraine_759 Sep 28, 2010

    Basically the enging light is always on in my car. I changed coils valves you name it I did it.more recently I have been told it's the 'egr' valve or something. I had this part changed a number of tins each time a genuine vw part. I have spent a fortune. Last two times this part when there was a 'poof' noise and next thing the car sounded like a tractor but the exhaust is fine.

  • geoff hunter Sep 28, 2010

    are you losing power? using excess gas?troubled by excess noise?then SAVE MONEY.LEAVE IT ALONE.......

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 2005 model 1.4 polo TDI, and sometimes when i'm driving it would cut power but still drives not with the initial power it had before, what could be the problem?


You need to have a Diagnostic test done by plugging in a fault code reader to determine the cause of the fault. The car will be going into limp home mode ie engine management light on it reduces engine performance. if you have a yellow spanner symbol then the likely cause is due to one of the engine electrical components such as the egr valve solenoid or maff (air flow meter)

Oct 18, 2016 | 2005 Volkswagen Polo 1.4

1 Answer

VW Polo 1.2 (02 Reg) - Where do i connect hose that is attached to battery casing


It is a drain for gasses from the battery and should just hang freely or clipped to something solid.

Jul 12, 2017 | Volkswagen Polo Cars & Trucks

2 Answers

Crankshaft sensor for vw polo where is the


Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing

Sep 12, 2010 | 2002 Volkswagen Passat

1 Answer

02 VW Polo 1.2 steering wheel warning lights on


Red this article:

Eventhough the level is right, the fluid might need replacing (every 3~5 years and 50.000-100.000 miles).

You can read how to recognize bad/old fluid here: http://www.hondaclub.com/forum/articles/1492-power-steering-fluid-lifeline-your-steering-system.html

Aug 25, 2009 | 2002 Volkswagen Golf

1 Answer

Engine mgt lights comes on/off after new spark plug installed.


check your multi plug connections where you removed things to gain access to teh plugs first

Aug 22, 2009 | Volkswagen Golf Cars & Trucks

1 Answer

Orange light 03 vw polo


u have engine management problem it will need to go on a computer to fix it

Jul 12, 2009 | 2003 Volkswagen Golf

3 Answers

Vw polo Broken timming Belt


Hello be sure that the new belt was instaled right and all the marks aligned perfect Isvery easy to miss the timing marks , if thebelt and timing marks are ok ,Is very comon in v w to bend valves when the belt get broken,now the only way to know is by removing the cilinder head ....good luck.......,

Nov 14, 2008 | 1998 Volkswagen Passat

8 Answers

VW POLO-52 plate EPC light on dash


My Polo had a similar problem and the brake light switch at the brake pedal was replaced. Then the computer was reset and the EPC light issue was resolved. It has something to do with the engine management, when sensing the light switsh being activated, retarding the power of the engine.

Oct 28, 2008 | 2001 Volkswagen Golf

6 Answers

VW Polo Classic 1.6 Radiator fan not going on


Try moving the fan blades by hand to see if the fan spins freely to see if the problem is frozen bearings in the fan motor. Replace the fan motor if it doesn't turn. If it spins freely disconnect the wires and hook the fan directly to the battery using a jumper. If it runs the problem is most likely the thermostatic switch. If it doesn't the fan motor is bad.

Jul 03, 2008 | 2002 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...