Question about 2001 Oldsmobile Intrigue

2 Answers

I have a 2000 Olds intrigue, and am getting error codes P0410 and P0327. What are they telling me and how should I repair them?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 473 Answers

Issue with your Vaccum PCS, Check/ Relay, PCS Valves Crack and Dry Rubber Joint Check Thermostat Resistance, Relay Utility
Refer to Book Repair Manual or back cover for reference.

Posted on Sep 28, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

P0410 is a code for the EGR Valve. This can be checked by pulling vacuum on the hose attached to it while the engine is running. If the engine struggles when you do, it is working fine. P0327 is a fault on the Knock sensor. More precisely, a low voltage on the Knock Sensor. This is more than likely a severed wire or faulty sensor. I would recommend taking care of the EGR code and see if that cures both issues.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Po410 code /failed emmision test


the following link explains the 410 code and possible solution ---check the air pump unit wiring and fuses for disconnect or damage as to the technical service bulletin (tbs) it is for the small suv /pick up
http://www.obd-codes.com/p0410

May 21, 2016 | 2000 Oldsmobile Intrigue

1 Answer

BCM LOCATION 2000 OLDS INTRIGUE


It is located under the dash left side above the parking brake ! There are four wiring connectors to it !

Mar 17, 2014 | 2000 Oldsmobile Intrigue

1 Answer

2000 Olds Intrigue 3.5L w/ A.I.R. trouble code P0410 "Secondary Air Injection System malfunction" Anyone have instructions I can download for troubleshooting or tips?


There are two solenoids for this system. One is located near the firewall on the passenger side, the other on the driver's side near the radiator. There is a small vacuum line going to each one. Remove this line and connect up another piece of vacuum line and see if you can **** air to pull a vacuum. These parts go bad often. You should not be able to get any air when sucking on the line. BTW, these parts are about $200.00/ea. Most people just live with the codes because it really only effects emmisions when the engine is cold and it first starts.

If these are good, there is a blower motor located in front of the driver's side front tire. Removing the plastic wheel well liner gets good visibility to it. Make sue the motor/fuse/etc is working. (Although I never hear mine run and I don't have any codes.)

Nov 17, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Check Engine ight


Hello there:
Here is the code
P0410 Secondary Air Injection System Malfunction
It is another air pump that pushes air into the exhaust so the cats can burn more pollution.. It does not affect drive train, just emmisions it shouldnt cost about $400 if it is the air pump, Unless there is a secondary problem, ok?
Hope this helps you out
Best regards Michael

May 30, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Had the engine control codes retrieved because engine light was on. code was p0410. i was told i would need a secondary air pump system but only the dealers had this particular part and they would be the...


Expensive. Depending on whether it's just the air pump (usually) or solenoid valves, couple to several hundred bucks. Others can fix this, but need salvage or ebay parts.

Apr 06, 2010 | 2001 Oldsmobile Intrigue

3 Answers

Is it a timing belt on olds intrigue 2000, 3,5L?


this engine uses a timing chain, chains require no replacement unless the engine is being repaired or the chain or spockets fail

Mar 26, 2010 | 2000 Oldsmobile Intrigue

1 Answer

2000 olds intrigue check engine light stays on after start also the security light comes on when starting


When the check engine light stays on it means you have a hard code,your computer wants you to get it read so you can perform the necessary repairs.This is very Important!

Jul 28, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Where is my smog pump located in my 2002 Oldsmobile Intrigue? I am getting a p0410 error.


Smog related "error" may be covered under manufacturer warranty...it's a Federal Law 10yrs. on emissions equipment...However, they may still charge the labor to do the repair look for $129-150
Good Luck

Jun 15, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Radio code


you normally have to get codes from the dealership

Apr 12, 2009 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2001 Oldsmobile Intrigue Logo

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...