Question about 2003 Mercury Grand Marquis

1 Answer

Power window doesn't work on driver's door - 2003 Mercury Grand Marquis

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercury Master
  • 75,066 Answers

The most common cause of this is the window motor inside the door is defective, pull the door panel and replace the lift motor in the bottom of the door, you will need to drill out the three dimples in the sheet metal over the motor to access the bolts that hold the motor to the window regulator

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The driver window doesn't slide down slightly when I open the door and close it ! Now the window bangs on the door frame when I close the door!


have you tried resetting the windows by powering them all the way down and keeping switched pressed the same all the way up. or could be microswitch in door latch

Mar 16, 2013 | 2005 Aston Martin DB9

1 Answer

2000 gmc jimmy drivers window doesn't work but all others work


With key on door open, hold switch in down position and rap door panel with rubber mallet...if it works, need motor, if not, check switch for power out to motor

Mar 01, 2013 | 2000 GMC Jimmy

1 Answer

My power windows only work from the driver side


the driver side door usually holds the master switch panel. which has the window lock button/switch. if the button doesn't activate/deactive, the whole switch panel has to be change out.

Aug 02, 2012 | Dodge Dakota Cars & Trucks

2 Answers

The passenger side brake light, and passenger side (front and back) window control doesn't work is it a fuse?


Well, the short answer is no.
The lights and windows are are different fuses.
There's a slight chance you have a problem with a ground wire on that side, but I doubt the two problems are related.
I would check the light for power and ground, and look at the window switches for power and ground. The windows are powered thru the driver switch on most cars.

Jul 17, 2012 | 2004 Oldsmobile Alero

1 Answer

Power window on drivers side doesn't work


I looked at the wiring and I think the easiest for you would be to take off the door panel and run a jumper wire from the battery to the motor if it runs replace switch if it doesn't replace motor. Sho

0996b43f8022e3b8.gif p around for parts

Dec 06, 2011 | 2004 Chrysler Sebring

1 Answer

"automatic" window on my 2005 mustang does not


So when it doesn't seal that means the tracks the window have been falling out typically. The door panel needs to come off to inspect the tracks. And if your driver side power window doesn't work, that typically means a seperate problem located in the switch itself. It could also be the wires, so you can run a seperate wire to test the switch by running it directly to the window motor, and pressing the switch down. This can easily be done while the door panel is off so you can hit two problems at the same time.

Oct 20, 2011 | 2005 Ford Mustang

1 Answer

Own a 1996 Dodge Caravan. Power window doesn't work on drivers side, nor for the rear side windows. Replaced the power window switch and this did not solve the problem. The only window that works is...


nitescot, What you can try is to open up the rubber boot running from the body of the vehicle to the door. The constant opening and closing of the door will sometimes cause the wires inside the boot to break. This is a common problem when it comes to power windows. Open the boot with a knife being careful not to damage the wires inside. Look for any broken wires. Repair as necessary. Good luck with this.

Aug 09, 2011 | 1996 Dodge Caravan

1 Answer

Every doors power windows will not work, I am thinking its a fuse or a relay because I do not understand how every door just stopped working. My wipers still work though as I read in a post how the fuse is...


The power windows do not use a fuse rather its hooked to a automatic reset circuit breaker, this is so it would reset after a fault, the first place to look which is the most common reason for all windows to stop working at once, open the driver door and look in the center of the door in the location of the hinges, you will see a rubber type boot that contains the wiring for the drivers door controls. you will need to slide boot back and check each wire, you will find a broken wire or two. this happens from opening and closing of the door and is common. good day.

May 27, 2011 | 2002 Mercury Sable

2 Answers

Pontiac Grand Prix 98


ur power box is warped.on the drivers door. same thing happened to my Grand Prix

Sep 17, 2008 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
2003 Mercury Grand Marquis Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...