Question about 2003 Honda CR-V

1 Answer

Rev high when changing gear up

I have just brought a 2003 CR-V ITEC SE and have noticed that when changing up through the gears with the clutch down high rev are noticed, they drop after two - three seconds to about 1000 revs The rev are staying about 2000 - 2500 but when changing down the gears the revs are about 750 to 1000. I have tested the clutch with the hand brake on and the engine stalls in every gear, is this normal for the high revs.

Posted by on

  • 2 more comments 
  • Ben Doyle
    Ben Doyle Jan 14, 2009

    I have the exact same pronlem on my 2004 CR-V SE Sport, this is not normal and i an sourcing an investigation to the problem.

  • Anonymous Mar 15, 2014

    My car will rev to 3500 revs but when I put my foot on brake the revs drop back to 1000 and the butterfly don't open when I press throttle just revs

  • Anonymous Mar 18, 2014

    2003 Gmc Denali having problems grabbing gears you have to rev high to get gears

  • Anonymous Mar 21, 2014

    high revs between gear change manual gearbox

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 359 Answers

My friend has same model its normal he said it does it more so when its cold

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Revs high when i change gear


Is it possible the clutch pedal is interfering with the throttle? Start the engine in neutral and allow it to idle. Press only the clutch pedal down and see if this increase the engine speed. If it does speed up the engine and slows back down when you release the clutch then somehow this operation is where your fault lies. If it doesn't alter the idle speed, then rev your engine and release the throttle to see if it returns to idle immediately. If it is slow to return to idle then your throttle cable could be sticking. This means when you change gear lifting off the throttle has little effect and depressing the clutch to change gear causes the engine to race as the throttle is still partially open.

Aug 23, 2014 | 2005 Ford Fiesta 1.3

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

Honda crv wont engage gears. engine just revs as if in neutral


sounds like a failed clutch or broken transmission

Mar 24, 2014 | 2001 Honda CR-V

1 Answer

2009 ford mustang v6, standard, will not accelerate, no matter in which gear I am in why?


Sorry old son but your clutch sounds like it has gone to the big junk yard in the sky reserved for dead clutches . When a clutch starts to slip it will continue to do so until that is all it will do . solution a new clutch is required .

Nov 19, 2013 | Cars & Trucks

1 Answer

I have a 2003 mazda rx8 its a manuel anyway il be driving in 5th gear and il put my foot down and the rev needle will shoot up and then drop back down while my speed


Yes it is the clutch slipping, in high gear the greatest load is put on the clutch so that is when they slip the most.

Mar 16, 2012 | 2004 Mazda RX-8

1 Answer

I drive a 2003 VW GTI. Theres a high rev sound after 3rd gear. Sounds like the engine is high reving and gets louder when the car gets faster even when shifting into a higher gear.


It needs rebuilding. The upper gear(s) are not locking in, so your likely wearing out your clutch when you drive fast. Get it rebuilt.

Sep 01, 2010 | 2003 Volkswagen GTI

1 Answer

CRV rev building problem.


is it fly by wire throttle control ?? or a conventional cable

Nov 21, 2009 | 2003 Honda CR-V

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

2 Answers

High revs when changing up through the gears


it is just one of those cars that drive like that its different but you need to change your driving style to suit

May 24, 2008 | 2003 Honda CR-V

Not finding what you are looking for?
2003 Honda CR-V Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...