Question about 1994 Chevrolet S-10

2 Answers

My blinkers will not operate properly. The flasher works sometimes but after about a week stops blinking and later will return to functioning for a period of time and then stop again.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Have you replaced the flasher itself? If not replace it, they're cheap. If this doesn't help, check all of the light bulbs. One bad bulb can cause a multitude of trouble. If all of this continues to not help, try changing the turn signal switch in the steering column

Posted on Sep 28, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Sounds like a bad flasher or bad electrical connection. Hope this can help you.
D.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal failure


The bulbs all have to be good for the flasher to work. The flasher is under the dash, driver side. When you turn on a blinker, do you hear it clicking under the dash. If the turn light is on , on the dash , but not flashing, then a bulb is probably bad on that side. Leave the blinker on and walk around the vehicle to check the lights. Flip the blinker to the other side and walk around the vehicle again checking lights. If all the lights are lit, but not blinking, then the flasher is most likely bad.

Dec 05, 2013 | 2000 Chevrolet Venture

1 Answer

My low beam works on both sides but not the high beam on the drivers side. also my blinkers dont turn on or blink but, if you use your hazards they turn on and blink on my 2001 dodge dakota v8


Headlamp operation is controlled by the central timer module. If 10A fuse 11 in the junction box is OK, the module could be defective.

Turn signal operation is determined by the position of the multi-function switch in conjunction with the combination flasher. If 10A fuse 19 in the junction block is OK, the flasher could be defective

Dec 09, 2012 | 2001 Dodge Dakota

2 Answers

2003 ford explorer - sometimes the turn signals work correctly. Other times they may flash 3-4 times then stop; however, turn signal switch is still engaged. When they stop working hazard flasher are...


This is most likely going to be an issue with a relay. The relay on the fords that is tied into the blinker module can go bad is it gets wet or over loaded. Are there any after market things added to your vehichle? This can also be caused by overloading part of your ECU if you have after market headlights, or headlights that carry too high a load. When it blinks for 3-4 times and stops, does it blink faster than normal? This can be a sign of a false connection to the light itself. Such as having the wrong bulb in for the blinker.

May 05, 2011 | 2000 Ford Explorer

1 Answer

Blinker sometimes doesnt work and makes strange sound


Sounds like a problem with the turn signal switch.

Aug 18, 2009 | 2006 Ford F-150

1 Answer

TURN SIGNAL, BRAKE & HAZARD LIGHTS


No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:
  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Jul 09, 2009 | 1999 GMC Denali

1 Answer

"97 T-Bird...blinkers stop & start


it sounds like you need to replace the flasher unit under the drivers side dash

May 08, 2009 | 1997 Ford Thunderbird LX

1 Answer

1998 Ford Explorer blinker problems


you need to go back over all the bulbs. Take each one out and put it back in making sure its working properly. Most likely a bulb is not grounding. I had this on a f-150 that took two days to track down. Good luck

Mar 18, 2009 | 1998 Ford Explorer

1 Answer

2004 wrangler blinker problem


What other problem did you have before the signals quit? Something that stopped all functions from the signals has to be either a feed or ground IF the flasher is good. Signals feed. Hot wire from the flasher 1 and it should blink underload, but not with a test light or DVM. In other words using a test light the flasher wire should be powered steady. All the rest of the switch is switchable. You should also get a hot wire when the brake pedal is pushed. Check for power at the brake switch,key off.

May 14, 2008 | 2005 AMC Wrangler

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...