Question about Ford Escort

2 Answers

I have ford escort zx2 2 liter dual overhead cam with broken water pump housing. what is labor in finding and repairing this part?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

You can replace it yourself by following the instruction below:
The ZX2 is equipped with a 2.0LDOHC V-Tech engine. The water pump is on the front (rt side of car) of the engine block, visible with the hood up. NAPA autoparts replacement instructions are to loosen the belt drive pulley from the pump BEFORE removing the serpentine belt. Once the four bolts are loose, take the belt off (good time to replace?) remove bolts and old water pump (four more bolts)- it will be tight, but it comes out- cleangasket area and install new gasket and pump in reverse order. That includes putting the pulley on and hand tightening the bolts, put on the belt, finish tightening the bolts to the pulley.

You can find the part by contacting Automotix on 1-866-262-5531

Posted on Sep 28, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! It may cost you atleast $675 for the parts, labor and machine shop. HOpe this shed some light.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt diagram for 2000 ford escort


  • There are three possibilities for a 2000 Ford Escort.

  • If you have AC line then this is your diagram


11_4_2011_12_36_58_am.jpg
  • No AC then the diagram below is for you.

11_4_2011_12_38_12_am.jpg
  • If you have a DOHC (Dual Overhead Cam) then the diagram below is yours.


11_4_2011_12_39_36_am.jpg




  • Hope this helps.

Nov 04, 2011 | 2000 Ford Escort

1 Answer

How do I find out what size engine is in my 2001 Ford Taurus? I'm trying to get a new transmission for it and I'm not sure which is the best one because I don't know all the specifics.


Look at the 8th digit of the vehicle identification number.

If it is a U it is a 3.0 liter overhead valve.

If it is an S it is a 3.0 dual overhead cam.

Nov 16, 2010 | 2001 Ford Taurus

1 Answer

How do i set the timing for a 2001 ford escort zx2 with dual overhead cams? i just replaced the timing belt tensioner bolt.


i do not know but give these websites a try www.alldatadiy.com and www.autozone.com if all fails top by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Oct 16, 2010 | 2001 Ford Escort ZX2

1 Answer

How to replace timing belt and tensioner on 95 1.9 ford escort


Best idea is to get a repair book from an autoparts store. But it's going to involve removing the spark plug from the number 1 cylinder and bringing the engine to top dead center before starting anything else. Is it Dual overhead cam? those can be tricky... I've seen one be completely inline and still bent every valve on startup. It's a sucky job.

Mar 22, 2010 | 1995 Ford Escort

1 Answer

Where can i find the timing marks on 1998 ford escort zx2 ?


Hello pamgolmon: My name is Roger and i will answer your question. The 2-0 dual cam engine is a interference engine. This means if the engine jumps time at the timing belt. It will bend the valves. As for the timing marks on the camshafts. Their are no marks to be located. To set the timing marks on this engine requires special tools. This makes it expensive for not only the do it yourself mechanic but also the repair shops also. If the valves were bent you must pull the head for the repairs also.
I know this is not the answer you were hoping for but it is the only answer to give. Please rate the quality of the answer as this way we know your answer was correct. Please just ask if you need further help. Thank You for using Fix Ya. Roger

Sep 09, 2009 | 1998 Ford Escort

1 Answer

Changing Spark Plugs


2.0L SOHC (single overhead cam) AGSF34EE plugs gap 0.054
2.0L DOHC (dual overhead cam) AZFS32FE plugs gap 0.050

The plug numbers are the motordraft numbers

Apr 02, 2009 | 2001 Ford Focus

2 Answers

Require a diagram of timing belt 1989 ford escort


0900c1528008b33e.jpgFig. 9: Close-up view of the timing belt in place-diesel engines You can find this and other articles at autozone.com then repair info, then vehicle repair guides. hope this helps.

Feb 27, 2009 | 1999 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...