Question about 1997 Pontiac Trans Sport

1 Answer

Missfire cilynder 1 - 1997 Pontiac Trans Sport

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 5,332 Answers

The number one cylinder is on the backside of the engine. You'll can check for spark and the condition of the spark plug. If there is no spark check the coil and the plug wire. If the plug is worn out replace it. If everything looks fine than an injector balance will need to be done to see if the injector is working.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix the the p1300 p1310 codes to a Toyota Camry 2001le4cl


Ok for code p1300 replace ignition coil 1 and 4 cilynder and for p1310 replace ignition coil 2 and 3 cilynder

Mar 03, 2015 | Toyota Cars & Trucks

1 Answer

What is bank system to lean


BANK MEANS CILYNDER HEAD 6 OR 8 SILYNDER ENGINES HAVE TWO BANKS BANK 1 AND 2 OR 'A' AND 'B' 4 CILYNDER ENGINES HAVE ONLY ONE LEAN OR RICH MITURE IS CONTROLED BY OXIGEN SENSORS SO YOU MIGHT HAVE AN O2 SENSOR PROBLEM AND YOU HAVE TO OLLSO SEE IF YOU HAVE ONE OR THO SENSORS PER BANK ALL DEPENDS ON YEAR MODEL AND SIZE OF ENGINE OLLSO YOU HAVE TO SCAN FOR CODES FOR MORE SPECIFIC ANCERS.

Jul 14, 2014 | 2001 Hyundai Santa Fe

1 Answer

Cilynder 5 missfire


move the HT lead / coil pack to a different cylinder to check for electrical fault. Move injector to a different cylinder to check for injector fault .Replace which ever shows as faulty when the misfire moves accordingly.

Dec 16, 2013 | 2003 Pontiac Montana

1 Answer

Code po202


If you had code 301 missfire for cylinder #1 and you changed #1 to #2 and the error codes moved to #2 then take about 3 seconds and say what did I do last. Then Change the #2 injector if it is still in the #2 hole.

Sep 03, 2013 | Jeep Cars & Trucks

1 Answer

1997 Chrysler Concordeidling issue. Running rough, shaking, seems like it's misfiring. Idling very rough when stopped in gear and shakes really hard then too. It's a little less rough when the air...


sounds like u need 2 go over the whole ingnition system. unless u can isolate missfire down to one cilynder u may need 2 change rotor arm dizzy cap leads & plugs but maybe first start with a compression test 2 make sure rings&valves are ok and its not a low compression miss.sometimes it can be cheaper 2 have mechanic put car on a tune scope good luck

Sep 12, 2011 | Chrysler Concorde Cars & Trucks

1 Answer

Cloudy white smoke out of the tailpipe and smokes even more when I stop at a light or slow down


White smoke out of the tail pipe especially on '''warm''' weather usually means antifreeze/coolant leaking in to the cilynders. you may have a blown head gasket(cheapest to replace) and or a crack/warped cilynder head or crack block(not cheap) if the smoke its happening in '''Cold''' weather it could simply be condensation which is normal.

To find out exactly ,in a v6 engine ,simply take out the 2 middle spark plug (1 of each side) and crank the engine. If you see white smoke come out of either one thats where your leak is and you would go from there.

Note:

Just crank the engine '''Do NOT''' let the engine run for long without sparkplugs or catalyc converter damage may occur.in a 4 cilynder engine take out any center spark plug and see where the leak is

Aug 26, 2010 | Lexus ES 300 Cars & Trucks

2 Answers

Check engine light flashing runs rough not firing on all cylinder2000 lincoln navigator with large triton engine Hooked up diagnnostic and it said 1. system too lean bank #2 2. Unable to bleed up fuel tank...


you may try your rotor button and distributor cap. and spark plug wires. try your map sensor also they tend to cause a lot of misfiring if they go bad.hope this helps.

Apr 20, 2010 | Lincoln Navigator Cars & Trucks

2 Answers

I need to know where the number 5 piston is


ford starts with #1 is pass front #2 is 2nd pass from front #3 is 3rd pass front # 4 is forth from pass front now i dont know if it is a v8 or v10 if it is a V8 THEN # 5 IS THE FRONT DRIVERS SIDE IF IT IS A V10 THEN #5 IS THE REAR PASSENGER SIDE

Dec 27, 2009 | 2005 Ford Expedition

1 Answer

1998 honda civic cel code 71-74


code 71 means #1 cylinder missfire 72 Means #2 cylinder missfire 73 means #3 cylinder missfire and 74 means #4 cylinder Missfire

May 29, 2009 | 1998 Honda Civic

Not finding what you are looking for?
1997 Pontiac Trans Sport Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...