Question about 2008 Hyundai Accent

1 Answer

I HAVE ACCENT 2008 MY ENGINE DOES NOT WORKING AFTER WASHING BY WATER WE CHECK THE COMPERSSION IN THE FOUR CYLINDER WAS 80% AND THERE IS CUREENT IN THE FOUR SPARK PLUGS AND THERE IS CURRENT AT THE FOUR INJECTORS BUT THE CHECK ENGINE LAMP DOES NOT PUT ON AND WE CHECKED THE ECU WE FOUND IT CLEAN(THE WATER DOES NOT REACH IT) SO WHERE IS THE FAULT PLEASE CAN YOU HELP ME AND SOLVE MY PROBLEM AND HOW CAN I TEST THE ECU THANK YOU ENG SHENOUDA

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 3,180 Answers

When washing an engine you have to be careful any seal on the electrics can be weak and water can get in this will disrupt the signals the ecu uses. you will need to remove one by one every sensor cap were the wiring goes in and check there is no water in them, even the ecu connection, any water found dry out and replace the seal as its weak, you have to be careful when washing engines they don't get that wet in normal running, i usually steam clean the engine bay as this does not use excessive amounts of water and removes oil and grease better than water on it own.

Posted on Jul 03, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: Misfire on cylinder 1 and 3

Do you observe abnormal idle speed? It may be just an indicator fault; not a really engine firing problem.
Sign up free at link http://ww.hmaservice.com/
You will find a lot of technical information for your model.

Posted on May 20, 2008

cxbxr_3
  • 11 Answers

SOURCE: accent diesel will not rev above 2500 rpm, very

Have the turbo checked out.

Posted on Aug 12, 2009

  • 306 Answers

SOURCE: i washed engine and after a short run engine

Are the plugs in the center of the cylinder head? About 6 inches/ 10 Cm. Look carefully in the plug cylinder ports make sure there is no water next to plugs (this happened to me with a car once)
You can try a rag pushed down (hold a corner) with screwdriver or hairdryer. Otherwise they sell electrical drying spray at parts stores. Good luck!

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Firing order


Type into a search engine [Google, for example...] "firing order 2008 Hyundai Accent"....

Jan 16, 2014 | 2008 Hyundai Accent

1 Answer

Head


Usually, coolant in the cylinders means you have a blown head gasket and - or a cracked cyl head.

Jul 11, 2013 | 2008 Hyundai Accent

1 Answer

2008 hyundai accent automatic 117000 miles. check engine light came one and it started losing power to point it would not budge at all. fuel light was on too,. but even after putting gas in it, there was...


Sounds like a ECU problem. The main computer. Take it to a Hyundai dealership and have them check the computer. You don't say how many cylinders if the cylinders are next to each other could have engine or gasket damage

Jun 08, 2017 | 1997 Hyundai Accent

2 Answers

2008 hyundai accent clutch slipping, i think?


seems a bit early for clutch. how many k's? I would start by checking the intake tube for splits & security & airflow sensor. they will cause the engine to rev but no response (like a slipping clutch) so its manual right?

Oct 09, 2012 | 2008 Hyundai Accent

1 Answer

WHERE IS THE WATER PUMP ON PONTIAC G6


There are four types of engines that come with this car, the waterpumps are in with the timing chain or on the front housing where the belts are the four cylinder the pump is behind the front cover and is turned by the chain.

Oct 27, 2010 | 2008 Pontiac G6 Sedan

1 Answer

Why accent only 6 kmpl ?


Your engine is runing far too rich and will wear very quickly due to the washing of the cylinder walls. Check your air filter first. If only new, then have the injectors cleaned and serviced. Also get the airflow sensor checked out. There are other possiblities, but start off with these.

Mar 19, 2010 | 2001 Hyundai Accent

1 Answer

Hello i have a 2008 hyundai accent gls. it has


Get it scanned. You should be under warrantee. Otherwise most auto parts stores will do this. Could be as simple as a loose gas cap.

Oct 01, 2009 | 2008 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...