Question about 2007 Mercedes-Benz C230 Sedan

1 Answer

Dear, specialists. I have Merceded 230C produced in 2006 . I have just changed the engine oil. And have problems with reseting servis record to zero.Is it possible to reset simply using some wheel buttoms? How to manage it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

Switch on ignition wait some time till mileage appear on display then press and hold R button on you instrument cluster till make beep sound as soon as make beep sound release R button and read what display say you to do next ( will ask for confirm resting press R button again for 3 second) then say reset confirmed after that switch ignition and switch on and read new service.

Posted on Oct 12, 2010

  • Anura uk
    Anura uk Oct 13, 2010

    require add one more thing before pres and hold R button get service on to the display using multifunction switch on steering wheel then pres and hold the R button till make beep sound sorry about missing one step.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have to add oil between oil changes, I can't find any leaks and don't smell burnt oil. Also my truck only has 58,000 miles, where's the oil going?


How many miles are you doing per top up ml?

it is nt uncommon to have to top up by half a litre of oil or so between servies. Also the harder you drive the car the more oil it will burn as there is more crankcase wear and also more heat produced. If there is no leak its burning it im afraid, there is no other explanations

Nov 20, 2012 | 2006 Chevrolet Silverado

1 Answer

How to reset the oil change light for h3 hummer 2006


To reset the oil change,put the key on then press the gas pedal 3x with the car on,the start the engine,the oil change light will be reset

Oct 04, 2011 | 2006 Hummer H3

1 Answer

2006 chevy trail inline 6. Change engine oil light came on all of sudden. I changed the oil just 2000 miles ago. What does it mean? How do I reset ?


{: ) It could be that it was not reset properly and successfully when you last changed your oil. A scan tool can reset it better. Also, double check for oil level and leaks.

May 29, 2011 | 2006 Chevrolet Trailblazer

1 Answer

Reset the change oil light on 2006 mercury mountaineer


On the console, where the oil change light is on, scroll through the items until you get to oil life. Once at oil life, hold the reset button and it will say Engine oil new. Press reset again and this should set you oil life back to 100% .

Jun 13, 2010 | 2006 Mercury Mountaineer

2 Answers

How do you turn off the oil change light after the oil has been changed?


GM Oil Life System This system calculates the estimated percentage of the engine oil�s remaining useful life and alerts you through the DIC when it�s time to change the oil by displaying CHANGE OIL. Please remember to always reset the oil life system after an oil change.
Reset the oil life system Press and hold the control stem for more than two seconds while OIL LIFE is displayed. When completed, the system will reset and a beep will sound.
Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For Information & Contact Details.
Nice, but doesn't work for my 2006 Silverado. My manual says:
1. Turn ignition key to RUN with engine off.
2. Fully press and release the accelerator pedal 3 times within 5 seconds.

If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.

3. Turn the key to LOCK.

Aug 14, 2009 | 2006 GMC Canyon

1 Answer

Blowing smoke whilst driving


I would advise you visit a turbo specialist, as they may be cheaper fitting an exchanged reconditioned unit.
Turbos usually fail because they operate at very high speed and heat. They tend to use the same engine oil as the main engine, and while it is suitable for engine conditions, it may not provide the right lubrication for the bearings. This is why they wear their bearings and loose oil into the air inlet - producing lots of smoke.
This is like a designed-in failpoint.
The only way to avoid it is to fit an inline oil filter to the turbo, and change it often, along with more frequent oil changes.
Use the biggest standard oil filter that will fit your engine too.

Aug 06, 2009 | BMW 525 Cars & Trucks

3 Answers

2006 Saab 9-7 SUV 5.3 V-8 oil consumption


It is probabley worn rings so the best thing to do is at next oil change get a can of V-8 formula engine restore it takes the place of about half a quart of oil I think to be exact I think the restore for a V-8 is a 15 ounce can.Try that at oil changes.

Aug 05, 2009 | 2006 Saab 9-7X

2 Answers

I cannot get the Change Oil Soon message to reset on a Pontiac G6


Chevrolet Malibu, Malibu Maxx 2004-06; 2006 HHR, Cobalt, Pontiac G6, Solstice
Turn ignition to run engine off. Display OIL LIFE RESET in the Driver Information Center (DIC). Press and hold the ENTER button for at least one second. An ACKNOWLEDGED’ display message will appear for three second or until the next button is pressed. This will tell you the system has been reset. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Jul 17, 2009 | 2007 Pontiac G6 GT Convertible

3 Answers

How do I reset the "Oil Change Warning Indication" on colorado


if you have a owners manual read it. try coloradofans.com website and search the forums. i think johnny5846 is right if you don't have a DIC (driver info center). i believe you use the DIC(tripodometer). i don't know the sequence off hand, you can also you can change your lock settings and alarm settings, etc. with the DIC.

Jan 13, 2009 | 2006 Chevrolet Colorado

3 Answers

2006 Ford Explorer "Oil Change Required" light is still on after changing the oil


IF YOU FIND THIS INFO USEFUL PLEASE RATE ME AS A FIXYA! THANKS

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Oct 15, 2008 | 2006 Ford Explorer

Not finding what you are looking for?
2007 Mercedes-Benz C230 Sedan Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...