- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you have a multi meter.
You should have three post on your starter.
Two large and one small.
The small one is the energizer wire. That one appears to be working if your getting a click sound At the starter solenoid.
Then you will have a larger cable coming from the battery to one of the large post.
That post should have 12v at it.
The other large post will have the braided wire that goes into the starter motor.
That post will have 12v at it when you turn the key and energize the solenoid.
If you get 12v there and the starter don't work replace the starter.
The click sound you hear is the solenoid being energized and closing the circuit so it is working. most likely starter is bad.
Hope this helps Give feedback and good luck. FixYa
the power comes from the panel inside, to a hi press and a low press switch out in the engine bay. The suction safty or low press switch is locateded on the accumlator tank right at the fire wall on the passenger side. Check this switch BUT she is probabaly out of freon, or very low. Get a can and ck that first.
Check the fusible links at the starter. One of them may be burned. You mentioned that it shuts down when you turn a corner. Check the wiring going to the ignition switch under the steering column, you may have a loose wire there as well.