Question about Honda Accord

1 Answer

I've changed the fuses and bulbs, but the revers4e lights wont come on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 395 Answers

It sounds like the reversing light switch has become faulty. If you can locate the switch, check to ensure the connecting wires are tight and secure. With the ignition on, a check with a multimeter or test lamp should show battery voltage on one connector pin, when in neutral, and on both pins with reverse selected. It may be that the switch contacts are not making proper contact and only needs you to select and deselect reverse several times to get it working again. If the second test does not prove positive after this operation, replace the switch.

Posted on Sep 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Hyundai Accent (UK RHD). I've had a headlight go out, side lights and full beam still work. I've changed the bulb and fuse but its still dim. Ran out of ideas...


Hi ,Check the light bulb,see if its seat in the seats properly 'for earth' and the light terminals for dirts ,grease,or corrosion.clean if needs to.I think its a Earth problems

Dec 17, 2012 | 2002 Hyundai Accent

1 Answer

My rear running lights dont work even after i changed the bulbs and the fuses


Are the side markers and license bulbs working?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Nov 26, 2012 | 1990 Honda Accord

1 Answer

Brake lights wont work on our Volvo 2001 S60


fuse or relay are all the wires correct at the bulb clusters make sure these are fitted correct and the bulbs are the correct type either single or double pole bulbs

Aug 25, 2012 | 2001 Volvo S60

1 Answer

Headlights wont come on


if fuse under hood has blown there will be one in main fuse box that has blown as well fuses can look good but are bad need a comunity tester or multy meter to check connection

Aug 12, 2012 | 1997 Dodge Ram 1500 Club Cab

1 Answer

My dome light will not work on my 1997 Lexus ES300. I've checked the fuse and have installed a new light bulb. No power


I know a website that has every info on all vehicles and vehicle problems(common/basic and technical both), with their solution In detail.. it's www.reliable-store.com

Mar 04, 2018 | 1997 Lexus ES 300

1 Answer

I bought a target pre-lit christmas tree but half of it wont light up even though its all plugged.How do we fix it?


trystarting from the point that bulbs aren't working,take one of the replacement bulbs that usually come with the lights and replace them one at a time.just one replacement bulb to start then the one you took out put it in the next until either it lights up or you reach the last unlit bulb,but hopefully you dont get to the end because if you do then there's more then one bulb thats faulty. I've had that happen alot so dont give up..If the lights are on two separate wiring check for a glass fuse hidden on either ends of plug(wall or tree) I hop that helps.

Dec 03, 2011 | Cars & Trucks

1 Answer

No daytime running light no interior dash light


I am betting there are no tail lights as well , as they are on the same circuit as the cluster lights.

Change the fuse.
Note ; it could also be a broken filement in one of the light bulbs in this circuit causing a dirrect short , should the fuse blow right away after you've changed it.

Sep 28, 2011 | 2004 GMC Savana

2 Answers

Both brake lights went out at the same time i changed the bulbs but the brake lights still wont light up when i depress the brakes but my rear lights still work


ok so what your saying is that the tail lights still work but no brake lights work, you've replaced the bulbs, next step is to check the fuse for the brake lights, if its bad just replace it, if its good, you need to check the brake light switch thats located at the top of the brake pedal arm, ( up under the dash where the brake arm attaches to the mount, you will see a switch,,, sometimes they just get stuck, so depress the brake and see if the switch is moving at all, if not, remove the switch and replace it as long as the adjustment looked to be correct.

Sep 10, 2011 | 2008 Dodge Nitro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...