Question about 1994 Land Rover Discovery

2 Answers

Cobra immobiliser key

I have a cobra cat 2 immobiliser fitted to my land rover discovery, i have unfortunatley lost the deactivation key and want to know how to go about finding a replacement without having the serial number.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

After ages searching finally found this on the Cobra site.... A8510 KEY PROGRAMING Ensure the immobiliser is disarmed :- 1) Switch the ignition ON and OFF three times then back to the ON position within seven seconds. 2) The LED on the dashboard will light up signaling the unit is in programming mode. 3) Touch an already programmed key onto receptical, the LED will extinguish for one second 4) Repeat step 3 for all other keys (Max of 4 touch keys) 5) To exit programming switch off the ignition key (unit will automatically exit programming after four keys) NOTE :- 1) Programing procedure can only entered with the system disarmed. 2) If all keys have been lost the system will need to be replaced

Posted on Jun 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi bullethead

The only way to program a new touch key on a cobra 8510 immobiliser is with your existing touch key. If you lose that one then your system will lock out and have to be removed. So be warned!
I can supply you with a new touch key along with the programing instructions if you still need one. Give me a call on 021 242 5276 if you still need one.

Hope this helps

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of immobiliser on a 1997 land rover discovery


IMMO. 1997 LC?
its in the FSM. book. (check)
my database has zero rover, drawings..
get the FSM from Rover?

May 08, 2014 | Land Rover Discovery Cars & Trucks

1 Answer

Key fob would not open 1995 discovery ,used key in door then alarm went off ,after a few seconds alarm ceased then put key in to start engine and got nothing now cant lock doors with key but red light is...


The red light means the Immobiliser has not been turned off, the deactivator in the key must not be working correctly, visit your local land rover dealer who will be able to make sure the key is paired to the car correctly, otherwise you may need a new key.

Feb 11, 2011 | 1995 Land Rover Discovery

2 Answers

My battery is flat and my Discovery 3 cannot be


on the passanger door there is a cap that can be removed (small casing) behind is a key barrel which youre key will fit in and unlock the door for you to enter

Apr 17, 2010 | 2004 Land Rover Discovery

1 Answer

Where are the o2 sensors on discovery ii


There are two, one pre-cat, one post-cat! Both need a 22mm crowsfoot spanner, and care must be taken as they are easily damaged by dropping, excessive heat or contamination.

Mar 02, 2010 | 2000 Land Rover Discovery

1 Answer

1997 Discovery 300 tdi. Locked the car with the handset, but when i tried to open it would not. I had to open with key, but the car stays immobilised.Key symbol flashes on dash as soon as i turn key.New...


NOTE: No synchronization required after battery replacement.
How - 1996

NOTE: Remote control contains a transponder and MUST be attached to the same ring as the ignition key.
Unlock the vehicle using the key. Deactivate alarm.
NOTE: Alarm system can be disarmed using 4 digit code from vehicle security card as detailed in the owner's handbook.
Switch ignition ON. Switch ignition OFF. Remove ignition key. If battery replacement has taken longer than 5 minutes: Deactivate the system using 4 digit code from vehicle security card as detailed in the owner's handbook. Hold the remote control close to the vehicle. Press either button of the remote control 4 times or more in quick succession.

Jan 26, 2010 | 1997 Land Rover Discovery

1 Answer

Is it possible to fit land rover discovery 2 wheel hubs to a land rover discovery 1?


is their any difference?? i would really need to get my hands on and around this to see whats what ,but i should think it could be done

Jan 02, 2010 | 2004 Land Rover Discovery

1 Answer

Would a trasfercase from a land rover discvery 1996 fit on one land rover discovery 1999


Yes, it will fit. You may have to fit your original handbrake backplate assembley, i think.

Dec 13, 2009 | 1999 Land Rover Discovery

1 Answer

Landrover not starting


Hi,
This is something that will only get worse I'm afraid.
You really need another key made to the original spec. By this - I mean a key cut to code - not just copied, that includes the immobiliser unit.
You can get one from a Land Rover dealership, but will be cheaper from a good locksmiths that cut immobiliser keys to code + program the immobiliser chip.

Feb 01, 2009 | 1995 Land Rover Discovery

Not finding what you are looking for?
1994 Land Rover Discovery Logo

2,447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...