Question about 1996 Chevrolet K1500

2 Answers

The turn signals on my 96 chevy 1500 pickup will work, stop working then start working again. What would cause this?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

You need to replace the turn signal relay under the dash. i believe on that model it is a round glass or metal relay that just hangs down from under the dash. it can sometimes be located in the fuse box. the do make noise (to remind you the turn signals are on) so it's easiest to locate it when they are working. if on the other hand you put a turn signal on and it stays lite or flashes very rapidly... you have a bulb burnt out on that side

Posted on Sep 28, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Check all the earth's to the turn light's to make shore they are clean and well earthed.also check that the flasher unit is not in need of replacing.

Posted on Sep 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 gmc 1500 z71 and my 4x4 indicators cuts in and out and so do my turn signals they just stop working then will start working again worse on rainy days and ideas


Sounds like you have a lose ground , both turn/ hazards an 4X4 switch share Ground G203 .
G203
On the left upper IP at the A pillar
(1) Splice Pack 203 (SP203) (2) Ground 203 (G203) (3) Dash (4) A-Pillar
You will need to take parts of your instrument panel apart to get at it.
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

Feb 02, 2016 | GMC Cars & Trucks

1 Answer

96 chevy silverado, taillights just stopped working... nothing to cause this effect. they worked the night before. they just stopped. b/u brake hazards and turn signals all work. checked all fuses in the...


The turn signal switch in the steering column has a short in some models. Have someone watch your brake lights and move the 4 way flasher on top of the column from left to right without deploying the switch for the 4 ways. If your brake lights flash ,the harness needs to be replaced if they are still available. Harness around 300.00 plus labor.

Jan 10, 2013 | 1996 Chevrolet K1500

1 Answer

96 chevy pickup cranks for a long time before it starts. what gives?


could be a bad sensor, fuel pressure regulator also recommend checkin fuel pressure for fuel pump and fuel filter

Dec 07, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

1993 chevy silverado parking lamps go of when i turn on headlights, signal lights flicker when i press on brake.


Yes I would look for a ground circuit problem. I would look at the ground wires for the headlights first. Even run a new ground wire for the tail lights to see if it helps.
Could be a ground connection for the body to frame or body to battery.

Aug 10, 2012 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Problems shifting into overdrive in my 96 chevy 1500 4x4


i have a 90 chevy 2500 2wd 350ci.when i go to start my truck the key turns hard in the ignition,the check engine light and brake light come on the heater dont work,and the transmission will shift from 1-2 at real high rpm and shift hard,no 3-od.this comes and goes,but all happens at the same time.some times it last for 10 min,sometimes its days.what is going on?

Apr 24, 2012 | 1996 Chevrolet K1500

1 Answer

I have a 96 Chevy Silverado 1500... Turn signals and hazzards work sometimes... how do I fix it?


Check all the bulbs, relays socket and wiring to make sure they are okay.

Apr 22, 2012 | 1996 Chevrolet K1500

1 Answer

94 Chevy 1500 truck, seems to be getting fuel, pump sounds like working when checked. Replaced Mapping sensor, had distributor check, but truck continues to run fine for awhile, then just die for no reason...


These sometimes have problems with the magnet on the distributor shaft loosing magnetism. This causes the pickup coil not to be able to produce a strong enough signal for the ignition module and the engine dies because of no spark.

Apr 11, 2010 | 1994 Chevrolet K1500

1 Answer

1998 Dodge 2500 pickup turn signals, hazards


There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Oct 08, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

GMC sierra 1500 '96 blinkers and brake lights will not work


i would replace the brake light swtich first its more likly too go bad than the turn signal switch

Feb 20, 2009 | 1998 GMC Jimmy

1 Answer

Turn Signals work intermitently on 2000 Dodge Ram 1500 Pickup


My turn signals worked fine until last night when I ran my battery down and had to get a jump. I realized right away that my turn signals suddenly didn't work. My theory hasn't been tested, but I am going to unhook my battery cables and reconnect again to see if that does anything. If not, I'll check out the steering wheel and that big square thing by the fuses. Thank you for all the posts and I was so happy to find this web page!

Dec 05, 2008 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...