Question about Chevrolet Camaro

2 Answers

Need the ignition wiring diagram for a 1994 camero from the ignition key to the engine computer

Posted by on

  • 1 more comment 
  • jrking911 Sep 28, 2010

    my email is jrking911@msn.com

  • jrking911 Oct 02, 2010

    there are 4 large plugs on the cumputer they all have there own color witch one is for the ignition and for the fuel injectionby color

  • jrking911 Oct 04, 2010

    I need to talk to some one who has put a 94 or newer chevy LT1 in a older chevy.min is a 1956 bel air.I want to bypass everything I can and just run the engine main functions

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Your diagrams are ready, please provide an email address to send diagrams to, this site only allows 150k images.

Posted on Sep 28, 2010

  • Rene J Solis Sep 28, 2010

    Your wiring diagrams (for the whole electrical system), have been sent. to the email address you provided. If you need further assistance just post a comment/

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

need the ignition wiring diagram - 4b35dc7.jpg

Fig. 1: 3.4L (VIN S) engine control wiring diagram (1 of 3)-1993-94 vehicles

f45aaaf.jpg

Fig. 1: 3.4L (VIN S) engine control wiring diagram (2 of 3)-1993-94 vehicles



Fig. 1: 3.4L (VIN S) engine control wiring diagram (3 of 3)-1993-94 vehicles



f8a907a.jpg

Fig. 15: Chassis wiring diagram (1 of 3)-1993-95 vehicles

cb81266.jpg

Fig. 16: Chassis wiring diagram (2 of 3)-1993-95 vehicles

771dbd8.jpg

Fig. 17: Chassis wiring diagram (3 of 3)-1993-95 vehicles

There also have 5.7L engine, confirm if this its your right infor, or if need other engine sizes info.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 1994 Chevy suburban there's no power to anything that would be powered up when the key is on all items except the door locks work i.e. head lights, dome lights. And cigarette


Ignition switch possible or a main fusible link. go to http://www.bbbind.com/free_tsb.html free wiring diagrams .Enter your vehicle info . year , make , model an engine . then under system click on electrical distribution . subsystem -power distribution . Click on the search button ,then the blue link . Check out the wiring diagrams .You'll need to do some voltage testing to find if voltage is missing . This vehicle has eight fusible links ,one feeds the ignition switch . On the fire wall there should be a junction block where all these fusible links are connected to a main wire from the battery . You can try to see if one is burnt by pulling on them , you will feel the insulation stretch if burnt inside .

Jun 24, 2016 | 1994 Chevrolet Suburban

1 Answer

A diagram for a 1994 v6 Camaro spark plug wires


go google and type in --firing order v6 camero 1994 model
--

Jan 20, 2016 | Cars & Trucks

2 Answers

My 1999 tahoe got a 350 in it what could stop it from firing


bad crank position sensor
bad ignition module
bad spark plugs
bad wiring
weak battery
bad computer
the list goes on....

Do you have any check engine codes showing up? A proper diagnosis of the symptom will yield you a faster and less expensive repair.

Feb 02, 2015 | Cars & Trucks

1 Answer

I need an under-dash ignition wiring diagram for my 1994 Ford Ghia Telstar TX5. I hear its the same as the Mazda 626 or MX-6 of the same year, is that correct?


mazda and ford used the same base vehicle ,the differences were cosmetic and badge swapping. A workshop manual for either vehicle should help you in this problem

Dec 15, 2014 | Ford Cars & Trucks

1 Answer

Starter wiring diagrams


d4d7f1b4-cd24-4a66-8fcb-077a7f917a28.jpg

hope it helps I suspect that you have a starting problem usually there is 2 little wires Inside column steering connect to cyllinder key are cut
you can test it at the end of steering column 2 very little yellow wire ...put key in ignition cylinder and with ohm meter take resistor value if none wire is open circuit.

Jul 02, 2014 | 1994 Pontiac Firebird

1 Answer

94 3.1 grand am plug wiring diagram


1994 Pontiac Grand Am 3.1L 6-cylinder Firing Order

11_29_2011_10_48_12_pm.jpg

Fig. 3.1L (VIN M) Engine Firing Order: 1-2-3-4-5-6 Distributorless Ignition System.

One can verify that this Firing Order Diagram applies to your 1994 Grand Am, by making sure that the 8th digit of VIN is "M" (for this 6-cyl 3.1L engine type), and the 10th digit of VIN is "R" (for model year 1994).

Nov 29, 2011 | 1994 Pontiac Grand Am

1 Answer

Where can i have a spark plug's schema of the pontiac transport 1994 3.1L ?


If you're looking for the firing order diagram, this is it:

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason, it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 3.1L Engine Firing Order: 1-2-3-4-5-6 Distributor Rotation: Clockwise 91092g13.gif
Fig. 2: 3.4L Engine Firing Order: 1-2-3-4-5-6 Distributorless Ignition 91092g14.gif
Fig. 3: 3.8L Engine Firing Order: 1-6-5-4-3-2 Distributorless Ignition 91092g18.gif
prev.gif next.gif

Oct 17, 2010 | 1994 Pontiac Trans Sport

1 Answer

I need a diagram for a 1994 camaro serpentine belt diagram 3.4 liter


There should be a diagram on a sticker under the hood lip of your camero (nice car by the way)

Oct 11, 2009 | 1994 Chevrolet Camaro

1 Answer

Ignition wiring


firingorder6a.gif firingorder6.gif 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

Nov 22, 2008 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

7,237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...