Question about 1994 Oldsmobile Cutlass Supreme

3 Answers

Car will not start

I am having a problem with my car starting.What can it be when the ignition turns over but it will not start?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Make shure u have a spark on ur sprplug wires disconect a sparplug wire have some body start the car put the wire that u disconect close to ground ( metal ) if u have a spark then u have a fuel problem check ur fuel presure if u dont have any check ur fuel filter if thats ok r and r ur fuel pump good luck

Posted on Dec 02, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The same thing happened 2 ma car it wouldn't start u might need a new fuel pump

Posted on Aug 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 611 Answers

Try a good injector cleaner chevron techron more than likely you got injectors that aint working if ur lucky there just dirty also check plugs n wires

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont start turn ignition to start nothing happens,checked relays,turned on ignition jumped starter car started right up.wont start by useing ignition


Try replaceing starter relay with another of your relays. make sure they have the same part number on them if you switch them and it starts replace relay with new.

Feb 20, 2015 | 2004 Lincoln Aviator

Tip

How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe


Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident. <br /> The flashing light on your car is telling there is a problem. <br /> <br /> <b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b> <br /> Ignition Key Method: <br /> <ul> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 2 seconds.</li> <li>START Car (the light may be blinking slower than before).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 3 seconds.</li> <li>START Car.</li></ul> <br /> <b>This is a little easier</b> To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away

on Dec 07, 2010 | Infiniti G35 Cars & Trucks

1 Answer

My 97 geo prism starts when you put the car to ignite but after that it won't stay running what could it be


First turn of the key energize the car electrical circuits for some circuits radio ets. 2nd turn of the key energize the the starting cycle, when you turn the key to the third spring loaded start mode it completes the circuit to the starter solenoid which engages the starter and start the car, the spring in ignition return the key to ignition on.
Maybe you have a malfunction in the ignition on position. Dont have a large bunch of keys hanging in your ignition, it sings back and forth when the car is in the start mode and cause havoc to your ignition switch.

Jan 12, 2014 | Cars & Trucks

1 Answer

Is there a way to reset the ignition


use the ignition switch master key. turn the ignition switch for ten minutes until LED ignition warning light go off.then turn off ignition switch wait 5 seconds then try to start engine. if this procedure starts your engine have dealership or garage to check out theft security system.

Jul 28, 2013 | Cars & Trucks

1 Answer

If I have to turn my steering wheel or move it up and down for it to start whats my problem.


Sounds like a possible short inside the colum, I would check the ignition switch (key switch) if not that check the ignition switch from there check for a short in the steering colum.

Sep 13, 2012 | 2002 Cadillac Deville

1 Answer

My 94 Taurus will not turn over. Lights work...I replaced starter then ignition switch. Car will not turn over. It has a history of intermittent starting problems. It may or may not start. Now it...


They have a bad ignition problem. Its more than likely the ignition. Turn the key on, Then right below the ignition theres a hole. take a long skinny phillips screw driver and push it up through the hole and you will hit a release for the ignition. Push it up as you pull the ignition out. Then try to start the car with a flat head screwdriver. Write back if that doesn't work but i have a feeling it will.

Jul 10, 2011 | 1994 Ford Taurus

1 Answer

The car cranks too much and sounds as though


your fuel pump is getting weak. when you turn your key to the on pos. you should hear a hum from the back of the car. GM's are good for having the fuel pump go out. and you can test it or take it to a shop and have it tested.

Apr 06, 2010 | 2004 Pontiac Grand Am

2 Answers

Need to remove the ignition because it wont turn to start. How do we get the ignition out. Or how to fix so we can turn rhe key and start the car


need to remove the ignition because it wont turn to start. How do we get the ignition out?. Or how to fix so we can turn rhe key and start the car

Jul 04, 2009 | 1996 Chevrolet Cavalier

1 Answer

1992 Volvo would not start using the ignition switch


Have you check your wiring to the starter?

Mar 04, 2009 | 1992 Volvo 240

2 Answers

1999 Olds ignition switch problems


Hi....
In your Intrigue to use the New Passcode sensor .
You need to program the new Passcode to the ECM. of the Vehicle.
This is a prosses that involve around 30 minutes maybe a little more.

Remove the old Ignition switch.
Install the new Ignition switch. with the new Passlock sensor.
Turn the key to on position and try to start a few senconds. them leave the key on run position.
For 10 minutes and NOT more than 11 minutes.
Them turn the key to OFF position for exactly 30 seconds.
Them turn the key to Run position 10 minutes or 11.
them turn back the key to OFF position for 30 seconds.
Them turn the key to Run position 10 minutes or 11,
Turn the key to OFF position and wait 1 minute, them try to start the vehicle.
If the car start you are DONE.
But if Not Letme know to give you more information.

OK I hope this help to try solve your problem.

Thank you for use fixya...

Nov 15, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...