Question about 2002 Ford Escape
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off
Posted on Jan 05, 2009
SOURCE: 2002 ford escape tie rod squeaks
My outer tie rod did the same thing when just out of warranty. I could tell it was "bad" by putting my hand on the tie rod while someone else turned the steering a little and I could easily feel the vibration.
Check the other side to feel the difference. Tie rods don't cost that much, if you can replace it yourself, and take a chance on foregoing the wheel alignment. Maybe a $150? job at the shop.
In my case, a tie rod was not readily available. I verified that it was a good joint; no shake or rattle. Then I squirted a little WD40 inside the boot, and put it back together. 70,000 miles later, the new tie rod is still on my shelf waiting for the squeak to return.
Posted on Mar 17, 2010
If the cruise lamp comes on and the cruise does not set i would advise inspecting the cruise cable and make certain it is not broken, if ok the the servo has likely failed.
Posted on May 29, 2010
Tips for a great answer:
May 25, 2016 | 2002 Ford Escape
Apr 13, 2011 | 2002 Ford Escape
Dec 08, 2010 | 2002 Ford Escape
Apr 10, 2010 | 2002 Ford Escape
Apr 04, 2010 | 2002 Ford Escape
Feb 27, 2010 | 2002 Ford Escape
Jun 06, 2009 | 2003 Ford Escape
Aug 19, 2008 | 2002 Ford Escape
Aug 08, 2008 | Ford Escape Cars & Trucks
60 people viewed this question
Usually answered in minutes!