Question about 1999 Audi A6

1 Answer

Center display on dash only showing gear selection

Hi  The center dispaly on my Ar 2.8 Audi quatro is only showing the gear selction when the car is in gear. On start up it comes up with the usual info but as soon as i select drive the only thing showing is the gear selection

Posted by on

  • Anonymous Feb 18, 2009

    center info center only displays the gears and that it. No radio station info or temp info. lights work



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Right side of steering wheel there is a control stickBottom of that stick there is a press button, that is a selector for the that display functions. Try that. Sorry I forgot actually what that stick controls.
Good luck.

Posted on May 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 audi a4 quatro 2.8l DOHC check engine light is flashing and my scanner gave the fault code p0305 and a pending code p1340 . What should I do tofix the problem?

p 0305 is misfire on no 5 cylinder code p1340 refers to camshaft (CMP) sensor 1 bank/ crankshaft position (CKP) sensor ---out of sequence === causes ---valve timing--CMP/CKP sensor installation---CKP sensor rotor
misfires are more injector problems that plugs
take it to an authorized service center for the position senor and valve timing problems

Dec 12, 2016 | Audi Cars & Trucks

1 Answer

How to safely remove Center Dash Pocket and multi function display in 2006 Subaru Outback

Hopefully you've answered this by now. This is for installing an Iphone adapter, but shows the procedure:

Feb 03, 2016 | Subaru Cars & Trucks

1 Answer

How can you check to see if the pos. battery cable from alternator to battery is good on a 2003 audi a6 quatro

You will need a self powered continuity meter to test the cable.

1) Disconnect the cables from the battery
2) Disconnect the cable from the alternator if possible
3) Using the meter attach one lead to each side of the alternator cable
Most meters have an audiable sound if there is continuity. If the cable is good, the meter will beep and the display will show a low number.

If the cable is bad, the meter will show a high number, or the infinity symbol.

Dec 01, 2013 | 2003 Audi A6

1 Answer

Towed 2001 audi a4 quatro with a dolley tow truck...the car will not go when put into any gear..the car is a 5 speed

If you only put two wheels on a dolly, even in neutral, you smoked the center diff. Quattro cars must be flatbedded. Gonna have to replace the center differential.

Mar 08, 2011 | 2001 Audi A4

1 Answer

A circle light is displayed on the dash of my audi A6 3F year 2000

Hello! The circle means your brake pads need to be changed.

Here is a link for a "Quick Reference Guide" which clarifies your dash warning lights.

Google "All Audi A6 warning lights with an explanation"

Click on the forth selection ( you can make sure it's the correct choice by reading the address before you click). It is

Then download the guide. Page 2 shows the dash and identifies each light.

Dec 12, 2009 | 2000 Audi A6

2 Answers

2001 Audi A4 Dash LED

might need to be replaced it could be faulty might be able to be fixed put recomend get replaced cause if u get it fixed chances are same thing could happen again so just get replaced its safer and more reliable

Nov 07, 2008 | 2001 Audi A4

1 Answer


If you have an Audi Q7, locate the "Car" button on your console, the screen will prompt you to check settings, select TPMS and then select new tires, this will recalibrate your TPMS.

Hope this helps.

Aug 13, 2008 | 2007 Audi Allroad Quattro

3 Answers

Fault code 0562.oil level sensor light on dash display.sensor replaced dash still displaying oil level

I also have a 2004 Audi A4 3.0 Quatro and the low oil sensor comes on periodically. I pull the oil dip stick and put it back and it goes away. Maybe it will work itself out.

Aug 05, 2008 | 2004 Audi A4

Not finding what you are looking for?
1999 Audi A6 Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77932 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides