Question about 2003 Dodge Neon

Open Question

My dodge neon has codes p0300 and code p2305..replaced coil..plugs..wires..map sensor..cam sensor and checked for broke wires..still fumbling on its face and wont accelerate..rpms go high and car goes nowhere..???

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 76 Answers

SOURCE: 2003 2.0l dodge neon

i would start by checking plug wires and spark plugs for proper gap replace if necessary check for compression in all cylinders i dont know what your codes are

Posted on Sep 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 dodge neon that will crank but wont start. I have replaced the cam shaft sensor, crank sensor and the coil pack. Iam also not getting spark to the coil pack. Any suggestions?


Primary voltage to several systems, including the ignition coil, dark green wire with orange tracer. That voltage comes from asd relay. There is a fuse for asd relay. To check for voltage the engine has to cranking. The control side of asd relay, the computer has to ground it before it will energize. Did you check wiring circuits for cam and crank sensor connectors before replacing sensors? Are there any applicable trouble codes?
Are you ok with testing wiring circuits?

Feb 16, 2017 | 2005 Dodge Neon

1 Answer

It has a stutter when driving.


Check fuel pressure, and check for possible trouble codes. Autozone or O'reilleys will do free code scans. I think they also loan or rent fuel pressure gauges.

Mar 11, 2015 | 1998 Dodge Neon

1 Answer

2305 sebring


Hi A Vig, I'm glad to help! P2305 is a Secondary Ignition Circuit problem that will cause the Misfire code P0300. Sounds like you have already replace everything that would cause the P2305 code. Sense it's a circuit code, there is always a possibility that you could have a wiring issue. One place to check is where the wire lume runs over the front of the transmission. We've seen wiring issue here at the dealership a lot in that area. Check and see if any wires are frayed a shorting out, and also check the connector and wiring at the coil pack itself. I've found a broken wire there before. Also you might swapping the ASD Relay with another one that looks the same to see if it may be the relay thats defective. Hope this helps and have an awesome day A Vig!

Apr 20, 2014 | 2003 Chrysler Sebring

1 Answer

2004 Dodge Stratus 2.4 DOHC. Was misfiring and barely running. Code showed P0300, P2302, P2305, P0700. Found Coil Pack had a burned spot near the #2 wire and large crack between #2 & #3! Replaced Coil and...


Reminds me of when a friend of mine had a car with carbon tracks on the distributor cap. I wiped it clean and it worked perfectly. Are the plug cables going to the correct cylinders in the correct order? A hanes service manual actually put the wrong order down in a mustang manual.

Oct 04, 2013 | 2004 Dodge Stratus

1 Answer

2003 2.0l dodge neon P2305 P0300 codes... plugs 2 and 3 not firiing. replaced coil pack no change


i would start by checking plug wires and spark plugs for proper gap replace if necessary check for compression in all cylinders i dont know what your codes are

Sep 16, 2011 | Dodge Neon Cars & Trucks

2 Answers

I have a 1999 Pontiac Grandam that is pulling code P0300. I have changed the head gasket, plugs, boots, both coils, ignition module, crank and cam sensor's, had to get a new timing chain tensioner and...


The only thing left would be fuel. Check fuel pressure , replace the fuel filter, and check the injectors(ohm's from 11 to 15) and the injector harness. Mostly on the harness make sure you didnt pinch a wire putting it back together, especially the map and coolant wires.

Feb 02, 2011 | 1999 Pontiac Grand Am GT

1 Answer

How are you... I have just bought a 2006 Dodge Magnum (2.7 liter V-6). I have a check engine light on and I am receiving 2 Codes with my Auto Scanner Plus. 1). P0300: Random/Multiple Cylinder Misfire...


that is the coil on top of #5 spark plug. you can replace the coil or switch it to another cylinder and see if you get a different code. misfire codes are 301-306.

Dec 18, 2010 | 2006 Dodge Magnum

2 Answers

CODES P0300 P0303


These codes are codes regarding failure. The code P0300 means repeated Engine Misfiring. The code P0303 means Repeated Misfiring of Cylinder Number 3. Kindly contact a technician to get both checked. Their Heads must have been misplaced or broken due to misfiring.
Thank you sir, Have a nice day.

Sep 26, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
2003 Dodge Neon Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...