Question about 2005 Peugeot 405
What does the word plip battery spent mean on a peugeot 307. It says that when i first turn on the ignition.
Posted on Dec 15, 2010
It's complaining about the battery in the key fob. Ether there is a source of interference close by (I'm told WiFi can upset some remote fobs) OR (maybe) the battery in the fob really does need replacing ...
Posted on Nov 05, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 28, 2016 | Cars & Trucks
Dec 31, 2015 | Peugeot Cars & Trucks
Feb 11, 2015 | Peugeot Cars & Trucks
FOB / PLIP PROGRAMMING :
406 deadlocking remote control has specific button controls, and if the vehicle
has two controls, one is set as primary and the other as secondary.
replacing the Plip, a Primary or Secondary Plip are different part numbers and
must be ordered as required. The white label inside the Plip is labelled PRIM
Turn the Ignition switch ON.
Press the large Plip key button (Primary Plip)
Within 10 seconds press the large Plip key button (Secondary Plip)
If there is one remote, press the Primary plip button twice.
Turn ignition OFF.
Test Plip's for correct operation.
NOTE : On some 406 models, Plips cannot be re-synchronised unless the battery has been disconnected for 1 minute
Oct 27, 2012 | Cars & Trucks
Feb 20, 2012 | 2005 Peugeot 307 SW
Feb 03, 2011 | Peugeot Liberte Cars & Trucks
1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.
2. Hold the Plip key close to the central locking receiver mounted in the roof console.
3. Press the large plip button and then the small plip button on the remote.
4. Repeat for second Plip key if required.
5. Turn the ignition OFF.
6. After 5 seconds the Plip should now operate.
1.Switch off the ignition
2. Switch on the ignition
3. Immediately after switching on the ignition, press the large remote button
4. The remote should now be working again.
Jan 07, 2011 | 2005 Peugeot 405
Dec 18, 2010 | Peugeot Liberte Cars & Trucks
Jan 21, 2010 | 2005 Peugeot 405
3,328 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: