Question about Jeep Liberty

1 Answer

When my lights are on they'll blink off then on again.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Jeep Master
  • 76,164 Answers

Replace the headlight switch and check the plastic connector to the headlight switch for signs of overheating, replace the connector if any connector is burned looking

Posted on Sep 27, 2010

  • Freddy Sep 28, 2010

    It's not stated what year this vehicle is, it may have a relay to control the headlight. Relay could be going bad.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine check lights is blinking in and out and the car shakes in the front end. What is an issue that i should be looking at?

you need to get engine codes read go to most parts stores and they will read them for free then you'll have an idea whats wrong

Aug 25, 2012 | 2004 Chevrolet Impala

1 Answer

2005 malibu wont idle

Hi there:
Is the check engine light on or blinking? A blinking light means that the engine is misfiring bad. I suggtes scanned the computer car in order to know fault codes stored there.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 23, 2012 | 2005 Chevrolet Malibu

1 Answer

A/C light blinking.

You'll have to figure out if it is low on freon or an electrical problem.
The light flashes to let you know there is a problem in the system.

Jul 10, 2012 | 1999 Toyota Camry

1 Answer

Toyota corolla 2003 air conditioning green light blinking and cold air not blowing

You've figured out by now the blinking light means the system has a problem. You'll need to find out if the system is low on freon or if a relay or electrical part is failing. The cooling fan could also be failing to come on, which would make the high side pressure exceed the limit and shut down the system.

Jun 24, 2012 | 2003 Toyota Corolla

1 Answer

2001 montero xls. Right front signal blinking fast and right rear not blinking at all

right rear bulb needs fact....replace all the bulbs at once...that way you'll be free from these headaches for a few years.I just did that on my 2002 accord....when the first brake light went out after 7yrs, I had them all done, including the license plate light was worth it....just think of the tickets you won't get

Apr 27, 2012 | 2001 Mitsubishi Montero

2 Answers

How to get the engine light off on a 2002 Jeep Grand Cherokee after having my termostat changed?

You need to read the computor, I believe if you turn the ignition three times without starting it, and the engine lite will blink, that is how you read the codes, long blinks are ten, two long blinks is 20, and the faster blinks are one, get back to me what the codes are and i'll help you.

Dec 11, 2011 | 2002 Jeep Grand Cherokee

1 Answer

The engine light is one & the light with the key inside is also coming on which is causing my truck to shut off while driving

If the "check engine" light illuminates, it will either blink or remain constant, depending on the problem. Either way, you should have the vehicle checked by a mechanic, although a blinking light or, on some cars, a red light instead of a yellow/orange light indicates a problem that needs immediate attention. In late-model cars, a blinking light usually indicates an engine misfire so severe that unburned fuel is being dumped into the exhaust system, where it can quickly damage the catalytic converter, requiring an expensive repair. If that happens, you should reduce power and have the car or truck looked at as soon as possible. If the light is steady, the problem is not an emergency, but you should schedule an appointment as soon as possible.

Check codes stored with this procedure... turn key at on/off on/off on position (dont start engine) and read the odometer codes some number as Pxxxx code, note this and send us the information to give additional tips.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 01, 2011 | 2000 Jeep Grand Cherokee

1 Answer

After getting my car repaired by a good samaritan, who helped me replace a leaking radiator hose and after the replacing a defective radiator cap, the check engine light started blinking, as well as the...

I do not know the answer to your codes. What I do know is that if you replaced a Radiator hose and Cap and did not fill the radiator properly afterwards that an air pocket could have developed in your System.

I would suggest that you leave the car sit over night, then in the morning before you start the car check the Radiator to see if it is full of fluid. Do this by opening the Radiator Cap and have a look inside. Fill the Radiator if it needs to be filled at this time.

Now put the radiator cap on but put it on loosely. Only tighten it enough that it cacthes but will not come off. At this point you can start the car and let it warm up. Let it run until the radiator hoses are good and hot. Top and bottom or until you notice that the level of coolant in the Radiator has dropped. Check that by removing the cap when the hoses are starting to get hot. Be sure that you do not open a radiator cap that is on tight. If you do then the presure buildup will cause the hot fluid to come spraying out and burn you. As I said earlier the cap must be put on loosely. This allows air to escape and no presure to build up.

When the radiator fluid level drops then any air that is in the system should have circulated out of it. So now fill the radiator again, slowly as not to cause a spray back. Once the radiator is full again then repalce the cap. Put it on tightly this time and be sure that your over flow tank is fill to the proper leval.

Repeat if you feel that you still have an air pocket in the system.

If this was not done when you replaced the hose and cap then you do have an air pocket. Hopefully this proccedure will remove your air pocket and stop your warning lights from blinking.

Good luck

Jun 22, 2011 | Honda Odyssey Cars & Trucks

1 Answer

Lights blinking and no lights on dashboard

hav car scanned for free at discount auto-OBD ll will analyse--u mite try disconnectin batt for 30 sec

Sep 04, 2009 | 1998 BMW 5 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides