Question about 2002 Chevrolet Blazer

1 Answer

My car won't start; the engine turns over but it won't start

Posted by on

  • cheap repair Sep 27, 2010

    does it start for 1 or 2 seconds? if so you may have a bad crank position sensor

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

You could have a bad fuel pump.Can you hear the pump running when you turn on the key?Take off gas cap have someone turn key on listen at gas tank to see if you can hear fuel pump running if not bad fuel pump.Hope this helps
D.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does your car turn over but not start


Why does your car turn over but not start Jalani, could it be out of gas. Have checked for diagnostic codes. The list of why a car will not start is extensive, check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Engine cranks but won start Troubleshooting tips
What to do if your CAR WON START
Problem 5 Engine Cranks But won Start
Troubleshooting Car That Won Start

May 29, 2016 | Cars & Trucks

1 Answer

1993 Subaru loyale Engine won't start distributor


if rotor (this is the one that turns and not the distributor), then its either your starter is broken or you have a drained battery.

also, for worst cases, your timing belt/chain is broken

Jun 12, 2013 | Cars & Trucks

2 Answers

Engine won't start distributor won't turn


no your timming belt broke!!! now if you have a interference engine you will need a new car!!!
the only way to know is if you search your year make and engine size of your car..
you better hope its a non interference engine .. than just change the belt.. good luck. this is a basic timming belt photo . engine-start-distributor-turn-rbr12kxjqsqvwnu2khrshnjz-4-0.jpg

Jun 12, 2013 | Cars & Trucks

1 Answer

Disconnected battery and now won't start


Won't start as in no rotation of the starter motor and no clicking sound? Or starter turns slowly with the engine? Or the starter and engines turns normally but will not start? Or starter turns normally but engine will not turn?

Oct 15, 2012 | 2004 Jeep Grand Cherokee

1 Answer

My 1999 buick turns over but won't start I had the ignition module checked & it was ok it appears that i am getting spark any ideas why it won't start?


It could be that your fuel pump is not getting enough fuel to the engine to start it. Is your starter turning over or trying to start the engine.

May 24, 2011 | 1999 Buick LeSabre

2 Answers

Front right side hit . replaced concerter and won't crank over /or start fuel pump doesn'd even come on when key is on ?


ricks63toy, I believe that Ford still uses what is called an inertia switch even in the hybrids. This switch will shut off in the event of an accident shutting off the fuel pump. This is a safety feature built into the vehicle. Seeing that this is a newer vehicle I trust that you still have the manual. If not, the switches are usually located in the trunk. Look on the side walls of the trunk and see if you can locate it. It is usually marked by a sticker. When you find the switch, push the red button down until you hear a click. This will reset the switch and allow power back to your fuel pump. Good luck with this.

May 17, 2011 | 2010 Ford Fusion Hybrid

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...