Question about 1993 Isuzu Trooper

1 Answer

Fitted new waterpump to isuzu trooper 1993 v6 petrol timming ok will turn over and fire once then floods plugs petrol

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi,


These are the steps you need to do :


1.Never crank the engine. This can easily cause more expensive damage.

2. Remove all induction components i.e. air filter box, air metering devices and all air ducting and disconnect injectors (electrically)

3. Remove Spark Plugs (Petrol engines) or Glow Plugs (Diesel engines)

4. Dismantle as required to allow water to escape from throttle body and inlet manifold.

5. Reverse step 4

6. Crank engine by hand to check timing

7. Crank engine with throttle pedal fully depressed until all water is ejected; but beware of high pressure water being ejected from combustion chambers. Reconnect Injectors

http://www.car-docuk.com

8. Re-fit one spark or glow plug and crank again. The engine should "cough".

9. Re-fit second spark or glow plug and crank again. The engine will "cough" and may even run.

10. Re-fit third spark or glow plug and crank again. The engine will probably run.

11. Re-fit the fourth plug and crank again. The engine should run.

12. Ensure all induction components are dry and re-fit using a NEW air filter.

13. Start engine. It should run normally if the engine hunts (faltering revs) the air flow sensor is suspect.

14. Change the oil and oil filter. Mil light may be on so code clearing may be required.



Please accept the solution if it's helpful. Do get back to us for any further query.

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What holds homonic balancer in place on 1993 isuzu trooper 6 cyl


1993 3.2l Gas V6 engines, right>? double posted too.
the torque page is clear, read that yet, seem not.
seem 123 is correct, but
2.8L V6, GM
3.1L v6 GM
or 3.3L V6 Isuzu.
as you can see there are 3 , V6 engines.
an not posted yet, even second post.
above poster used 4 cyl engine and is wrong. BILL
25425095-4ecryu1insy4w5lep2vjmo20-4-0.jpg now answered, 2 twice,
before working on any engine, know whats there first.
and win.

Feb 14, 2015 | 1993 Isuzu Trooper

2 Answers

Isuzu V6 sparkplug firing order


gee guy, 3.1L or 3.2L?
you only need 3 things to time the distrib. static.
where is #1, its the most forward cylinder, LOOK carefully.
forward means closest to the cam drive end of engine.
not flywheel end.
rotor rotation direction (crank and watch it)
now the order, 3.2l v6? IS It? the single cam?
1990 trooper v6
answering for only USA car...
our 3.2 has no distrib V6 its DIS.






3.1L V6 USA spec. only. rotor is CCW
25147295-nfvz33lg404rkp0tn3ribhht-4-0.jpg

Sep 27, 2014 | 1990 Isuzu Trooper

1 Answer

Where is the location of camshaft sensor 1998 isuzu trooper


if its diesel 4JX1 its in top cam belt cover cant miss it, sensor is very clearly visible.
if its petrol V6 (6VD1 or 6VE1) its in left head at rear behind inlet manifold
these pictures are for petrol V6, Jackaroo(Trooper) and Holden Rodeo are the same.

stevenhurc_21.jpg



stevenhurc_22.jpg

Apr 10, 2011 | 1998 Isuzu Trooper

1 Answer

Where is the starter on a 1999 isuzu trooper


weather its 4cyl diesel or V6 petrol its on the left side of vehicle, look through wheel arch lift up rubber inner gaurd seal and you will see it. if its a V6 the engine needs supporting while you remove the engine mount to then get the starter motor out.

Feb 22, 2011 | 1999 Isuzu Trooper

1 Answer

Lost power to engine


Check make sure all plugs are firing. Sounds like what my 93 Rodeo was doing-Idled okay but very rough when in gear. Turns out only 5 out of 6 plugs were firing due to a defective ignition module- 100 bucks later it works fine.

Hope this helps.

Mar 20, 2010 | 1992 Isuzu Trooper

3 Answers

Trying to change water pump..where is location..1999 trooper


behind timing cover, i believe it run by the timing belt. do timing belt when replacing waterpump, kind of a big job.

Oct 05, 2009 | 1999 Isuzu Trooper

1 Answer

It will not fire it has a new cap, rotor button, and coil. The timming belt is ok. I have not found a ECU or a crank sensor. Fuses are ok.


the problem is probably in the ignitor by the coil this is a common problem on this model foreign trucks and cars.

Aug 26, 2009 | 1986 Isuzu Trooper

1 Answer

Bighorn 3.2 V6 Petrol - Transmission


does it feel like its in 2 gears at once and dragging. what was the original trans problem(why you changed it)

Aug 24, 2008 | 1993 Isuzu Trooper

Not finding what you are looking for?
1993 Isuzu Trooper Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...