Question about 2004 Ford Taurus

1 Answer

I need a PCM for a 2004 Ford Taurus SES - need a part number but having trouble locating this part. Where can I find my PCM to get the part number.

Posted by on

  • yadayada
    yadayada Sep 27, 2010




1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

The Powertrain Control Module (PCM), also known as the ECU, generally is located on the right side of the passenger footwell behind the kick panel (behind glove box). Remove the kick panel by removing the two large head plastic screws and pull the kick panel out. The PCM will now be visible; it is the silver box with the large connector. Remove the bolt holding the connector to the PCM using a 10mm socket and undo the connector from the PCM. Slide the PCM down and out.

In any side (front or back) you could see any labelwhti the part and serial number. Check the replacement part with your dealer or any junk.

Hope helps.

Posted on Sep 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to replace air condenser on a 2004 Ford Taurus ses dohc

The condenser unfortunately must be replaced from under the car, so the job is best left to a shop with a car lift.

Aug 27, 2016 | 2004 Ford Taurus

1 Answer

How do I replace the shift control pack in transmission of 2001 ford Taurus SES?

Not sure what you mean. This may help. This is on the firewall, above the engine near the top center. Remember; for successful replacement, the same calibration code on the PCM must be used! PCM does control Trans but there are many sensors that feed this processor. Do you have a better description?

Powertrain Control Module (PCM) Removal and Installation
  1. Disconnect the battery ground cable.
  1. Remove the powertrain control module (PCM) electrical connector.

  1. Remove the PCM.
    • Remove the stud bolts.
    • Remove the cover and the PCM.

Sep 18, 2014 | 2001 Ford Taurus

2 Answers

Can't get the starter out of a ford Taurus 2004

either you took out the wrong bolt by the trans.... or the pin is stuck ... give it a whack with a mallet
should of taken out 2 ,13 mm bolts

Jul 28, 2011 | 2008 Ford Taurus X

1 Answer

Replace cabin filter 2004 ford taurus ses 3.0 v6 where is it located at

It is located under the hood on the passenger side. To get to it raise the hood and remove the clips holding on the black plastic cowl cover that runs under the wipers at the top of the firewall. You can remove the passenger side wiper if you want but i've changed the filter without. The filter is located just under this cover on the passenger side .

Feb 19, 2010 | 2004 Ford Taurus

Not finding what you are looking for?
2004 Ford Taurus Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5677 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides