Question about 1985 Chevrolet Camaro

Open Question

Transmission,clicking noise,1st gear only,driveshaft speed.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1998 chevy k1500 4x4 4

first of all your truck is already in first gear when your going down the road....lol

Posted on Mar 06, 2009

csmock132
  • 4669 Answers

SOURCE: Transmission won't shift!

Does it just not shift up to 3rd or when it shifts to 3rd it is just like neutral?

Posted on Mar 06, 2009

  • 975 Answers

SOURCE: transmission stuck in 1st gear on a 87 camaro

If the moudulator (vacuum controlled) is bad it will stay in low,Not sure what tranny,but if it has a vacuum line going to it ,start there,if you pull the vac. line off and fluid drips out ,it's bad.
If a 700r 4 speed ,Pull the cover for the governor (should have a wire clip over it,like a master cyl clip ,kinda) It's just pressed into the housing. A small amount of fluid will leak out. Just grab the governor by the end and pull it out ,The gear on the end is plactic,if it's "applecored" the governor can't work. I've replaced mine a few times.
Oh yea ,check the kickdown cable first,make sure ,if you pull on it ,you can feel the spring pressure aginst it as you get to the end.

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3 speed box in drive 1st and 2nd gear takes 3rd gear dont


How to adjust 3 speed column shifter - YouTube

? 9:53
https://www.youtube.com/watch?v=2TCHzIvAvRQ
Mar 6, 2014 - Uploaded by luke Fugate
This is a video to show you how to adjust a Three speed on the column to ... It's great not having to wind the engine and transmission just to take off in 2nd or 3rd gear. ... It was ALWAYS getting stuck between 1st and 2nd gear. .... 1977 c10 3 On The Tree ' How to Drive a 3 Speed Column Shift - Duration: ...

Diagnose Automatic Transmission

www.aa1car.com/library/2002/bf90222.htm
All they know is that they put their gear selector in "D" for Drive and their vehicle ... But when internal problems cause the transmission to act up, it takes a fair amount .... In Chrysler three-speed automatics, changing the fluid to ATF+3 can also help ...kickdowns to get the transmission to downshift to 1st from 2nd or 3rd gear.

Manual transmission - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Manual_transmission

Wikipedia1 Overview; 2 Unsynchronized transmission; 3 Synchronized transmission; 4 Internals.... gear speeds by blipping the throttle when shifting from 2nd into 1st. ... In a synchromesh gearbox, to correctly match the speed of the gear to that of the ... Even in transmissions that do not feature direct drive, it's an advantage for the ...

When do you use the 1,2,3 gears on an automatic car ...

https://www.reddit.com/.../when_do_you_use_the_123_gears_on_..

Jan 10, 2016 | Cars & Trucks

2 Answers

2003 ford sport trac front grinding noise from drivers side when sharp left turn


go to the magicmechanic website and send him this--hes the best there is and will rply

Jan 19, 2015 | 2003 Ford Explorer Sport Trac

1 Answer

I have a 91 Isuzu pick up manual transmission 5 speed that makes a high whining noise in 1st 2nd and 5th gear. What could this be?


Have you checked the level of gear oil in the transmission? Remove the fill plug and see if oil is up to the hole.

May 13, 2012 | 1991 Isuzu Pickup

1 Answer

REPEATLY worn out carrier bearing on my 2001 GMC Sonoma extended cab ( 4.3 , 4speed auto 2wd) what could be the cause of this even after I've had it rebalanced?


  • If the bearing fails and seizes up, the rubber will be torn away from the bearing. The seized bearing can tear away the rubber mount that supports the outside of it allowing the bearing to rotate with the driveshaft. This allows the driveshaft to wobble up and down causing a vibration.
  • The rubber can also deteriorate due to age or contamination with oil. The driveshaft will operate at the wrong angle and vibration or noise will result. The vibration occurs most often during hard acceleration.
  • A worn center support bearing can cause a whining sound that varies with vehicle speed. The noise is constant in pitch, rather than changing or intermittent like U-joint noise.
  • If the truck has been raised , the alignment of the drive shaft will also change, A damaged driveshaft can exhibit a variety of symptoms. A clunk that is heard when the transmission is shifted into gear is the most obvious. You can also encounter unusual noise, roughness, or vibration.
    NOTE The engine, torque converter and driveshaft change in frequency as rpm changes. A rebuilt torque converter is often the cause of a vibration that is rpm-related.

    To help differentiate a potential drivetrain problem from other common sources of noise or vibration, it is important to note the speed and driving conditions at which the problem occurs. Unfortunately, it is often difficult to accurately pinpoint drivetrain problems with only a road test. Expand the undercar investigation by putting the vehicle up on the lift, where it is possible to get a good view of what is going on underneath.

    • Check the companion flange, carrier bearing, pinion shaft seal, and pinion bearing, transmission's extension housing seal and bushing, and the u-joints.
    • Check the driveshaft for runout, or the amount that a part wobbles up and down or side to side when it is in motion.

Sep 23, 2011 | 2001 GMC Sonoma Extended Cab

1 Answer

My 1999 Chevy Silverado 1500 Z71 makes a clunking noise and feels like it got rear ended if I drive it for an hour or so non stop. It seems to be when it shifts from 1st to 2nd gear. I had the ******...


No one can tell you what it is.This is the operating characteristic of your transmission and customer do object to the noise or clunk and dealer discourage the repair. This is TSB 03-07-29-004G. Let me give you a partial copy. INFORMATION
Bulletin No.: 03-07-29-004G
Date: December 15, 2010
Subject: Manual Transmission Operating Characteristics
Cold Operation
Manual transmission operation will be affected by temperature because the transmission fluid will be thicker when cold. The thicker fluid will increase the amount of force needed to shift the transmission when cold. The likelihood of gear clash will also increase due to the greater time needed for the synchronizer assembly to perform its function. Therefore when the transmission is cold, or before it has reached operating temperature, quick, hard shifts should be avoided to prevent damage to the transmission.
Backlash
Backlash noise is created when changing engine or driveline loading. This can occur when accelerating from a stop, coming to a stop, or applying and releasing the throttle (loading and unloading the driveline). This will vary based on vehicle type, build variations, driver input, vehicle loading, etc. and is created from the necessary clearance between all of the mating gears in the transmission, axle(s) and transfer case (if equipped).
Shift Effort
Shift effort will vary among different style transmissions and synchronizer designs. Usually the more heavy duty the transmission, the higher the shift effort because of the increased mass of the components. Shift effort can also be higher in cold weather because the fluid will be thicker. Medium duty transmissions will not shift as quickly as a Corvette transmission. To reduce shift effort, do not attempt to rush the shift - allow the synchronizers to work as designed. Shifting harder will only increase the chance of rushing past the synchronizer leading to grinding while shifting.
Non-Synchronized Gears
Some light duty truck transmissions in 1st gear (creeper-gear) and reverse gears in various transmissions, along with all gears in some medium duty transmissions, may be non-synchronized. This means there is not a mechanism to match input and output shaft speeds to allow for a smooth shift. This function is left up to the driver. This can be noticed if a shift into 1st or reverse is attempted while the vehicle is rolling or before the input shaft stops rotating leading to a gear grind. The grinding can be reduced by coming to a complete stop and pausing for a moment before shifting into the 1st or reverse gear. Some slight grinding can be expected. In medium duty non-synchronized transmissions, the driver must match input shaft (engine) speed to output shaft (driveshaft) speed with every shift. This can be accomplished by double clutching, or by using other methods. If the driver is not able to perform this function properly, there will be gear grinding with each improperly completed shift. Driver training may be required to correct this condition. Clutch brakes are used in medium duty non-synchronized transmissions to allow a shift into gear at a stop. The clutch brake is used to stop the input shaft from spinning, allowing a shift into gear at a stop without grinding. The clutch brake is activated by pressing the clutch pedal all the way to the floor. When the clutch brake is used, it is possible to have a blocked shift with the vehicle stationary. If this occurs, engage the clutch slightly to rotate the input gear to allow the shift. The clutch brake is intended to only be used while at a stop. Care must be taken to not activate the clutch brake while shifting between gears. This could lead to excessive grinding or a blocked or missed shift.

Aug 29, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I have a 1997 manual transmission jeep wrangler and i need to know why i have a vibration in 1st.gear and reverse


vibrations in first, or rev gear, and lessons as speed increases, check all ujionts on front and rear driveshafts, even front axle shaft ujionts, rear driveshaft is at max angle on these units, a bad ujiont will give clink sound, or sreech sound, make sure shafts are not bent. I assume there is no vibs in nuetral, engine running, also check all mounts. GOOD LUCK. RDJRP.

Jun 30, 2010 | 2008 Jeep Wrangler

2 Answers

Ford transmission wines in 1st 2nd 3rd revers, no


It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings.

Apr 16, 2010 | 1995 Ford Aerostar

1 Answer

Whining noise when engaging 1st or reverse.


i had a nissan pickup that would whine in all gears except 4th...it started out with 1st then reverse then went to the rest...solution was new transmission...or rebuild cause the syncronizers or the gears them selves are being chewed up...the new transmission was cheaper then a rebuild. or take it to somewhere that will do free diag on the transmission.

Mar 29, 2009 | 1996 Nissan Pickup

2 Answers

Gear change vibration


These cars usually have a two piece drive shaft. There is a center bearing in the middle of the driveshaft for support and dampen vibration. It could also be the front rubber coupling where the transmission tailshaft and driveshaft meet. If both are fine try loosening the bolts on the rear transmission mount. Your mounts may be out of alignment allowing for unusual angles between the transmission and driveshaft. Good luck.

Aug 04, 2008 | 2003 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...