Question about Dodge Intrepid

1 Answer

My 2001 intrepid won't start. put in oil pressure sensor and new spark plugs, new coils,new crank sensor, new fuel pump i had the starter checked and the battery and the alternator they were good

Posted by on

  • torresmildre Sep 28, 2010

    the engine is not turning over

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

Could you tell me exactly what is happening when you say that the car wont start?

Is the engine not turning over or is it not firing, or trying to run?

Let me know then I can try to narrow this down for you.

Thanks

Jason

Posted on Sep 27, 2010

  • Jason Maurirere
    Jason Maurirere Sep 29, 2010

    Ok,

    It sounds like you may have a problem with the ignition switch circut.
    Check you have power to the small starter terminal if not then check you have power to the starter relay from the ignition switch.
    If nothing then check that your ignition switch is working properly.

    Let me know if you need more information.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 2003 ford focus se.sounds like it wants to start but wont.is that my fuel pump?


If you open your fuel cap and have someone turn the ignition on you should hear a buzzing noise in the gas tank for two seconds. That's your fuel pump. Also go to the pressure regulator under the hood, access the pressure tester valve, press on the valve and have someone crank the engine for one second. You should get gas coming out.

May 29, 2011 | 2003 Ford Focus

2 Answers

Wont start it cranks but nothing happens.wont turn over. put a new what you would call distributor. still nothing.


If the Starter isn't turning the engine over, but you hear a clicking sound, you may have a bad Starter.
If the Starter is turning the engine over, but you are getting no Spark, you may have a failed Camshaft or Crankshaft Position Sensor, or your Timing Belt may have jumped or broken(common on the neons).
If the Starter is turning the engine over, but you are getting Spark, you may have a failed fuel pump, fuel pump relay, or fuel pressure regulator.

Before you start replacing sensor, double check the Timing belt to ensure it hasn't broken or jumped, and check to see if you are getting a spark or not.

Mar 12, 2011 | 2003 Dodge Neon

1 Answer

2001 windstar wont crank with ignition jump starter it will crank but not start


Check if spark is comeing from your coil,,,than from coil to tops of spark plugs, If it is getting spark check your fuel pressure on the fuel pump,,,,,,If this is a high miler well this is what happens

Mar 11, 2011 | 2001 Ford Windstar

1 Answer

Crank, won't start problem. I checked the spark plugs on Jeep 98. Looks good. Could it be the crank sensor or starter coil?


Yes it is very much possible.But there are many other possibilities too,including starter and spark plugs issue.

If your engine cranks normally but will not start because it has no spark, or it stalls and won't restart because it has no spark.

You can also do a test to confirm the problem .The procedure to do the test is as follows:---

If your engine has spark plug wires, disconnect one of the plug wires from a spark plug and place the end of the wire near a metal surface on the engine. Then insert a small Phillips screwdriver into the end of the wire (the plug boot), or a small bolt or nail to provide a conductive path. Then crank the engine and look for a spark to jump from the screwdriver, bolt or nail in the end of the plug wire to the engine. If you do not see a spark, there is an ignition problem.

OR-----------

If your engine has a coil-on-plug ignition system with no plug wires, In that case remove one of the coils from the spark plug and insert an old spark plug, a spark plug tester or a screwdriver into the end of the coil. Ground the spark plug or plug tester to the engine, then crank the engine and look for a spark. No spark indicates an ignition problem.If the engine has no spark, check for voltage at the coil positive terminal when the ignition key is on. If NO voltage, then problem is on the trigger side of the coil (pickup, crank sensor, ignition module or primary wiring circuit).

But If there is NO voltage at the coil itself, then in that case the problem is on the supply side (the ignition switch or ignition wiring circuit).-----------------

Jeep cranks but no start:----------------

A jeep that cranks over but doesn't start, in many cases will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also these problems are related to faulty spark plug. Check the spark at spark plugs when you start the jeep. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt. If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced. If all the possible options checked out ok then check the car starter. The starter gets power from battery to start the jeep. If the starter is faulty then it will not let the car to start. Also check and confirm that there is fuel in the jeep. If its very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the jeep. If the car starts momentarily, then there's a good chance the fuel pump is not working or the jeep is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gauge and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem. Thanks. Helpmech.

Jan 07, 2011 | Jeep Cherokee Cars & Trucks

2 Answers

The car suddenl wont turn over. It has a brand new starter & the battery is fine but it wont turn over.


This will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also this problems are related to faulty spark plug. Check the spark at spark plugs when you start the car. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt.If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced.Also check and confirm that there is fuel in the car. If its very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the car. If the car starts momentarily, then there's a good chance the fuel pump is not working or the car is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gauge and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem.Thanks.Helpmech.

Nov 15, 2010 | 2001 Chevrolet Blazer

1 Answer

2001 saturn dies after it starts.restart it and dies ,


A car that starts over but doesn't start and dies , in many cases this problem will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also this problems are related to faulty spark plug. Check the spark at spark plugs when you start the car. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt.If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced.If all the possible options checked out ok then check the car starter. The starter gets power from battery to start the care. If the starter is faulty then it will not let the car to start. Also check and confirm that there is fuel in the car. If it very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the car. If the car starts momentarily, then there's a good chance the fuel pump is not working or the car is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gage and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem.Thanks.Helpmech.

Nov 15, 2010 | 2001 Saturn SC

2 Answers

Car not starting it cranks like it is out of gas


The first thing i would do is try to spray the throtlebody with starting fluid and see if it starts up for a few seconds, if it does then we know its fuel and the most common problem with these trucks would be the fuelpump, this sounds like it may need to be replaced, there are problems with the wir connector to pump module , this should be replaced when replacing the pump, this is located inside the fuel tank, the tank will need to be removed to install new pump asm, heres a picture to help you understand what im talking about.

Oct 31, 2010 | 2001 GMC Jimmy

1 Answer

My 1994 park ave, sometimes it starts, sometimes it wont, it does not matter if is is hot or cold, when it is running it runs smooth like there's nothing wrong. I replaced most of the fuel system, spark...


You have three choices. First, check the spark and coil system to ensure you are getting a spark. Pull off a plug wire from the coil pack and crank. Have someone watch to see sparks snapping off the coil pack. If you don't have any replace the control module under the coil packs.

Second, you may not be getting enough fuel pressure. Put a gauge on the fuel pressure test port. You may have a bad oil pressure sensor, located down above the oil filter. Check that oil pressure sender and make sure the connector is pushed in. The power to the fuel pump runs through the oil sender. If the engine starts and oil pressure doesn't come up quickly, the computer will shut off the fuel pump. Check this and you can also manually engage the fuel pump from the relay block down by the passenger feet.

Third choice, and it's a long shot, check the harmonic balancer and the crank position sensor. If the sensor is bad, the computer has no idea when to fire the spark plugs. A magnet is on the harmonic balancer and flys by a sensor to induce a voltage in the coil and tell the computer what position the crank is in.

You also may have a bad computer.

You can figure it out.

Oct 27, 2010 | 1994 Buick Park Avenue

1 Answer

Car will not roll over in park...starts occassionally then dies within a few seconds, cranks fine...just will not turn over. Purchased new battery, too.


Most probably its a low fuel pressure related problem.Get the fuel pressure checked.If its low then this is faulty fuel pump and clogged fuel filter issue.the other possibilities are,-----

A car that cranks over but doesn't start, in many cases will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also this problems are related to faulty spark plug. Check the spark at spark plugs when you start the car. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt.If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced.If all the possible options checked out ok then check the car starter. The starter gets power from battery to start the care. If the starter is faulty then it will not let the car to start. Also check and confirm that there is fuel in the car. If it very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the car. If the car starts momentarily, then there's a good chance the fuel pump is not working or the car is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gage and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem.Thanks.Helpmech.

Aug 24, 2010 | 1998 Toyota Corolla

1 Answer

01 Dodge Intrepid with 2.7l V6 turns over but won't start. Mechanic believes timing jumped adn advised motor is done...not worth fixing. Is this True? Can timing be reset? Scantool does not indicate...


The coils only power up during cranking check that first. If it sounds funny cranking,ie. cranks faster or slower than usual,then he's probably right about the timing belt. If it jumped the heads need to be replaced or rebuilt,both costly. Would be cheaper to put a used engine in.

Jul 14, 2009 | 2001 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...