Question about 2002 Hyundai Accent

Open Question

I have a 2001 Hyundai Accent and errors P0722 and subsequent P0733 and P0734 are showing. The Hyundai Dealer is quoting $375 to replace the Pulse Generator Sensor at the gearbox, along with $500 for a transmission service. The car has done 80K and it is a 1.8L. My question is, it seems that through my experience with other cars (admittedly not Hyundai's), that these prices are quite excessive. I've done my research and the pulse generator sensor does not seem all that expensive. Can anyone enlighten me as to why these prices are so high?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 65 Answers

SOURCE: Hyundai 2001 Accent Code - P0130

I think this is the O2 sensor - It will run fine but you might notice your gas mileage slipping and will not pass emissions.

Posted on Aug 07, 2008

polarcycle
  • 1392 Answers

SOURCE: 98 Intrepid Gone into "Limp Mode"

There are some sensors on the transmission that tend to go bad. You may also need to check the wiring. Could be a computer problem. How many miles?

Posted on Mar 06, 2009

  • 4 Answers

SOURCE: tranny does not shift out of O/D and starting out in 2nd gear.

Same situation, Solenoids in the Transmission were throwing the codes, Lost O/D and had transmission replaced. No signs of problems after check engine light came on for close to 1000 miles later.

Posted on Aug 21, 2009

wracefans24
  • 1985 Answers

SOURCE: '99 Concorde won't shift into third.

all the codes listed above are saying incorrect ratio for each gear,you should take this to a dealer he can determine which faulty sensor on the transmission is causing this,it is not a internal transmission problem

Posted on Dec 25, 2009

wracefans24
  • 1985 Answers

SOURCE: 2001 Jeep Grand Cherokee won't shift out of first

P0733=Gear 3 Incorrect Ratio
P0734=Gear 4 Incorrect Ratio,
your transmission is in "limp" mode,
Have the following sensors checked on the transmission,input sensor,output sensor,and speed sensor.
The transmission is not getting a signal from one of them,So it doesn't know how fast your going so it doesn't up shift.

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Hyundai accent 05 codes are p0732,p0733, p0734 how do infix it?


Not sure but by the looks of the numbers and the fact they are sequential my guess would be a misfire in cylinders 2,3, & 4.

Aug 24, 2014 | Cars & Trucks

2 Answers

P0734 hyundai


Why did he or she say this?? Did he or she do the diagnostics for the fault codes or did they just guess??

Mar 22, 2014 | Hyundai Motor 2004 Accent

1 Answer

2001 Hyundai Accent Output shaft speed sensor


output shaft speed sensor on top transmission. just depress the release tab disconnect electrical connector then remove output shaft sensor bolt.remove sensor.

Jul 15, 2013 | 2001 Hyundai Accent

1 Answer

I own a 2000 Hyundai accent the codes came up with P0717, P0734, P0732,P0108. Please help


Sorry to tell you that it is incorrect gear ratio codes. Must replace the transmission.

Mar 14, 2013 | 2001 Hyundai Accent

1 Answer

Hi, i have a problem with my car, hyundai accent 2001 - the problems are P0722, P1529, P1805, P1801 - can you help me understand what they mean?



Trouble Code: P0722

A/T Pulse Generator 'B' Sensor Circuit Malfunction
Possible Causes:


Pulse generator 'B' (+) or (-) circuit is open or shorted to ground . Pulse generator 'B' is damaged or has failed. TCM has failed . TSB 01-40-006-1 (12/01) contains information about this code.


Trouble Code: P01529

Customer Snapshot Request Error
Possible Causes:


Transmission control module error. Check for trouble codes in the transmission control module. TSB 1-40-005 (3/01) contains information about this code. I have info. on these 2 codes,will search more for the others.

Aug 15, 2012 | 2000 Hyundai Accent

1 Answer

I Have A 2000 Hyundai Accent And The Codes P1529 and P0722 Came Up. What Does This Mean. Please Help Me Out.


P1529 - MIL light request

P0722 - Transmission Pulse Generator B. The Pulse Generator detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. The pulse signal is sent to the Transmission Control Module (TCM) which converts it into vehicle speed. The code is detected when the Pulse Generator B failed to provide a signal to the TCM upon initial movement of vehicle.

Symptoms:
- Engine Light On (or Service Engine Soon Warning Light)
- Speedometer improper reading
- Possible shifting problems

Possible Causes:
- Pulse Generator B harness or connectors
- Pulse Generator B circuit is open or shorted
- Pulse Generator B

Jan 15, 2011 | 2002 Hyundai Accent

1 Answer

No tenago dinero y mi carro hyundai 2004 me esta dando problemas no coje la riversa y cambia de cantaso y le pusieren la maquina y me *** estos codigos p2o96,p0734,p0733,p1709,p2096


P0733 - Gear 3 Incorrect ratio
P0734 - Gear 4 Incorrect ratio
P1709 - Park or Neutral Position Switch out of Self-Test Range
Check out this TSB 03-40-016

Some 2000-2002 ACCENT vehicles may experience the following conditions: Diagnostic Trouble Code (DTC) P0722: No pulse generator-B signal Third-gear "Fail-Safe" condition
"Check Engine" light on

If the vehicle experiences the above symptoms: Inspect the pulse generator-B and replace if necessary.
Reprogram the TCM using the Hi-Scan Pro

VEHICLES AFFECTED: Model: 2000-2002 Accent vehicles with automatic transmissions
Affected vehicle production date range:
3 DR: Produced through October 11, 2002
4 DR: Produced through September 3, 2002

Affected vehicle identification number (VIN) range:
3 DR: Produced through KMHCF35C63U235415
4 DR: Produced through KMHCG45C03U412818

The problem is you will have to take it to the dealer to get the reprogram done.


P2096 - Fuel trim too lean. Usually means vacuum leak. Look for crushed, broken or melted off vacuum hoses near intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all vacuum hoses, intake manifold, EGR valve see if idle raises if so you found leak. Repair. Could also be bad oxygen sensor switching bad O2 sensor but rarely.


Hope this helps!

Sep 21, 2010 | Hyundai Motor 2004 Accent

1 Answer

Have a 2001 tiburon showing engine light went to auto zone had codes p1624 p0733 p0734 p1624 bblow cooling fan relay cicuit fault probable cause BB1open or short circuit condition BB2 poor electrical...


Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Sep 26, 2009 | 2001 Hyundai Tiburon

1 Answer

Tranny does not shift out of O/D and starting out in 2nd gear.


Same situation, Solenoids in the Transmission were throwing the codes, Lost O/D and had transmission replaced. No signs of problems after check engine light came on for close to 1000 miles later.

Aug 21, 2009 | 2000 Hyundai Elantra

1 Answer

Chrysler Neon auto gearbox problems


P0733 IS GEAR RATIO ERROR IN 3RD AND P0734 IS GEAR RATIO ERROR IN 4TH..THESE CODES USUALLY MEAN AN INTERNAL PROBLEM IN TRANSMISSION,BUT CHECK WIRES AT SPEED SENSOR CONNECTORS FOR BROKEN WIRES BY PULLING ON WIRES AND WIRING NEAR SOLENOID PACK FOR CHAFING..I HOPE THIS HELPS..YOU MIGHT WANT TO DROP THE TRANS PAN AND LOOK FOR A PLUGGED FILTER OR DEBRIS IN PAN..MAKE SURE THE TRANS COOLER IN RAD HAS NOT FAILED ALSO

Aug 14, 2009 | Chrysler Neon Cars & Trucks

Not finding what you are looking for?
2002 Hyundai Accent Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...