Question about 1987 Dodge Aries

1 Answer

No brake on rear whelles.No fluid or air can be gotten at the bleed value

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 662 Answers

One of 2 things, there is either a blockage in the rear line, or the master cylinder is faulty.

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brakes went out,master cylinder is dry. filled the master cylinder pumped brakes and bled rear drivers side


    If there is a substantial fluid eruption, there are air bubbles still trapped in the system. You must repeat the bleeding procedure to remove that air. A modest disturbance in the fluid returning to the reservoir indicates a properly bled brakesystem.

    How To: Bleed Your Brakes - Feature - Car and Driver

    www.caranddriver.com/.../how-to-bleed-your-brakes-feature Car and Driver
Feedback

How To: Bleed Your Brakes - Feature - Car and Driver

www.caranddriver.com > Features

Car and DriverIf there is a substantial fluid eruption, there are air bubbles still trapped in the system. You must repeat the bleeding procedure to remove that air. A modest disturbance in the fluid returning to the reservoir indicates a properly bled brake system.

How to Bleed Brakes - Tips on Bleeding Brakes

Jan 01, 2016 | Cars & Trucks

1 Answer

I changed out left rear hub assembly on a 2010


The proportioning valve has blocked off your rears brakes from getting fluid. My suggestion is to by a syringe 50cc 2oz size fill with brake fluid and force fluid backwards to master cylinder this should center the valve and remove the air.

Sep 01, 2014 | Cars & Trucks

2 Answers

On my 78' Chevrolet c60 my brakes are going to the floor. I keep bleeding them and the air goes right back in as fast as I can get it out. If it sits it will leak all the fluid out. But the fluid is...


its obvously draging air in from somewere so to start with replace the bleeder valve under the hood, top up fluid bleed again.have somebody slowly pump the brakes then check all pipes and joints,hoses for sighns of leaks, if you find a leak that is the most likely spot were air is entering the system.

Sep 06, 2011 | Chevrolet Chevy Cars & Trucks

2 Answers

I have a 2004 Land cruiser and changed the right rear brake cyl and brake shoes . What is the proper procedure to bleed the rear brake system. Thank you for your help.


  1. Check the fluid level in the reservoir after bleeding each wheel. Add DOT3 fluid, if necessary.
  2. If the master cylinder was disassembled or if the reservoir becomes empty, bleed the air from the master cylinder as follows:
    1. Disconnect the brake lines from the master cylinder.
    2. Slowly depress the brake pedal and hold it.
    3. Block off the outlet plug with your finger, and release the brake pedal.
    4. Repeat 3 or 4 times.

  3. Bleed the brake starting with the one furthest from the reservoir and then the next furthest, etc.
  4. Depress the brake pedal several times, then loosen the bleeder plug with the pedal held down.
  5. At the point when fluid stops coming out, tighten the bleeder plug to 11 Nm (8 ft. lbs.), then release the brake pedal.
  6. Repeat until all the air in the fluid has been bled out.
  7. Repeat the procedure to bleed the air out of brake line for each wheel.
  8. Check the fluid level and add DOT3 fluid if necessary.

Aug 07, 2011 | 2004 Toyota Land Cruiser

2 Answers

The brake cylinder in the right rear tire started leaking. I changed it and bled the brakes., now they won't stop and will go all the way to the floor. where and how do I adjust them? THANK YOU jOE!


You may need to further bleed the brakes. Something pumping to bleed the brakes can **** in air at the brake fluid reservoir. Try using a vacuum pump to **** out brake fluid from the release screw at the brake side. Make sure you always have enough fluid at the reservoir.

Feb 28, 2011 | Chevrolet Caprice Cars & Trucks

2 Answers

Changed out the master cylinder on my 1978 chevy scottsdale. filled it with brake fluid. now I have no brake pressure at all. what did i do wrong?


Gotta bleed it. It's been written up a thousand times, google "how bleed brakes" and you're set for a little studying.

If you have trouble freeing the bleeder fittings, try: a 3/8" impact, set it very low and let it tap away. Sometimes they'll turn after a couple of minutes of steady application of the impact. If you don't have an impact and you fear breaking the fitting, grab it with a little pair of Vise-grips and tap the vise-grip handle in the proper direction. Just keep tapping, it can take a few minutes. Clamp the pliers on tightly, don't let them slip- they'll really eat that little bleeder quick if you let them slip.

Don't mess around with junk locking pliers from the exotic Orient, they are pretty much without value. The only Vise-grips worth owning is the originals, and the 5" version is incredibly useful for things like breaking the little brake bleeder fittings loose.

lp

Jan 15, 2011 | 1978 Chevrolet C1500

1 Answer

Replaced L/F caliper and rear brake line feeding rear brakes. Scanner will not recognize ABS system. Need to bleed brakes and cannot do it manually. 1996 Chevrolet 3500 series/ diesel/ 2wd.


if air has gotten in the abs unit you will need a scanner capable of running pump to bleed out. for starters do a gravity bleed by opening bleeder at caliper to get most air out of system keep it open until fluid drips out and do same at rear. be sure resevoir stays full.

Dec 13, 2010 | 1996 Chevrolet C/K 3500

1 Answer

How to bleed brakes on 2002 toyota sienna


Here is the procedure from the service manual. I would add just one thing. Do each wheel in this order

  1. right rear wheel
  2. left rear wheel
  3. right front wheel
  4. left front wheel
BLEEDING

HINT: If any work is done on the brake system or if air in the brake lines is suspected, bleed the air from the system.

NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.


a)FILL BRAKE RESERVOIR WITH BRAKE FLUID Fluid:SAE J1703 or FMVSS No. 116 DOT3

b)BLEED MASTER CYLINDER HINT: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder.

c)Disconnect the brake lines from the master cylinder. SST 09023-00100 Slowly depress the brake pedal and hold it.

Block off the outlet plug with your finger and release the brake pedal.
Repeat (b) and (c) 3 or 4 times.


BLEED BRAKE LINE

1. Connect the vinyl tube to the caliper or wheel cylinder bleeder plug.
2. Depress the brake pedal several times, then loosen the bleeder plug with the pedal held down.
3. At the point when fluid stops coming out, tighten the bleeder plug, then release the brake pedal. Torque: (Bleeder plug) Front brake caliper
: 8.3 Nm (85 kgf-cm, 74 inch lbs.) Rear wheel cylinder: 8.5 Nm (87 kgf-cm, 75 inch lbs.)
4. Repeat (b) and (c) until all the air in the fluid has been bled out.
5. Repeat the above procedure to bleed the air out of the brake line for each wheel.

CHECK FLUID LEVEL IN RESERVOIR Check the fluid level and add fluid if necessary. Fluid: SAE J1703 or FMVSS No. 116 DOT3

Jun 25, 2010 | 2002 Toyota Sienna

2 Answers

I need to know how to bleed the brakes on a 1999 chevy blazer


Start from right rear, then, left rear, right front, left front. Fill master cylinder. Have helper sit in car, have helper hold brake pedal down. open bleed screw. fluid and air comes out. close screw. release brake pedal. Continue until no air comes out. Move to next wheel. Keep an eye on master cylinder fluid level after each wheel.

Mar 27, 2009 | 1999 Chevrolet Blazer

1 Answer

Brake pad replacement


You will need to bleed all four corners, starting at the right rear, then left rear, then right front, then left front. Your bleed procedure always goes from the wheel farthest from the master cylinder, to the closest. By bleeding only the rear brakes, you've gotten air out back there, but not necessarily any air that might have moved farther forward. Bleed your rears again, and then move forward to bleed the fronts, and see if that helps.

Aug 31, 2008 | 2003 Audi A4 Cabriolet

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...