Question about 1995 Toyota Camry

1 Answer

Replacement of Inside drivre side door handle

Can you please provide the step by step instruction to replace the handle.

Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 359 Answers

Remove the plugs in the the handle. (the part that you hold to close the door),then unscrew should be 2 large phillips heads. remove window winder if not electric, remove plastic cover around door release handle. remove inner mirror trim. then remove door trim carefullly pull it towards you it should pop out every couple of inches around the edge. remove inner plastic .then remove handle from door and from metal rod should be a plastic locking clip just pop it too the side. fit new handle then reverse these instructions.

Posted on May 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to replace the exterior door handle,both sides,on a 1992 Chevy S10 pick up. Is there an on line illustrated manual I can download or copy? I will need step by step instructions. Illustrated step by...


remove seat belt bolts and pull it out. the rest is just held in with tabs.

..or if you want Forget taking the door apart - just remove the two bolts holding the latch assembly to the door - Pull the latch assembly out far enough to see the pin that goes through the broken handle - drive the pin out far enough to remove the handle - insert new handle that you just removed from the replacement latch assembly - drive pin back in - Throw the rest of the replacement kit away since all that was broken was a tab on the handle you just replaced.

hope this helps a lot. :)

Feb 13, 2010 | 1992 Chevrolet S-10

1 Answer

I need to replace LR (driver side) exterior door handle assembly on my Honda Odyssey 2000. I found a source for part but need replacement instruction. Can you help? Thanks, Ed


Have to take off inner door panel and all parts then u will gain access to inside of door remove all linkages and remove bolts from door handle and install in reverse order.

Oct 20, 2009 | 2000 Honda Odyssey

1 Answer

How to replace a 2003 grand vitara's rear door handle


1. open the rear door
2. open the rear door sidings
3. try loosing the not of the handle
4. remove the steel wirings of the handle
5. install the new rear door handle

Jul 15, 2009 | 2003 Suzuki Vitara

2 Answers

Replace outside door handle


Your going to have to remove the inside door panel to get to the two screws that hold the door handle in place. Just make sure your windows are up so the window is not in the way to get to the two screws to un bolt the out side door handle. You can buy the replacement door handle from Auto Zone and buy extra door clips, since they always break. Auto Zone will have the step by step instructions to get the job done and it should take just under an hour, some band aids will be handy too. Good luck and hope this helps, keep me posted, be glad to help.

Jun 22, 2009 | 2000 GMC New Sierra 1500

1 Answer

PASSENGER MIRROR


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 22, 2009 | 1998 Plymouth Breeze

1 Answer

Diagram for replacing exterior door handles


ok. first u remove the door panel(s), with the window rolled up, u will be able to see the back side of the exterior door handle. there will be three bolts, they are size 10metric. there is also a rod attached to the handle held in place by a plastic clip, remove the rod, then remove the three bolts. from the outside remove the exterior door handle being careful not to scratch painted surface. Repeat for the other door(s). Repeat this for installation.

Dec 14, 2008 | 1997 Toyota Camry

1 Answer

Steps involved with repair


i believe there are only 2 - 10mm head nuts holding it in. bring long-nosed pliers, there's a spring clip and it's close quarters in there.

Nov 22, 2008 | 1990 Chevrolet Astro Extended

5 Answers

2006 Ford Fusion inside door handle stopped working


The plastic door handle is broken.
You will need to get a replacement door handle.
Go to http://www.flickr.com/photos/gtppilot/sets...57607539089979/
This should help. It is a set of photographs and instructions to do the job of replacing the handle.

Good luck.

Rgrdrake

Nov 11, 2008 | 2006 Ford Fusion

1 Answer

How to unscrew the outside door handle ?


There should be a set of fasteners holding the handle in place, probably 2 nuts or more. Use a light to see inside the door handle area to examine the fasteners. Having a replacement part will also help, sometimes it has instructions. At the least you can see the entire handle part and understand how it's mounted in the door.

Aug 08, 2008 | 1998 Toyota Camry

1 Answer

2033 kia sedona sliding outer door handle


take inside door pannel of,gently remove plastic sheet,and you will see door handle,un clipdoor lever and nuts,

Jul 12, 2008 | 2003 Kia Sedona

Not finding what you are looking for?
1995 Toyota Camry Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...