Question about Nissan Altima
I will look into this and let you know shortly.
Posted on Sep 28, 2010
What wiring diagram do you need, the stereo or the main wiring harness?
Posted on Sep 27, 2010
What'a ya wanta wire the whole car? If you do you need more room than I can give you here but alldata will sell you everthing you need and everything you can think of to help you find the problem to you car for 10 bucks for the whole month Make sure that you identify your car correctly when orderinf though as t5he wrong one is excatly that. The manuals that you get at the parts store for around 15 bucks cover more model years than just yours and you can get confused easy. If your not used to working with car wiring diagrams the alldata system will even teach you how to read them and how to isolate a problem and how to test devices and everythjing you could possibly ask. Or just ask me what your trying to get working right as I have alldata and can tell you how to check and what to check and wher to look for it at.
Posted on Sep 27, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 Nissan altima alternator
You can go to your local Library, they usually have automotive manuals (Chiltons, Haynes, etc.) that you can check out. Or, you can purchase these at your local auto parts store $10-$20. They are very useful to have on hand and provide decent photos.
Posted on Aug 21, 2008
SOURCE: Need an ecu wiring diagram
what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.
Posted on Sep 01, 2008
yes u can and here is the procedure.
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
Posted on Jun 12, 2009
Tips for a great answer:
Jan 21, 2016 | Nissan Cars & Trucks
May 01, 2014 | 2007 Nissan Altima 3.5 Sedan
Jun 28, 2012 | 1999 Nissan Altima
Oct 07, 2010 | 2003 Nissan Altima
Mar 17, 2010 | 2003 Nissan Altima
Mar 06, 2010 | 2003 Nissan Altima
Feb 10, 2010 | 2003 Nissan Altima
Oct 03, 2009 | 2003 Nissan Altima
478 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: