Question about 1995 Toyota MR2

2 Answers

Toyota mr2 1995

Hi there,am having a problem with water falling down the bonnet vents,straight onto the alternator,therefore,seizing the bearing in the alternator,is there anything out there,i can buy,like a plate to cover the alternator,or something.

Posted by on

  • mama kass May 29, 2008

    thanks for the reply,but will look for another solution,keep up the good work you are all doing.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The best way is to fit the vented engine cover from the turbo or import version,that has small louvres on each of the slots to prevent water ingress.DONT block off any of the vents or you risk overheating the engine bay.

Posted on Mar 08, 2009

Haven't heard of such a thing as yet. Have you tried blocking the vent from underneath

Posted on May 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt is seized. its not the alternator or tension pulley. car turns over and runs but squeals and starts to burn the belt. 1990 geo prizm. is there a common pulley that goes bad?


so easy
one off those pulleys
is seized.fact

Turn them ALL by hand, engine off (not crank)
if its tight? its bad. if loose as a goose,flopping about its bad
there is no COMMON
bearing fail on all old cars, no bearings here last life of engine,not one. there may be an.idler bearing there and bad...
no engine stated,
4AFE toyota or 7aFE,
why not get mechanic to fix it, and not guess.
like the 99.9% do. today.

a good bearing new ,above
feels like a stick in warm butter its good
if you can feel non rotation turning play ,its bad/
play end to end or rocking is bad.
if feels rough its bad.
if wont turn, gee, must I answer that?
if spins super easy that is ok on used bearings.
but not other bad examples.
how is that on bearings 101
if you and gone to Timken bearings web site
it shows and tells every bearing failure seen
in 100 years, all there,
and how to not to wreck them installed.

Jan 31, 2017 | Geo Cars & Trucks

1 Answer

Remove and replace waterpump on 88 mod petrol jackaroo


see if you can turn the pump shaft by hand (hub at the end of the shaft. If you can then the pump may be ok. check for idler pulley seized . Any item with bearings that spins easily will be ok. Check that the power steering pump turns by hand.
Pumps will not seize if they are not turning.water pump bearings will produce a deep grumbling rattly noise when idling if they are failing.

Dec 31, 2014 | Cars & Trucks

1 Answer

Loud metal to metal coming engine


Hi there.
You havent giving us much to go on but you say metal to metal from engine? that could be fan blades hitting radiator or water pump problem or alternator problem[bearing worn] there s a lot of things under the bonnet so could you please give me more info.

May 22, 2014 | 2003 Renault Megane

1 Answer

2001 Toyota Tacoma, is a flood truck in Galena, AK. Alternator won't charge battery, radio won't turn on and fan for defrost/heat won't operate. I have checked the fuses and all are good. I think all...


As the alternator is connected directly to the battery via the cable and the car was under water(flooded) the internals of the alternator will be corroded so a new alternator would be in order. The radio will have water in it so a new radio will be in order.. the fan motor is pprobably seized due to rust in the bearings so see if you cam move the fan manually. If it is stiff the again a new fan will be in order..

Oct 24, 2013 | Cars & Trucks

1 Answer

Battery light and abs light on hard to steer overheating


sounds like you either lost your fan belt, or you have a seized up alternator, or belt tensioner. The fan belt [ drive belt ] turns the alternator to charge the battery, the power steering pump to make easy steering , and the water pump cooling your engine. Do you smell rubber burning? hear a squealing noise? or rattling noise. Open your engine bonnet, start the car up, and look at the drive belt and pulleys. They should all be turning. If this is the problem you will see something seized up. Also if you have let the power steering pump run out of oil, it may also be seized. Good luck with it

Jan 01, 2013 | Hyundai Cars & Trucks

1 Answer

Hi, Coolent puddle was formed under the bonnet after driving for straight 70kms. Overflow bottle was full and noises of boiling could be heard.Dont know what the problem is. Thanks


FIRST CHECK FOR LEAKS ON BLOCK THEN HOSES OR RADIATOR. THEN IF NOTHING FOUND RUN VEHICLE TO OPERATING TENP WATCH FOR EXCESS WATER OR MOISTER OUT TAIL PIPE.IF NOTHING FOUND CHECK THERMOSTAT,CHECK FOR FLOW IN RADIATOR

Dec 25, 2010 | 1997 Toyota Camry

1 Answer

Do not know what an alternator bearing is


An alternator bearing is inside the alternatorand can only be gotten at by taking the alternator apart. You don't say which pulleys are shaking but it is quite possible that they are the cause of your noise. They have been wearing for some time and now have gotten to the stage where they are getting noisy and very near the end of their life. With the engine shut off grab the offending pulleys and try to move them up and down or sideways. If there is any movement, and don't be shy when you try, they need to be replaced before they seize up. From noisy bearing to seize up can happen very quickly so get this looked at right away. Hope this helps.

Dec 27, 2009 | 1997 Cadillac DeVille

2 Answers

95 Toyota Rav4 - How do I replace/inspect/lube alternator noisy


To answer your question straight forward - You don't.

Just replace the unit as the bearing is beyond help if it is making noise.

Jun 08, 2009 | 1996 Toyota RAV4

3 Answers

Rattling noise from front near alternator


Hi.
I think the problem is the power take off for the front fan ,steering etc. Underneath the middle of the car you will see what looks like a small propshaft pointing towards the front with a doughnut shapped mounting bolted to each end. These rubber joints wear and rattle on tick over or low revs cost is about £40 for the 2 from Japarts
Takes about 2 hours to change.Hope this helps Good luck

May 01, 2009 | 1995 Toyota Previa

1 Answer

Sqealing under the bonnet 94 trooper


Take a look at the water pump bearing

Mar 01, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
1995 Toyota MR2 Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...