Question about 1989 Nissan Pulsar

2 Answers

89 Pulsar Headlight

I have just had a headlight globe go on me,how do I replace it? I cant get at the globe from the back, do I need to remove the headlight cover? If so after removing the 3 clips what else do I need to do?

Posted by on

2 Answers

If its the same as a 1991.
Lift the windsceen washer bottle our of its clip.
Pull the connector from the back of the globe.
Unscrew the 2" round plastic finned retainer ring.
Pull the rubber boot off of the back of the globe.
Sqweese the two wire globe retainers together and pull.
Remove the globe.

Posted on Jun 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 359 Answers

You need to replace it from the back, if its not accessable try removing afew things if not remove the entire headlight as it must be fitted from the back.

Posted on May 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace headlight globes on mr2 sw20?


Turn headlights to on. Then 2 clicks back to turns lighs off but keep headlights up/open.

Remove headlight shrouds, (Black plastics.) Use phillips + head screw driver.

Remove chrome trim ring using phillips head screw driver.

Pull out headlight bulb. Disconnect from harness.

Reverse to install.

Sep 12, 2014 | 1991 Toyota MR2

1 Answer

How do you replace a headlight globe?


There is a large rubber boot that covers the headlight globe . Pull it back, pinch the retainer spring and lift out the H4 globe.

Aug 15, 2014 | Cars & Trucks

1 Answer

Replace park bulb.vt commodore


To replace the front parklight globe on a vt commodore can be a little tricky.

1.turn the lights on to see which 1 is inoperative once you know turn lights off.
2.open bonnet
3.go to side that is inoperative and on the back of the headlight you will see a round large plastic cover turn this to release it.
4.under the headlight globe there will be 2 wires flow these to the park globe socket gently twist and pull it out.
5.once the sockets out and you can see the globe ,pull the globe out of socket.
6.push new globe into socket
7.refit the socket in headlight
8.refit all trims
9.turn lights on make sure new globe is work..

Jan 22, 2014 | Cars & Trucks

1 Answer

How to replace headlight bulb in 1987 toyota camra


For an 87 specifically, I don't know the answer, sorry. There were at least 3 designs used in the 93-94 models alone. If it is anything like them, you have to either

- press in the plastic barb clip on the centre of the wiring connector at the back of the globe housing, and pull down on the wiring connector to disconnect it. Then rotate the globe holder anticlockwise and withdraw it. Don't touch the new globe glass with your fingers, or if you have, clean it well with metho. Then installation is in reverse. Or for a different design,

- alternatively, unplug the electrical connector. Then turn the hard plastic cover, at the back of the headlight globe holder, anticlockwise and remove it. Then remove the rubber cover underneath. If you are replacing an outer bulb remove the bulb spring clip, first taking note of how it is fitted. On an inner globe there may be a covering socket over the globe itself. Remove that, and the spring clip underneath. Replace the globe. Installation is in reverse, making sure all bits are in position, and the 'lock' mark on the hard plastic cover is facing upwards.

Nov 16, 2011 | Toyota Camry Cars & Trucks

1 Answer

NEED TO REPLACE HEADLIGHT BULB ON 2000 HYUNDAI GLS V6


hi I have just repaired the front of a 2001 sonata classique to remove the headlight assembly remove two screws one one top on radiator bracket one on side towards grill gently wobble to remove from locating pin, to remove just globe unclipcover on back of assembly them unclip globe from inside simple task
cheer chris

Nov 29, 2010 | 2000 Hyundai Sonata

1 Answer

WHERE IS THE HEADLIGHT REPLACEMENT BULB LOCATED?


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess.

Nov 19, 2010 | 2000 Mercury Cougar

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

2 Answers

How to change globe on headlight ford focus 2005


avatar3.jpg

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal

Sep 18, 2009 | 2005 Ford Focus

1 Answer

How can I replace or clean my headlight globe of a 1998 Galant


Headlight globe, meaning the inside of the headlight? If thats what you mean, only way to do it, is to take the lens off, and in order to do that, you need to take out the headlight, take off the rubber backings and take out the light bulbs. Then preheat your oven to 210 degrees, stick your light in there for 10 minutes, and pry apart the lens, since the glue will melt. Dont forget to undo the clips that also hold the lens to the housing. After you pry off the lens, clean or whatever you need to do. Then reseat the lens and hook the clips, then back in the oven it goes for 10 mins. Then hold pressure on the lens untill glue hardens.

Hope that helps.

They will not have or sell replacement globes, it will come with the whole headlight.

May 29, 2009 | 1998 Mitsubishi Galant

1 Answer

I need to clean or replace the headlight globe


your headlights are leaking water inside, and with the heat from the bulbs it condenses into fogginess,let me give an idea! if you have access to the bottom of the light, drill a hole that the water can drain.
that might work.!

G

May 29, 2009 | 1998 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...