Question about 2007 Toyota Land Cruiser

1 Answer

Turning engine off without getting disconnected from a call

I have the 2008 land cruiser that allow u to ignite and switch engine off at a push of a button.
problem is that when im on my cell phone (connected to the car multimedia system via bluetooth), i will loose the call if i switch engine off. so i find myself sitting in the parking lot with engine on until im done with the call.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Solution is to have the shift lever in NEUTRAL when you turn the engine off. This puts the car into ACCESSORY mode.

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wipers wont turn off on Toyota ute


remove fuse from fuse box inside truck-to find which one is for wiper look at fuse box cover for listings. If not there do a search "2008 toyota land cruiser fuses".

Mar 01, 2015 | 2008 Toyota Land Cruiser V8

2 Answers

How do i turn of the red imobaliser light. It is not on when key in the ignition only when removed


is lamp in the CLUSTER? (not on ours)
no other lights stuck on (warning?)
are you saying the IMMO lamp glows, key out of car>?
that is a relay stuck. (or bad ignition switch or short there)
what country, this is USA site, so no country and no engine stated.
means all answer are wrong. (guessing)

it has its own theft deterrent ECU. (has power all the time,)
and the Immobilizer to main PCM.
my guess is one of 2 relays bad. (or input key switch bad to relay)
IG1 relay
and ( EFI-EOD) relay. can fail if above is stuck.


25397164-unf1iprsnlx2ajznacse1210-3-0.jpg

Feb 02, 2015 | 2001 Toyota Land Cruiser

1 Answer

How to reset the light on of fuel filter in th eodometer for the toyota land cruiser 2010


the first thing you do is to replace the fuel filter then disconnect the clogged sensor. a) turn the ignition swicth ON POSITION...b) after turning the ignition swich on,connect the clogging sensor connector within 3 to 60 seconds. c) check that the combinition meter's filter warning light turns off.

Aug 04, 2011 | 2007 Toyota Land Cruiser

1 Answer

I Have toyota land cruiser modle 1994 Engine is not started in the moring.


sounds like the fuel pump or regulator issue. fuel is draining back to the tank. try turning the ignition on and off 3 times without cranking the engine, then try to start it. If that works, replace the pump assembly, filter and regulator. airtex or delphi makes a great replacement alternative to an actual toyota part, and is much less money. Happy Motoring.

Mar 05, 2011 | 1994 Toyota Land Cruiser

1 Answer

In my 2008 Toyota Land Cruiser Prado there is a dashboard warning light flashing. They symbol is of a key and it blinks but the car is not starting and is just ticking when you turn the ignition


That is to show that the alarm system immobilisor is on. Shut everything off, close all the doors,windows etc. Lock the car. Then open the car using the remote handset or key and try to start the engine, if it still does not start , then you may have to take it to the dealer to check and reprogramme the system. BTW, did you disconnect the battery prior to this fault ? this would explain why the system is immobilised. Hope that helps

Apr 10, 2010 | 2002 Toyota Land Cruiser

2 Answers

How do i turn of the timing belt light on my 04 landcruiser 3 litre


Ive never heard of a timing belt light, but there is a maintenance light that can be reset. Here the procedure:

To reset the maintenance reminder light: Turn the ignition switch to the "ON" position. Set the odometer/trip display to the odometer (ODO) mode. Turn the ignition switch off. Depress and hold the trip meter reset button while turning the ignition switch to the on position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition switch to the off position. Turn the ignition switch to the on position. Confirm that the maintenance light goes out.
Let me know if this helped you out!

Mar 29, 2010 | 2004 Toyota Land Cruiser

2 Answers

What kind of oil for toyota land cruiser 2008


best u use mobil one synthetic motor oil

Jan 19, 2009 | 2008 Toyota Land Cruiser

1 Answer

Ignition wont switch off


I had same problem a few years back - turned out it was a bad starter. What was happening was that the starter was always powered on - so even if I shut the ignition off it would still run and I had to disconnect the battery.

Dec 29, 2008 | 1997 Toyota Land Cruiser

2 Answers

2008 Land Cruiser Ignition, shut off problems


im not sure if its helpful but you need to make sure that the led on the ignition button is green. if its yellow you should wait until it turns green. 

Aug 08, 2008 | 2007 Toyota Land Cruiser

1 Answer

2000 toyota land cruiser door power lock


This is normal if I'm reading this right. The door locks are supposed to pop up when you turn off the key when in "child proof" mode. The reading lamp is wired to prevent low battery conditions by only operating when the engine is running. Did you just get the car?

Jul 29, 2008 | 2000 Toyota Land Cruiser

Not finding what you are looking for?
2007 Toyota Land Cruiser Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...