Question about 2001 Volkswagen Cabrio

2 Answers

Door locks and keyless

The automatic door locks do not work. The switches on both doors don't work and the key less doesn't work. I listened for the relay click and I can not hear it. Where is the relay located? Where is the remote receiver located for the keyless? The big problem is I don't have any kind of component diagram.
Does anyone know where I can get that and a specific wiring diagram. I bought a Haynes manual for it but it is geared towards other models.
Thanks,
Bob

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The unit is located in the trunk on the right side, held by a strap

Posted on Aug 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

The remote unit will the on the drivers door but it depends up on the type of the unit.

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mervia. Why is central locking not locking any door?


It's only an educated guess. If all other locks switches are working it' either the switch panel itself or an electrical short. Switches are popular, get it checked first

Nov 22, 2015 | Vauxhall Cars & Trucks

1 Answer

Acura TL2005 driver door won't open with the keyless .


Does it lock or unlock with the switch inside? When you try the keyless do you hear any noises from inside the door?

Jul 28, 2015 | 2005 Acura TL

2 Answers

My keyless entry for my 2008 Volvo s 40 won't work. I've tried replacing the battery but it still doesn't work. Anything I may can do before spending money on a new key.?


How are you trying to open the door , button on key fob ? With this system you can pull up on the drivers handle an it activates Antennas in the external side door handles (C30/C70 front doors, S40/V50 rear doors)
  • Antennas in the passenger compartment and cargo compartment
  • An antenna in the rear bumper
  • Quick lock motors in the lock units in the side doors
  • The remote keyless entry (RKE) receiver receives a signal from the key
  • The switch in the clutch pedal (manual transmissions) or a signal from the brake pedal switch via the central electronic module (CEM) (automatic transmissions)
  • Key-in switch.
  • Switch in door handle and lock button on handle .
    If a door handle is pulled outward, a switch closes that wakes up the system and activates the antennas in the handles on the side where the handle has been pulled out. If a valid key is within a radius of approx. 1.5 metres from the handle, the relevant door will open and the vehicle will unlock one or several doors. Which doors are unlocked depends on the settings for the system. The vehicle can also be unlocked if the handle is affected on the tailgate.
  • Jan 29, 2015 | Volvo Cars & Trucks

    2 Answers

    Had the battery changed in 2007 nissan murano and now the chimes don't ring and the drivers doesn't automatically move back when opening the drivers door. How do I reset these?:


    Disconnecting the battery erases stored memory,after you connect the battery put the key in the ignition cylinder and turn the driver door switch on(open) and off (closed), on (open),the entry,exist function then becomes complete, and the return operation can be operated,

    Dec 30, 2012 | 2003 Nissan Murano

    1 Answer

    I have 98 Camry Le and the door locks lock automatically shortly after the doors are unlocked and the alarm will set also. What could be the problem? Alarm Control Box?


    if you use the keyless entry to unlock the vehicle & don't open a door within 30 secs.the vehicle will automatically lock & the alarm will reset,if you unlock it with the key this shouldn't happen.....cheers.

    Sep 01, 2011 | 1998 Toyota Camry

    2 Answers

    I used csorb's instructions to reprogram a master key for my 2000 Lexus RX300. The ignition works perfectly, but the doors don't lock or unlock.


    Hi!!
    I believe your alarm is in the PASSIVE MODE, here is how it works.

    PASSIVE MODE Setting (Arming) Anti-Theft System The system will automatically set 30 seconds after following methods are performed: Remove ignition key from ignition switch. Exit vehicle, and close all doors. After performing this, anti-theft indicator on left side of instrument panel will light continuously for about 30 seconds. After 30 seconds, anti-theft indicator will blink once per second. When system is set, doors cannot be locked or unlocked using door lock control switch.
    CANCELING THE ALARM AND REPROGRAMING MAY SOLVE YOUR PROBLEM.
    Canceling Anti-Theft System Setting (No Alarm) When system is set (armed), but alarm is not sounding, use one of following methods to cancel system setting:
    • Unlock left or right front door using key.
    • Unlock all doors using remote keyless entry system.
    • Insert key in ignition switch and turn to ON position (this is operative only when anti-theft system has not been triggered).
    HERE IS HOW TO REPROGRAM THE ALARM IN CASE YOU NEED TO RESET IT.
    PROGRAMMING
    PASSIVE MODE NOTE:Initial mode is passive mode off. If there is a different signal in middle of programming, signal is invalid.
    Programming Passive Mode Off
    • Remove ignition key from ignition key cylinder. Ensure all doors (including back door) and engine hood are closed and unlocked. Perform all of following methods within 30 seconds:
    • Lock or unlock any door with key or remote keyless entry system.
    • Open driver door.
    • Lock and unlock driver door lock knob 3 times.
    • After performing this, system should start force lock after 2 seconds. Perform all of following methods within 20 seconds:
    • Unlock driver door lock knob.
    • Close and open driver door 2 times.
    • Lock and unlock driver door lock knob.
    • After performing this, system should start force lock after 2 seconds. Passive mode should now be off.
    Programming Passive Mode On
    • Remove ignition key from key cylinder. Ensure all doors, engine hood and luggage compartment door are closed and unlocked. Perform all of following methods within 30 seconds:
    • Lock or unlock any door with key or remote keyless entry system.
    • Open driver door.
    • Lock and unlock driver door lock knob 3 times.
    • After performing this, system should start force lock after 2 seconds. Perform all of following methods within 20 seconds:
    • Unlock driver door lock knob.
    • Close and open driver door 4 times.
    • Lock and unlock driver door lock knob.
    • After performing this, system should start force lock after 2 seconds. Passive mode should now be on.
    If you need further assistance, please provide an email address to send more info on your security system
    Good Luck!! A 4 THUMBS UP rating would be greatly appreciated for this solution. Thank you for using FixYa!!

    Mar 01, 2011 | Lexus RX 300 Cars & Trucks

    1 Answer

    2003 Chevy Avalanche rear doors won't lock automatically


    The rear doors will not lock with the keyless remote, the drivers master switch

    May 27, 2009 | 2003 Chevrolet Avalanche

    1 Answer

    How can i program the key less?


    1. Close all the vehicle doors.
    2. Insert the ignition key into the ignition lock cylinder.
    3. Press and hold the DOOR unlock switch.
    4. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
    5. Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
    6. Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
    7. Repeat the previous step to program up to four transmitters.
    8. Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
    9. Operate the transmitter functions in order to verify correct system operation.

    Dec 03, 2008 | 1999 Chevrolet Astro

    Not finding what you are looking for?
    2001 Volkswagen Cabrio Logo

    339 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volkswagen Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21936 Answers

    yadayada
    yadayada

    Level 3 Expert

    60667 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Volkswagen Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...