Question about 1992 Ford Festiva

1 Answer

Motor change ok my teacher son has changed the motor in this 92 ford festiva. and the son said the new motor needs the codes put in it is this true?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 119 Answers

Do you know what codes he is referring to? I have never heard that one before.

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you have to take the motor out to change the front crank seal in a 91 ford festiva?


it would be easier but you can probably get away with loosening the engine mounts and letting the engine drop a little bit to gain acsess to the seal easier...

Mar 22, 2011 | 1991 Ford Festiva

1 Answer

How to remove clutch on 92 festiva and replace new one?


firstly are you very mechanically minded? if not dont attempt this as its not easy and will require special tools... such as the tool to line the clutch exactly in line with where the gearbox shaft goes into the motor.... if you are going to do it you need to search around the outside of the gearbox and undo all the bolots that hold it to the motor... once every bolt holding it on is removed you will need to pull or push it away from the motor so it can drop down ( the car will need to be on blocks or a hoist.... once gearbox is off you will need to remove the clutch and pressure plate .... i would recommend if you are replacing clutch to possibly do pressure plate also... once these are removed you will need to fi the new one.... this is where you need the alignment tool... without it you will more then likely not get it in the right spot.. once it is placed onto the motor you can think about putting the gearbox back in... same process as removing only in reverse.... hope this helps... i will once again mention you will need certain toolds to do this job easily... any more questions feel free to ask...

Mar 04, 2011 | 1992 Ford Festiva

1 Answer

92 festiva and i have oil in my air filter


rebuild engine!!but do compresion test first check dealer for compression spec if good look at pcv problems

Dec 22, 2009 | 1992 Ford Festiva

2 Answers

Need to change timing belt in 93 ford festiva but know nothing about cars, only have enough money to buy the belt and was told I already have the tools


Changing the timing belt is something that usually needs done if it has not been changed and the car has over $100,000 miles. Most Festivas last for a lot longer than that. Mine is going on well over 200,000! All you need is the Festiva shop manual which you can find on eBay for about $10 to $30, if you hunt around and wait for a bargain. The manual fully explains every step and makes it easy if you are mechanically inclined. If you are new to auto repair, make sure you have someone who knows what they are doing check it for you, so that the repair will be safe and last. If you have a large library near you, its possible to find a Chiltons or other brand of repair manual that covers your Festiva timing belt repair procedure.

Sep 26, 2009 | 1993 Ford Festiva

2 Answers

Ford festiva indicator light replacement


take cover off at lights inside the boot,there are two clips on the taillight squeeze them and the bulb unit should come off

Jul 16, 2009 | 1993 Ford Festiva

1 Answer

1992 Ford Festiva-Engine cutting out


Oooohhhh this was a frustraiting problem for me & my 91 Festy.
Tried a million things & spent a fortune & when all was done it was the
fuel pump all along. :-)

May 23, 2009 | 1992 Ford Festiva

1 Answer

/90 ford festiva no power to anything fusible


i would replaceing the fusible link that says main i am pretty sure that it is in the middle they will look good but can be bad

Feb 22, 2009 | 1990 Ford Festiva

1 Answer

'92 Ford Festiva stalls when overheats


it sounds like your radiator fan is not working. once your engine reaches a certan temp. the fan should come on to cool it down. also might be the thermostat is not opening. it is not good for the motor at all to over heat and stall. you could ruin your engine. i would change thermostat first and then run it till it starts getting hot to see if the fan kicks on. if it doesn't, it could be the coolant sensor or the fan itself. good luck.

Nov 26, 2008 | 1992 Ford Festiva

1 Answer

Change ford festiva front light bulb


Hello, the front light bulbs are easily changed by twisting the plastic holder in the back of the lamp that holds the bulb counter-clockwise. You turn it about a 1/4 turn and then it pulls out and you can switch bulbs. Do not touch the new bulb with your fingers because oil from your fingers will cause the bulb to burn out quickly.

Oct 20, 2008 | 1993 Ford Festiva

Not finding what you are looking for?
1992 Ford Festiva Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...