Question about 1990 Chevrolet Corvette

1 Answer

Turn signal problem

My turn signals are not working..i have replaced bulbs and sockets and fuses, still cant get it to work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,568 Answers

The first place I would have looked for a flasher problem is the falsher unit itself; if you didn't do this first, you may have wasted a good bit of time and money.

I can't tell you where it is hidden in your car but it is most likely under the dashboard.
Most are cylindrical in shape and are about 2-2 1/2" long and ~1 1/4 - 1 1/2 inches in diameter.

They are nomally plugged into a socket which may or may not be fastened onto a metal support.

Newer cars have mostly electronic flashers but yours should have the kind described.

They are constructed of a bimetal relay with a heating element wound around it and multiple contacts that are made to make and break with the heating and cooling of the bimetal element.

Posted on May 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Ford Edge Rear Left Turn Signal not working - Bulb and Socket confirmed good. Fuse Controlling both Left Front and Rear turn light confirmed good. Front Left turn light working fine.


The flasher is under the dash.If you turn on the signal listen for it's location.Turn on your 4 way flasher and see if the left rear light is flashing.If it's not then replace the bulb.If it still does'nt work after replacing the bulb check if there is power to the socket. Use a probe light.If no power to the socket.There is a break in the wire or worse the signal switch may be the culprit

Dec 18, 2017 | Ford Cars & Trucks

2 Answers

Left hand turn signal not working at all


First replace the turn signal light bulb. If that does not work check the voltage at the signal light bulb socket .there should be 12 volts there when youput on theleft turn signal. Normally thefuse for the signal should be for theleft and rightturn signal system. Sinceright turn signal is fune then it cannoy be the fuse.

Nov 25, 2017 | Cars & Trucks

2 Answers

Tail lights not working


ck fuse for rear taillights tis under the dash lower left of steering wheel. or if you still have the manual look in there under fuses.
also look for a bad ground but i doubt that.. if it's both rear out.
fast flashing well here's a chart with all sorts of info.
Problem What To Do Turn signals light, but do not flash Replace the flasher No turn signals light on either side Check the fuse. Replace if defective.
Check the flasher by substitution.
Check for open circuit, short circuit or poor ground. Both turn signals on one side don't work Check for bad bulbs.
Check for bad ground In both housings. One turn signal light on one side doesn't work Check and/or replace bulb.
Check for corrosion in socket. Clean contacts.
Check for poor ground at socket. Turn signal flashes too fast or too slow Check any bulb on the side flashing too fast. A heavy-duty bulb is probably installed In place of a regular bulb
Check the bulb flashing too slow. A standard bulb was probably installed in place of a heavy-duty bulb
Check for loose connections or corrosion at the bulb socket Indicator lights don't work in either direction Check If the turn signals are working
Check the dash indicator lights
Check the flasher by substitution One Indicator light doesn't light On systems with 1 dash indicator:
- See if the lights work on the same side. Often the filaments have been reversed In systems combining stoplights with taillights and turn signals
- Check the flasher by substitution On systems with 2 Indicators:
- Check the bulbs on the same side
- Check the indicator light bulb
- Check the flasher by substitution
hope this helps. may want to print for future reference. :)
hope this helps.

Dec 31, 2017 | GMC Suburban Cars & Trucks

2 Answers

Left turning signals not working


If your bulbs are fine and fuses are fine, it may be your bulb socket/sockets. with the blinker flashing, try playing with the wires on the bulb socket. push them in, push the bulb in and wiggle both around to make a connection. If it starts flashing, you need a new socket.

Nov 08, 2013 | Kia Sportage Cars & Trucks

1 Answer

Driverside back turning signal will not work, replaced all bulbs fuse tested ok, the passenger side these are both rear works


Your Questions is Confusing...

Your LEFT REAR is not working your RIGHT REAR is working? Either you have a Bulb that is Bad, Bulb Socket that is not working, or you have a GROUND Problem..

You need to also see if the TURN SIGNAL is working on the LEFT. If NOTHING is working then you know it is a Ground Issue. IF the BRAKE LIGHTS WORK and the Turn Signal does not, then it is the BULB.

Apr 08, 2013 | Cars & Trucks

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

3 Answers

Blower motor and turn signals stopped working


CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL IS GOOD.CHECK TO SEE IF BLOWER IS GETTING POWER.IF NOT.SWITCH IS BAD.IF YES REPLACE BLOWER MOTOR.IF TURN SIGNALS STOP WORKING.CHECK FUSE FIRST.IF FUSE LOOK GOOD. CHECK BULBS TO SEE IF THEY ARE BLOWN.IF BULBS LOOK GOOD PROBLEM COULD BE WORN OR CORRODED BULB SOCKETS OR.BAD GROUND.OR THE TURN SIGNAL SWITCH IS BAD.

Aug 24, 2009 | Plymouth Voyager Cars & Trucks

1 Answer

Turn signals dont work but still hear the clicking noise


Change the bulbs, my hubby had this problem in a 2002 focus, changed the bulbs and started working again

Mar 28, 2009 | 1994 Honda Civic Del Sol

Not finding what you are looking for?
1990 Chevrolet Corvette Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...