- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
both LOW BEAMS (you make this so hard not saying that...)
is car in canada, or usa? or a?
does car have DRL. we dont know ,until you say.
and both types work different, non- and DRL.
my answer (roll dice, ) USA. no DRL
the system is simple (alldata.com)
2 fues, left and right
2 relays, one left, one right.
1 controller box.
1 switch combo.
the sequence of events
HL switch on,
this ground the Low pin on the mutiplex control box in fuse box.
this box sends 2 ground signals to both relays.
so if one headlight works you know the mpx box works
both relays close
and 12v is sent to both low beams , and there other side is grounded full time so they glow.
there are 2 fuse left and right. fuse #15 and 17
its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much
Remove the socket cover. CAUTION: Do not touch the surface of the bulb with hands or dirty gloves as the bulb may pop after a short time. If the surface does become dirty, clean it with alcohol or thinner, and let it dry thoroughly before installing.
Release the bulb securing spring, and remove the bulb.
Replace the bulb, and connect the connector securely