04 chev 2500hd 6liter gives code p2135 replaced pedal pos. sensor still giving code only does when goes to high rpm when goes in passing gear volts drop and goes to reduced engine power
I'm getting that error on my mustang right now. This seems to be an issue with the TPS (Throttle Position Sensor) It seems in most cases with this error code that the sensor has gone bad and needs to be replaced. Thats my experience with a Ford car any way and it is about a 65 dollar part.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's a fault for the throttle position sensor. Hyundai has a TSB that says if you have the trouble code to replace the sensor and update the ECM software (Engine Control Module)
It is a throttle position sensor fault and is either signal or voltage correlation problem. Replacing the unit should fix the fault and if you consider your mechanic competent enough to do this then by all means give him the job.
should not have to pay for same part twice.take vechicle back to dealership tell them car not fixed you have same problem.let them know you payed them to fix car.same problem still exist.code p2135 problem could be the tps sensor or signal circuit to sensor wires and connector have a short or problem could be throttle body assembly damaged.
Firstly, I must ask: did you take your vehicle to a VW dealership? Did you witness this mechanic connect a scanner to your vehicle's computer to extract any Fault codes? Can you confirm he correctly diagnosed a faulty fuel pump?
Your vehicle is EOBDII compliant, therefore all electronic faults will be immediately stored in the computer and will just require a 15min process to read these codes.
By doing this, you will be able to correctly diagnose the fault and rectify the problem quickly (both fuel pump & speed sensor faults can be quickly identified in this manner).
If you did not take to a VW dealership, then only a garage equipped with the proper EOBD-II (European On-Board Diagnostics V2) scanning tool will be able to communicate with your vehicle's computer.
If in doubt, you should ask to see the code readout for yourself.
If you wish, you can post your codes on here - we will be happy to confirm what the codes mean.
"If this solution has resolved your problem, please be kind enough to leave a testimonial"
Hi,
if you feel confident in using a digital auto test meter. Disconnect the sensor, and check the value range with the test meter to ensure it is within the set parameters.
However, before embarking on that task. Some ECU's will display a fault code, but will require re-setting to clear the code. With a new sensor fitted the ECU should re-set, although some "hold" the code in memory, it does not come up as a visible fault. Some vehicles can be driven a few miles, then the ECU will learn that the new sensor is within specs and will react accordingly.
CODE PO120 - TP SENSOR 1 SIGNAL RANGE PERFORMANCE. CODE P1516 - TAC MODULE THROTTLE ACTUATOR POSITION PERFORMANCE. CODE P2135 - THROTTLE POSITION SENSOR 1 - 2 CORRELATION ERROR. THIS IS A DEALERSHIP FIX YOU HAVE PROBLEMS OR FAULTS IN THE THROTTLE POSITION SENSOR.
Code P1295,P2106 are malfunction in electronic throttle control. P2135 is a fault in throttle pedal position.It might have a crack in the intake manifold. Check with dealer for possible warranty.
×